upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1054 lines
26 KiB
1054 lines
26 KiB
/*
|
|
* Porting to u-boot:
|
|
*
|
|
* (C) Copyright 2011
|
|
* Stefano Babic, DENX Software Engineering, sbabic@denx.de.
|
|
*
|
|
* Copyright (C) 2008-2009 MontaVista Software Inc.
|
|
* Copyright (C) 2008-2009 Texas Instruments Inc
|
|
*
|
|
* Based on the LCD driver for TI Avalanche processors written by
|
|
* Ajay Singh and Shalom Hai.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <malloc.h>
|
|
#include <video_fb.h>
|
|
#include <linux/list.h>
|
|
#include <linux/fb.h>
|
|
|
|
#include <asm/errno.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/hardware.h>
|
|
|
|
#include "videomodes.h"
|
|
#include "da8xx-fb.h"
|
|
|
|
#if !defined(DA8XX_LCD_CNTL_BASE)
|
|
#define DA8XX_LCD_CNTL_BASE DAVINCI_LCD_CNTL_BASE
|
|
#endif
|
|
|
|
#define DRIVER_NAME "da8xx_lcdc"
|
|
|
|
#define LCD_VERSION_1 1
|
|
#define LCD_VERSION_2 2
|
|
|
|
/* LCD Status Register */
|
|
#define LCD_END_OF_FRAME1 (1 << 9)
|
|
#define LCD_END_OF_FRAME0 (1 << 8)
|
|
#define LCD_PL_LOAD_DONE (1 << 6)
|
|
#define LCD_FIFO_UNDERFLOW (1 << 5)
|
|
#define LCD_SYNC_LOST (1 << 2)
|
|
|
|
/* LCD DMA Control Register */
|
|
#define LCD_DMA_BURST_SIZE(x) ((x) << 4)
|
|
#define LCD_DMA_BURST_1 0x0
|
|
#define LCD_DMA_BURST_2 0x1
|
|
#define LCD_DMA_BURST_4 0x2
|
|
#define LCD_DMA_BURST_8 0x3
|
|
#define LCD_DMA_BURST_16 0x4
|
|
#define LCD_V1_END_OF_FRAME_INT_ENA (1 << 2)
|
|
#define LCD_V2_END_OF_FRAME0_INT_ENA (1 << 8)
|
|
#define LCD_V2_END_OF_FRAME1_INT_ENA (1 << 9)
|
|
#define LCD_DUAL_FRAME_BUFFER_ENABLE (1 << 0)
|
|
|
|
#define LCD_V2_TFT_24BPP_MODE (1 << 25)
|
|
#define LCD_V2_TFT_24BPP_UNPACK (1 << 26)
|
|
|
|
/* LCD Control Register */
|
|
#define LCD_CLK_DIVISOR(x) ((x) << 8)
|
|
#define LCD_RASTER_MODE 0x01
|
|
|
|
/* LCD Raster Control Register */
|
|
#define LCD_PALETTE_LOAD_MODE(x) ((x) << 20)
|
|
#define PALETTE_AND_DATA 0x00
|
|
#define PALETTE_ONLY 0x01
|
|
#define DATA_ONLY 0x02
|
|
|
|
#define LCD_MONO_8BIT_MODE (1 << 9)
|
|
#define LCD_RASTER_ORDER (1 << 8)
|
|
#define LCD_TFT_MODE (1 << 7)
|
|
#define LCD_V1_UNDERFLOW_INT_ENA (1 << 6)
|
|
#define LCD_V2_UNDERFLOW_INT_ENA (1 << 5)
|
|
#define LCD_V1_PL_INT_ENA (1 << 4)
|
|
#define LCD_V2_PL_INT_ENA (1 << 6)
|
|
#define LCD_MONOCHROME_MODE (1 << 1)
|
|
#define LCD_RASTER_ENABLE (1 << 0)
|
|
#define LCD_TFT_ALT_ENABLE (1 << 23)
|
|
#define LCD_STN_565_ENABLE (1 << 24)
|
|
#define LCD_V2_DMA_CLK_EN (1 << 2)
|
|
#define LCD_V2_LIDD_CLK_EN (1 << 1)
|
|
#define LCD_V2_CORE_CLK_EN (1 << 0)
|
|
#define LCD_V2_LPP_B10 26
|
|
#define LCD_V2_TFT_24BPP_MODE (1 << 25)
|
|
#define LCD_V2_TFT_24BPP_UNPACK (1 << 26)
|
|
|
|
/* LCD Raster Timing 2 Register */
|
|
#define LCD_AC_BIAS_TRANSITIONS_PER_INT(x) ((x) << 16)
|
|
#define LCD_AC_BIAS_FREQUENCY(x) ((x) << 8)
|
|
#define LCD_SYNC_CTRL (1 << 25)
|
|
#define LCD_SYNC_EDGE (1 << 24)
|
|
#define LCD_INVERT_PIXEL_CLOCK (1 << 22)
|
|
#define LCD_INVERT_LINE_CLOCK (1 << 21)
|
|
#define LCD_INVERT_FRAME_CLOCK (1 << 20)
|
|
|
|
/* Clock registers available only on Version 2 */
|
|
#define LCD_CLK_MAIN_RESET (1 << 3)
|
|
/* LCD Block */
|
|
struct da8xx_lcd_regs {
|
|
u32 revid;
|
|
u32 ctrl;
|
|
u32 stat;
|
|
u32 lidd_ctrl;
|
|
u32 lidd_cs0_conf;
|
|
u32 lidd_cs0_addr;
|
|
u32 lidd_cs0_data;
|
|
u32 lidd_cs1_conf;
|
|
u32 lidd_cs1_addr;
|
|
u32 lidd_cs1_data;
|
|
u32 raster_ctrl;
|
|
u32 raster_timing_0;
|
|
u32 raster_timing_1;
|
|
u32 raster_timing_2;
|
|
u32 raster_subpanel;
|
|
u32 reserved;
|
|
u32 dma_ctrl;
|
|
u32 dma_frm_buf_base_addr_0;
|
|
u32 dma_frm_buf_ceiling_addr_0;
|
|
u32 dma_frm_buf_base_addr_1;
|
|
u32 dma_frm_buf_ceiling_addr_1;
|
|
u32 resv1;
|
|
u32 raw_stat;
|
|
u32 masked_stat;
|
|
u32 int_ena_set;
|
|
u32 int_ena_clr;
|
|
u32 end_of_int_ind;
|
|
/* Clock registers available only on Version 2 */
|
|
u32 clk_ena;
|
|
u32 clk_reset;
|
|
};
|
|
|
|
#define LCD_NUM_BUFFERS 1
|
|
|
|
#define WSI_TIMEOUT 50
|
|
#define PALETTE_SIZE 256
|
|
#define LEFT_MARGIN 64
|
|
#define RIGHT_MARGIN 64
|
|
#define UPPER_MARGIN 32
|
|
#define LOWER_MARGIN 32
|
|
#define WAIT_FOR_FRAME_DONE true
|
|
#define NO_WAIT_FOR_FRAME_DONE false
|
|
|
|
#define calc_fbsize() (panel.plnSizeX * panel.plnSizeY * panel.gdfBytesPP)
|
|
|
|
static struct da8xx_lcd_regs *da8xx_fb_reg_base;
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* graphics setup */
|
|
static GraphicDevice gpanel;
|
|
static const struct da8xx_panel *lcd_panel;
|
|
static struct fb_info *da8xx_fb_info;
|
|
static int bits_x_pixel;
|
|
static unsigned int lcd_revision;
|
|
const struct lcd_ctrl_config *da8xx_lcd_cfg;
|
|
|
|
static inline unsigned int lcdc_read(u32 *addr)
|
|
{
|
|
return (unsigned int)readl(addr);
|
|
}
|
|
|
|
static inline void lcdc_write(unsigned int val, u32 *addr)
|
|
{
|
|
writel(val, addr);
|
|
}
|
|
|
|
struct da8xx_fb_par {
|
|
u32 p_palette_base;
|
|
unsigned char *v_palette_base;
|
|
dma_addr_t vram_phys;
|
|
unsigned long vram_size;
|
|
void *vram_virt;
|
|
unsigned int dma_start;
|
|
unsigned int dma_end;
|
|
struct clk *lcdc_clk;
|
|
int irq;
|
|
unsigned short pseudo_palette[16];
|
|
unsigned int palette_sz;
|
|
unsigned int pxl_clk;
|
|
int blank;
|
|
int vsync_flag;
|
|
int vsync_timeout;
|
|
};
|
|
|
|
|
|
/* Variable Screen Information */
|
|
static struct fb_var_screeninfo da8xx_fb_var = {
|
|
.xoffset = 0,
|
|
.yoffset = 0,
|
|
.transp = {0, 0, 0},
|
|
.nonstd = 0,
|
|
.activate = 0,
|
|
.height = -1,
|
|
.width = -1,
|
|
.pixclock = 46666, /* 46us - AUO display */
|
|
.accel_flags = 0,
|
|
.left_margin = LEFT_MARGIN,
|
|
.right_margin = RIGHT_MARGIN,
|
|
.upper_margin = UPPER_MARGIN,
|
|
.lower_margin = LOWER_MARGIN,
|
|
.sync = 0,
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
};
|
|
|
|
static struct fb_fix_screeninfo da8xx_fb_fix = {
|
|
.id = "DA8xx FB Drv",
|
|
.type = FB_TYPE_PACKED_PIXELS,
|
|
.type_aux = 0,
|
|
.visual = FB_VISUAL_PSEUDOCOLOR,
|
|
.xpanstep = 0,
|
|
.ypanstep = 1,
|
|
.ywrapstep = 0,
|
|
.accel = FB_ACCEL_NONE
|
|
};
|
|
|
|
/* Enable the Raster Engine of the LCD Controller */
|
|
static inline void lcd_enable_raster(void)
|
|
{
|
|
u32 reg;
|
|
|
|
/* Put LCDC in reset for several cycles */
|
|
if (lcd_revision == LCD_VERSION_2)
|
|
lcdc_write(LCD_CLK_MAIN_RESET,
|
|
&da8xx_fb_reg_base->clk_reset);
|
|
|
|
udelay(1000);
|
|
/* Bring LCDC out of reset */
|
|
if (lcd_revision == LCD_VERSION_2)
|
|
lcdc_write(0,
|
|
&da8xx_fb_reg_base->clk_reset);
|
|
|
|
udelay(1000);
|
|
|
|
reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl);
|
|
if (!(reg & LCD_RASTER_ENABLE))
|
|
lcdc_write(reg | LCD_RASTER_ENABLE,
|
|
&da8xx_fb_reg_base->raster_ctrl);
|
|
}
|
|
|
|
/* Disable the Raster Engine of the LCD Controller */
|
|
static inline void lcd_disable_raster(bool wait_for_frame_done)
|
|
{
|
|
u32 reg;
|
|
u32 loop_cnt = 0;
|
|
u32 stat;
|
|
u32 i = 0;
|
|
|
|
if (wait_for_frame_done)
|
|
loop_cnt = 5000;
|
|
|
|
reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl);
|
|
if (reg & LCD_RASTER_ENABLE)
|
|
lcdc_write(reg & ~LCD_RASTER_ENABLE,
|
|
&da8xx_fb_reg_base->raster_ctrl);
|
|
|
|
/* Wait for the current frame to complete */
|
|
do {
|
|
if (lcd_revision == LCD_VERSION_1)
|
|
stat = lcdc_read(&da8xx_fb_reg_base->stat);
|
|
else
|
|
stat = lcdc_read(&da8xx_fb_reg_base->raw_stat);
|
|
|
|
mdelay(1);
|
|
} while (!(stat & 0x01) && (i++ < loop_cnt));
|
|
|
|
if (lcd_revision == LCD_VERSION_1)
|
|
lcdc_write(stat, &da8xx_fb_reg_base->stat);
|
|
else
|
|
lcdc_write(stat, &da8xx_fb_reg_base->raw_stat);
|
|
|
|
if ((loop_cnt != 0) && (i >= loop_cnt)) {
|
|
printf("LCD Controller timed out\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
static void lcd_blit(int load_mode, struct da8xx_fb_par *par)
|
|
{
|
|
u32 start;
|
|
u32 end;
|
|
u32 reg_ras;
|
|
u32 reg_dma;
|
|
u32 reg_int;
|
|
|
|
/* init reg to clear PLM (loading mode) fields */
|
|
reg_ras = lcdc_read(&da8xx_fb_reg_base->raster_ctrl);
|
|
reg_ras &= ~(3 << 20);
|
|
|
|
reg_dma = lcdc_read(&da8xx_fb_reg_base->dma_ctrl);
|
|
|
|
if (load_mode == LOAD_DATA) {
|
|
start = par->dma_start;
|
|
end = par->dma_end;
|
|
|
|
reg_ras |= LCD_PALETTE_LOAD_MODE(DATA_ONLY);
|
|
if (lcd_revision == LCD_VERSION_1) {
|
|
reg_dma |= LCD_V1_END_OF_FRAME_INT_ENA;
|
|
} else {
|
|
reg_int = lcdc_read(&da8xx_fb_reg_base->int_ena_set) |
|
|
LCD_V2_END_OF_FRAME0_INT_ENA |
|
|
LCD_V2_END_OF_FRAME1_INT_ENA |
|
|
LCD_V2_UNDERFLOW_INT_ENA | LCD_SYNC_LOST;
|
|
lcdc_write(reg_int, &da8xx_fb_reg_base->int_ena_set);
|
|
}
|
|
|
|
#if (LCD_NUM_BUFFERS == 2)
|
|
reg_dma |= LCD_DUAL_FRAME_BUFFER_ENABLE;
|
|
lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_0);
|
|
lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0);
|
|
lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_1);
|
|
lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_1);
|
|
#else
|
|
reg_dma &= ~LCD_DUAL_FRAME_BUFFER_ENABLE;
|
|
lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_0);
|
|
lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0);
|
|
lcdc_write(0, &da8xx_fb_reg_base->dma_frm_buf_base_addr_1);
|
|
lcdc_write(0, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_1);
|
|
#endif
|
|
|
|
} else if (load_mode == LOAD_PALETTE) {
|
|
start = par->p_palette_base;
|
|
end = start + par->palette_sz - 1;
|
|
|
|
reg_ras |= LCD_PALETTE_LOAD_MODE(PALETTE_ONLY);
|
|
if (lcd_revision == LCD_VERSION_1) {
|
|
reg_ras |= LCD_V1_PL_INT_ENA;
|
|
} else {
|
|
reg_int = lcdc_read(&da8xx_fb_reg_base->int_ena_set) |
|
|
LCD_V2_PL_INT_ENA;
|
|
lcdc_write(reg_int, &da8xx_fb_reg_base->int_ena_set);
|
|
}
|
|
|
|
lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_0);
|
|
lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0);
|
|
}
|
|
|
|
lcdc_write(reg_dma, &da8xx_fb_reg_base->dma_ctrl);
|
|
lcdc_write(reg_ras, &da8xx_fb_reg_base->raster_ctrl);
|
|
|
|
/*
|
|
* The Raster enable bit must be set after all other control fields are
|
|
* set.
|
|
*/
|
|
lcd_enable_raster();
|
|
}
|
|
|
|
/* Configure the Burst Size of DMA */
|
|
static int lcd_cfg_dma(int burst_size)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = lcdc_read(&da8xx_fb_reg_base->dma_ctrl) & 0x00000001;
|
|
switch (burst_size) {
|
|
case 1:
|
|
reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_1);
|
|
break;
|
|
case 2:
|
|
reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_2);
|
|
break;
|
|
case 4:
|
|
reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_4);
|
|
break;
|
|
case 8:
|
|
reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_8);
|
|
break;
|
|
case 16:
|
|
reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_16);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
lcdc_write(reg, &da8xx_fb_reg_base->dma_ctrl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void lcd_cfg_ac_bias(int period, int transitions_per_int)
|
|
{
|
|
u32 reg;
|
|
|
|
/* Set the AC Bias Period and Number of Transisitons per Interrupt */
|
|
reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_2) & 0xFFF00000;
|
|
reg |= LCD_AC_BIAS_FREQUENCY(period) |
|
|
LCD_AC_BIAS_TRANSITIONS_PER_INT(transitions_per_int);
|
|
lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_2);
|
|
}
|
|
|
|
static void lcd_cfg_horizontal_sync(int back_porch, int pulse_width,
|
|
int front_porch)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_0) & 0xf;
|
|
reg |= ((back_porch & 0xff) << 24)
|
|
| ((front_porch & 0xff) << 16)
|
|
| ((pulse_width & 0x3f) << 10);
|
|
lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_0);
|
|
}
|
|
|
|
static void lcd_cfg_vertical_sync(int back_porch, int pulse_width,
|
|
int front_porch)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_1) & 0x3ff;
|
|
reg |= ((back_porch & 0xff) << 24)
|
|
| ((front_porch & 0xff) << 16)
|
|
| ((pulse_width & 0x3f) << 10);
|
|
lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_1);
|
|
}
|
|
|
|
static int lcd_cfg_display(const struct lcd_ctrl_config *cfg)
|
|
{
|
|
u32 reg;
|
|
u32 reg_int;
|
|
|
|
reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & ~(LCD_TFT_MODE |
|
|
LCD_MONO_8BIT_MODE |
|
|
LCD_MONOCHROME_MODE);
|
|
|
|
switch (cfg->p_disp_panel->panel_shade) {
|
|
case MONOCHROME:
|
|
reg |= LCD_MONOCHROME_MODE;
|
|
if (cfg->mono_8bit_mode)
|
|
reg |= LCD_MONO_8BIT_MODE;
|
|
break;
|
|
case COLOR_ACTIVE:
|
|
reg |= LCD_TFT_MODE;
|
|
if (cfg->tft_alt_mode)
|
|
reg |= LCD_TFT_ALT_ENABLE;
|
|
break;
|
|
|
|
case COLOR_PASSIVE:
|
|
if (cfg->stn_565_mode)
|
|
reg |= LCD_STN_565_ENABLE;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* enable additional interrupts here */
|
|
if (lcd_revision == LCD_VERSION_1) {
|
|
reg |= LCD_V1_UNDERFLOW_INT_ENA;
|
|
} else {
|
|
reg_int = lcdc_read(&da8xx_fb_reg_base->int_ena_set) |
|
|
LCD_V2_UNDERFLOW_INT_ENA;
|
|
lcdc_write(reg_int, &da8xx_fb_reg_base->int_ena_set);
|
|
}
|
|
|
|
lcdc_write(reg, &da8xx_fb_reg_base->raster_ctrl);
|
|
|
|
reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_2);
|
|
|
|
if (cfg->sync_ctrl)
|
|
reg |= LCD_SYNC_CTRL;
|
|
else
|
|
reg &= ~LCD_SYNC_CTRL;
|
|
|
|
if (cfg->sync_edge)
|
|
reg |= LCD_SYNC_EDGE;
|
|
else
|
|
reg &= ~LCD_SYNC_EDGE;
|
|
|
|
if (cfg->invert_line_clock)
|
|
reg |= LCD_INVERT_LINE_CLOCK;
|
|
else
|
|
reg &= ~LCD_INVERT_LINE_CLOCK;
|
|
|
|
if (cfg->invert_frm_clock)
|
|
reg |= LCD_INVERT_FRAME_CLOCK;
|
|
else
|
|
reg &= ~LCD_INVERT_FRAME_CLOCK;
|
|
|
|
lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lcd_cfg_frame_buffer(struct da8xx_fb_par *par, u32 width, u32 height,
|
|
u32 bpp, u32 raster_order)
|
|
{
|
|
u32 reg;
|
|
|
|
/* Set the Panel Width */
|
|
/* Pixels per line = (PPL + 1)*16 */
|
|
if (lcd_revision == LCD_VERSION_1) {
|
|
/*
|
|
* 0x3F in bits 4..9 gives max horisontal resolution = 1024
|
|
* pixels
|
|
*/
|
|
width &= 0x3f0;
|
|
} else {
|
|
/*
|
|
* 0x7F in bits 4..10 gives max horizontal resolution = 2048
|
|
* pixels.
|
|
*/
|
|
width &= 0x7f0;
|
|
}
|
|
reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_0);
|
|
reg &= 0xfffffc00;
|
|
if (lcd_revision == LCD_VERSION_1) {
|
|
reg |= ((width >> 4) - 1) << 4;
|
|
} else {
|
|
width = (width >> 4) - 1;
|
|
reg |= ((width & 0x3f) << 4) | ((width & 0x40) >> 3);
|
|
}
|
|
lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_0);
|
|
|
|
/* Set the Panel Height */
|
|
/* Set bits 9:0 of Lines Per Pixel */
|
|
reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_1);
|
|
reg = ((height - 1) & 0x3ff) | (reg & 0xfffffc00);
|
|
lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_1);
|
|
|
|
/* Set bit 10 of Lines Per Pixel */
|
|
if (lcd_revision == LCD_VERSION_2) {
|
|
reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_2);
|
|
reg |= ((height - 1) & 0x400) << 16;
|
|
lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_2);
|
|
}
|
|
|
|
/* Set the Raster Order of the Frame Buffer */
|
|
reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & ~(1 << 8);
|
|
if (raster_order)
|
|
reg |= LCD_RASTER_ORDER;
|
|
|
|
if (bpp == 24)
|
|
reg |= (LCD_TFT_MODE | LCD_V2_TFT_24BPP_MODE);
|
|
else if (bpp == 32)
|
|
reg |= (LCD_TFT_MODE | LCD_V2_TFT_24BPP_MODE
|
|
| LCD_V2_TFT_24BPP_UNPACK);
|
|
|
|
lcdc_write(reg, &da8xx_fb_reg_base->raster_ctrl);
|
|
|
|
switch (bpp) {
|
|
case 1:
|
|
case 2:
|
|
case 4:
|
|
case 16:
|
|
case 24:
|
|
case 32:
|
|
par->palette_sz = 16 * 2;
|
|
break;
|
|
|
|
case 8:
|
|
par->palette_sz = 256 * 2;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fb_setcolreg(unsigned regno, unsigned red, unsigned green,
|
|
unsigned blue, unsigned transp,
|
|
struct fb_info *info)
|
|
{
|
|
struct da8xx_fb_par *par = info->par;
|
|
unsigned short *palette = (unsigned short *) par->v_palette_base;
|
|
u_short pal;
|
|
int update_hw = 0;
|
|
|
|
if (regno > 255)
|
|
return 1;
|
|
|
|
if (info->fix.visual == FB_VISUAL_DIRECTCOLOR)
|
|
return 1;
|
|
|
|
if (info->var.bits_per_pixel == 8) {
|
|
red >>= 4;
|
|
green >>= 8;
|
|
blue >>= 12;
|
|
|
|
pal = (red & 0x0f00);
|
|
pal |= (green & 0x00f0);
|
|
pal |= (blue & 0x000f);
|
|
|
|
if (palette[regno] != pal) {
|
|
update_hw = 1;
|
|
palette[regno] = pal;
|
|
}
|
|
} else if ((info->var.bits_per_pixel == 16) && regno < 16) {
|
|
red >>= (16 - info->var.red.length);
|
|
red <<= info->var.red.offset;
|
|
|
|
green >>= (16 - info->var.green.length);
|
|
green <<= info->var.green.offset;
|
|
|
|
blue >>= (16 - info->var.blue.length);
|
|
blue <<= info->var.blue.offset;
|
|
|
|
par->pseudo_palette[regno] = red | green | blue;
|
|
|
|
if (palette[0] != 0x4000) {
|
|
update_hw = 1;
|
|
palette[0] = 0x4000;
|
|
}
|
|
} else if (((info->var.bits_per_pixel == 32) && regno < 32) ||
|
|
((info->var.bits_per_pixel == 24) && regno < 24)) {
|
|
red >>= (24 - info->var.red.length);
|
|
red <<= info->var.red.offset;
|
|
|
|
green >>= (24 - info->var.green.length);
|
|
green <<= info->var.green.offset;
|
|
|
|
blue >>= (24 - info->var.blue.length);
|
|
blue <<= info->var.blue.offset;
|
|
|
|
par->pseudo_palette[regno] = red | green | blue;
|
|
|
|
if (palette[0] != 0x4000) {
|
|
update_hw = 1;
|
|
palette[0] = 0x4000;
|
|
}
|
|
}
|
|
|
|
/* Update the palette in the h/w as needed. */
|
|
if (update_hw)
|
|
lcd_blit(LOAD_PALETTE, par);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void lcd_reset(struct da8xx_fb_par *par)
|
|
{
|
|
/* Disable the Raster if previously Enabled */
|
|
lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE);
|
|
|
|
/* DMA has to be disabled */
|
|
lcdc_write(0, &da8xx_fb_reg_base->dma_ctrl);
|
|
lcdc_write(0, &da8xx_fb_reg_base->raster_ctrl);
|
|
|
|
if (lcd_revision == LCD_VERSION_2) {
|
|
lcdc_write(0, &da8xx_fb_reg_base->int_ena_set);
|
|
/* Write 1 to reset */
|
|
lcdc_write(LCD_CLK_MAIN_RESET, &da8xx_fb_reg_base->clk_reset);
|
|
lcdc_write(0, &da8xx_fb_reg_base->clk_reset);
|
|
}
|
|
}
|
|
|
|
static void lcd_calc_clk_divider(struct da8xx_fb_par *par)
|
|
{
|
|
unsigned int lcd_clk, div;
|
|
|
|
/* Get clock from sysclk2 */
|
|
lcd_clk = clk_get(2);
|
|
|
|
div = lcd_clk / par->pxl_clk;
|
|
debug("LCD Clock: %d Divider: %d PixClk: %d\n",
|
|
lcd_clk, div, par->pxl_clk);
|
|
|
|
/* Configure the LCD clock divisor. */
|
|
lcdc_write(LCD_CLK_DIVISOR(div) |
|
|
(LCD_RASTER_MODE & 0x1), &da8xx_fb_reg_base->ctrl);
|
|
|
|
if (lcd_revision == LCD_VERSION_2)
|
|
lcdc_write(LCD_V2_DMA_CLK_EN | LCD_V2_LIDD_CLK_EN |
|
|
LCD_V2_CORE_CLK_EN,
|
|
&da8xx_fb_reg_base->clk_ena);
|
|
}
|
|
|
|
static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg,
|
|
const struct da8xx_panel *panel)
|
|
{
|
|
u32 bpp;
|
|
int ret = 0;
|
|
|
|
lcd_reset(par);
|
|
|
|
/* Calculate the divider */
|
|
lcd_calc_clk_divider(par);
|
|
|
|
if (panel->invert_pxl_clk)
|
|
lcdc_write((lcdc_read(&da8xx_fb_reg_base->raster_timing_2) |
|
|
LCD_INVERT_PIXEL_CLOCK),
|
|
&da8xx_fb_reg_base->raster_timing_2);
|
|
else
|
|
lcdc_write((lcdc_read(&da8xx_fb_reg_base->raster_timing_2) &
|
|
~LCD_INVERT_PIXEL_CLOCK),
|
|
&da8xx_fb_reg_base->raster_timing_2);
|
|
|
|
/* Configure the DMA burst size. */
|
|
ret = lcd_cfg_dma(cfg->dma_burst_sz);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Configure the AC bias properties. */
|
|
lcd_cfg_ac_bias(cfg->ac_bias, cfg->ac_bias_intrpt);
|
|
|
|
/* Configure the vertical and horizontal sync properties. */
|
|
lcd_cfg_vertical_sync(panel->vbp, panel->vsw, panel->vfp);
|
|
lcd_cfg_horizontal_sync(panel->hbp, panel->hsw, panel->hfp);
|
|
|
|
/* Configure for disply */
|
|
ret = lcd_cfg_display(cfg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if ((QVGA != cfg->p_disp_panel->panel_type) &&
|
|
(WVGA != cfg->p_disp_panel->panel_type))
|
|
return -EINVAL;
|
|
|
|
if (cfg->bpp <= cfg->p_disp_panel->max_bpp &&
|
|
cfg->bpp >= cfg->p_disp_panel->min_bpp)
|
|
bpp = cfg->bpp;
|
|
else
|
|
bpp = cfg->p_disp_panel->max_bpp;
|
|
if (bpp == 12)
|
|
bpp = 16;
|
|
ret = lcd_cfg_frame_buffer(par, (unsigned int)panel->width,
|
|
(unsigned int)panel->height, bpp,
|
|
cfg->raster_order);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Configure FDD */
|
|
lcdc_write((lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & 0xfff00fff) |
|
|
(cfg->fdd << 12), &da8xx_fb_reg_base->raster_ctrl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void lcdc_dma_start(void)
|
|
{
|
|
struct da8xx_fb_par *par = da8xx_fb_info->par;
|
|
lcdc_write(par->dma_start,
|
|
&da8xx_fb_reg_base->dma_frm_buf_base_addr_0);
|
|
lcdc_write(par->dma_end,
|
|
&da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0);
|
|
lcdc_write(0,
|
|
&da8xx_fb_reg_base->dma_frm_buf_base_addr_1);
|
|
lcdc_write(0,
|
|
&da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_1);
|
|
}
|
|
|
|
static u32 lcdc_irq_handler_rev01(void)
|
|
{
|
|
struct da8xx_fb_par *par = da8xx_fb_info->par;
|
|
u32 stat = lcdc_read(&da8xx_fb_reg_base->stat);
|
|
u32 reg_ras;
|
|
|
|
if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) {
|
|
debug("LCD_SYNC_LOST\n");
|
|
lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE);
|
|
lcdc_write(stat, &da8xx_fb_reg_base->stat);
|
|
lcd_enable_raster();
|
|
return LCD_SYNC_LOST;
|
|
} else if (stat & LCD_PL_LOAD_DONE) {
|
|
debug("LCD_PL_LOAD_DONE\n");
|
|
/*
|
|
* Must disable raster before changing state of any control bit.
|
|
* And also must be disabled before clearing the PL loading
|
|
* interrupt via the following write to the status register. If
|
|
* this is done after then one gets multiple PL done interrupts.
|
|
*/
|
|
lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE);
|
|
|
|
lcdc_write(stat, &da8xx_fb_reg_base->stat);
|
|
|
|
/* Disable PL completion inerrupt */
|
|
reg_ras = lcdc_read(&da8xx_fb_reg_base->raster_ctrl);
|
|
reg_ras &= ~LCD_V1_PL_INT_ENA;
|
|
lcdc_write(reg_ras, &da8xx_fb_reg_base->raster_ctrl);
|
|
|
|
/* Setup and start data loading mode */
|
|
lcd_blit(LOAD_DATA, par);
|
|
return LCD_PL_LOAD_DONE;
|
|
} else {
|
|
lcdc_write(stat, &da8xx_fb_reg_base->stat);
|
|
|
|
if (stat & LCD_END_OF_FRAME0)
|
|
debug("LCD_END_OF_FRAME0\n");
|
|
|
|
lcdc_write(par->dma_start,
|
|
&da8xx_fb_reg_base->dma_frm_buf_base_addr_0);
|
|
lcdc_write(par->dma_end,
|
|
&da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0);
|
|
par->vsync_flag = 1;
|
|
return LCD_END_OF_FRAME0;
|
|
}
|
|
return stat;
|
|
}
|
|
|
|
static u32 lcdc_irq_handler_rev02(void)
|
|
{
|
|
struct da8xx_fb_par *par = da8xx_fb_info->par;
|
|
u32 stat = lcdc_read(&da8xx_fb_reg_base->masked_stat);
|
|
u32 reg_int;
|
|
|
|
if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) {
|
|
debug("LCD_SYNC_LOST\n");
|
|
lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE);
|
|
lcdc_write(stat, &da8xx_fb_reg_base->masked_stat);
|
|
lcd_enable_raster();
|
|
lcdc_write(0, &da8xx_fb_reg_base->end_of_int_ind);
|
|
return LCD_SYNC_LOST;
|
|
} else if (stat & LCD_PL_LOAD_DONE) {
|
|
debug("LCD_PL_LOAD_DONE\n");
|
|
/*
|
|
* Must disable raster before changing state of any control bit.
|
|
* And also must be disabled before clearing the PL loading
|
|
* interrupt via the following write to the status register. If
|
|
* this is done after then one gets multiple PL done interrupts.
|
|
*/
|
|
lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE);
|
|
|
|
lcdc_write(stat, &da8xx_fb_reg_base->masked_stat);
|
|
|
|
/* Disable PL completion inerrupt */
|
|
reg_int = lcdc_read(&da8xx_fb_reg_base->int_ena_clr) |
|
|
(LCD_V2_PL_INT_ENA);
|
|
lcdc_write(reg_int, &da8xx_fb_reg_base->int_ena_clr);
|
|
|
|
/* Setup and start data loading mode */
|
|
lcd_blit(LOAD_DATA, par);
|
|
lcdc_write(0, &da8xx_fb_reg_base->end_of_int_ind);
|
|
return LCD_PL_LOAD_DONE;
|
|
} else {
|
|
lcdc_write(stat, &da8xx_fb_reg_base->masked_stat);
|
|
|
|
if (stat & LCD_END_OF_FRAME0)
|
|
debug("LCD_END_OF_FRAME0\n");
|
|
|
|
lcdc_write(par->dma_start,
|
|
&da8xx_fb_reg_base->dma_frm_buf_base_addr_0);
|
|
lcdc_write(par->dma_end,
|
|
&da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0);
|
|
par->vsync_flag = 1;
|
|
lcdc_write(0, &da8xx_fb_reg_base->end_of_int_ind);
|
|
return LCD_END_OF_FRAME0;
|
|
}
|
|
lcdc_write(0, &da8xx_fb_reg_base->end_of_int_ind);
|
|
return stat;
|
|
}
|
|
|
|
static u32 lcdc_irq_handler(void)
|
|
{
|
|
if (lcd_revision == LCD_VERSION_1)
|
|
return lcdc_irq_handler_rev01();
|
|
else
|
|
return lcdc_irq_handler_rev02();
|
|
}
|
|
|
|
static u32 wait_for_event(u32 event)
|
|
{
|
|
u32 timeout = 50000;
|
|
u32 ret;
|
|
|
|
do {
|
|
ret = lcdc_irq_handler();
|
|
udelay(1000);
|
|
} while (!(ret & event));
|
|
|
|
if (timeout <= 0) {
|
|
printf("%s: event %d not hit\n", __func__, event);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
void *video_hw_init(void)
|
|
{
|
|
struct da8xx_fb_par *par;
|
|
u32 size;
|
|
u32 rev;
|
|
char *p;
|
|
|
|
if (!lcd_panel) {
|
|
printf("Display not initialized\n");
|
|
return NULL;
|
|
}
|
|
gpanel.winSizeX = lcd_panel->width;
|
|
gpanel.winSizeY = lcd_panel->height;
|
|
gpanel.plnSizeX = lcd_panel->width;
|
|
gpanel.plnSizeY = lcd_panel->height;
|
|
|
|
switch (bits_x_pixel) {
|
|
case 32:
|
|
gpanel.gdfBytesPP = 4;
|
|
gpanel.gdfIndex = GDF_32BIT_X888RGB;
|
|
break;
|
|
case 24:
|
|
gpanel.gdfBytesPP = 4;
|
|
gpanel.gdfIndex = GDF_32BIT_X888RGB;
|
|
break;
|
|
case 16:
|
|
gpanel.gdfBytesPP = 2;
|
|
gpanel.gdfIndex = GDF_16BIT_565RGB;
|
|
break;
|
|
default:
|
|
gpanel.gdfBytesPP = 1;
|
|
gpanel.gdfIndex = GDF__8BIT_INDEX;
|
|
break;
|
|
}
|
|
|
|
da8xx_fb_reg_base = (struct da8xx_lcd_regs *)DA8XX_LCD_CNTL_BASE;
|
|
|
|
/* Determine LCD IP Version */
|
|
rev = lcdc_read(&da8xx_fb_reg_base->revid);
|
|
switch (rev) {
|
|
case 0x4C100102:
|
|
lcd_revision = LCD_VERSION_1;
|
|
break;
|
|
case 0x4F200800:
|
|
case 0x4F201000:
|
|
lcd_revision = LCD_VERSION_2;
|
|
break;
|
|
default:
|
|
printf("Unknown PID Reg value 0x%x, defaulting to LCD revision 1\n",
|
|
rev);
|
|
lcd_revision = LCD_VERSION_1;
|
|
break;
|
|
}
|
|
|
|
debug("rev: 0x%x Resolution: %dx%d %d\n", rev,
|
|
gpanel.winSizeX,
|
|
gpanel.winSizeY,
|
|
da8xx_lcd_cfg->bpp);
|
|
|
|
size = sizeof(struct fb_info) + sizeof(struct da8xx_fb_par);
|
|
da8xx_fb_info = malloc(size);
|
|
debug("da8xx_fb_info at %x\n", (unsigned int)da8xx_fb_info);
|
|
|
|
if (!da8xx_fb_info) {
|
|
printf("Memory allocation failed for fb_info\n");
|
|
return NULL;
|
|
}
|
|
memset(da8xx_fb_info, 0, size);
|
|
p = (char *)da8xx_fb_info;
|
|
da8xx_fb_info->par = p + sizeof(struct fb_info);
|
|
debug("da8xx_par at %x\n", (unsigned int)da8xx_fb_info->par);
|
|
|
|
par = da8xx_fb_info->par;
|
|
par->pxl_clk = lcd_panel->pxl_clk;
|
|
|
|
if (lcd_init(par, da8xx_lcd_cfg, lcd_panel) < 0) {
|
|
printf("lcd_init failed\n");
|
|
goto err_release_fb;
|
|
}
|
|
|
|
/* allocate frame buffer */
|
|
par->vram_size = lcd_panel->width * lcd_panel->height *
|
|
da8xx_lcd_cfg->bpp;
|
|
par->vram_size = par->vram_size * LCD_NUM_BUFFERS / 8;
|
|
|
|
par->vram_virt = malloc(par->vram_size);
|
|
|
|
par->vram_phys = (dma_addr_t) par->vram_virt;
|
|
debug("Requesting 0x%x bytes for framebuffer at 0x%x\n",
|
|
(unsigned int)par->vram_size,
|
|
(unsigned int)par->vram_virt);
|
|
if (!par->vram_virt) {
|
|
printf("GLCD: malloc for frame buffer failed\n");
|
|
goto err_release_fb;
|
|
}
|
|
gd->fb_base = (int)par->vram_virt;
|
|
|
|
gpanel.frameAdrs = (unsigned int)par->vram_virt;
|
|
da8xx_fb_info->screen_base = (char *) par->vram_virt;
|
|
da8xx_fb_fix.smem_start = gpanel.frameAdrs;
|
|
da8xx_fb_fix.smem_len = par->vram_size;
|
|
da8xx_fb_fix.line_length = (lcd_panel->width * da8xx_lcd_cfg->bpp) / 8;
|
|
|
|
par->dma_start = par->vram_phys;
|
|
par->dma_end = par->dma_start + lcd_panel->height *
|
|
da8xx_fb_fix.line_length - 1;
|
|
|
|
/* allocate palette buffer */
|
|
par->v_palette_base = malloc(PALETTE_SIZE);
|
|
if (!par->v_palette_base) {
|
|
printf("GLCD: malloc for palette buffer failed\n");
|
|
goto err_release_fb_mem;
|
|
}
|
|
memset(par->v_palette_base, 0, PALETTE_SIZE);
|
|
par->p_palette_base = (unsigned int)par->v_palette_base;
|
|
|
|
/* Initialize par */
|
|
da8xx_fb_info->var.bits_per_pixel = da8xx_lcd_cfg->bpp;
|
|
|
|
da8xx_fb_var.xres = lcd_panel->width;
|
|
da8xx_fb_var.xres_virtual = lcd_panel->width;
|
|
|
|
da8xx_fb_var.yres = lcd_panel->height;
|
|
da8xx_fb_var.yres_virtual = lcd_panel->height * LCD_NUM_BUFFERS;
|
|
|
|
da8xx_fb_var.grayscale =
|
|
da8xx_lcd_cfg->p_disp_panel->panel_shade == MONOCHROME ? 1 : 0;
|
|
da8xx_fb_var.bits_per_pixel = da8xx_lcd_cfg->bpp;
|
|
|
|
da8xx_fb_var.hsync_len = lcd_panel->hsw;
|
|
da8xx_fb_var.vsync_len = lcd_panel->vsw;
|
|
|
|
/* Initialize fbinfo */
|
|
da8xx_fb_info->flags = FBINFO_FLAG_DEFAULT;
|
|
da8xx_fb_info->fix = da8xx_fb_fix;
|
|
da8xx_fb_info->var = da8xx_fb_var;
|
|
da8xx_fb_info->pseudo_palette = par->pseudo_palette;
|
|
da8xx_fb_info->fix.visual = (da8xx_fb_info->var.bits_per_pixel <= 8) ?
|
|
FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
|
|
|
|
/* Clear interrupt */
|
|
memset((void *)par->vram_virt, 0, par->vram_size);
|
|
lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE);
|
|
if (lcd_revision == LCD_VERSION_1)
|
|
lcdc_write(0xFFFF, &da8xx_fb_reg_base->stat);
|
|
else
|
|
lcdc_write(0xFFFF, &da8xx_fb_reg_base->masked_stat);
|
|
debug("Palette at 0x%x size %d\n", par->p_palette_base,
|
|
par->palette_sz);
|
|
lcdc_dma_start();
|
|
|
|
/* Load a default palette */
|
|
fb_setcolreg(0, 0, 0, 0, 0xffff, da8xx_fb_info);
|
|
|
|
/* Check that the palette is loaded */
|
|
wait_for_event(LCD_PL_LOAD_DONE);
|
|
|
|
/* Wait until DMA is working */
|
|
wait_for_event(LCD_END_OF_FRAME0);
|
|
|
|
return (void *)&gpanel;
|
|
|
|
err_release_fb_mem:
|
|
free(par->vram_virt);
|
|
|
|
err_release_fb:
|
|
free(da8xx_fb_info);
|
|
|
|
return NULL;
|
|
}
|
|
|
|
void video_set_lut(unsigned int index, /* color number */
|
|
unsigned char r, /* red */
|
|
unsigned char g, /* green */
|
|
unsigned char b /* blue */
|
|
)
|
|
{
|
|
|
|
return;
|
|
}
|
|
|
|
void da8xx_video_init(const struct da8xx_panel *panel,
|
|
const struct lcd_ctrl_config *lcd_cfg, int bits_pixel)
|
|
{
|
|
lcd_panel = panel;
|
|
da8xx_lcd_cfg = lcd_cfg;
|
|
bits_x_pixel = bits_pixel;
|
|
}
|
|
|