upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
460 lines
13 KiB
460 lines
13 KiB
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* MPC8560 FCC Fast Ethernet
|
|
* Copyright (c) 2003 Motorola,Inc.
|
|
* Xianghua Xiao, (X.Xiao@motorola.com)
|
|
*
|
|
* Copyright (c) 2000 MontaVista Software, Inc. Dan Malek (dmalek@jlc.net)
|
|
*
|
|
* (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
|
* Marius Groeger <mgroeger@sysgo.de>
|
|
*/
|
|
|
|
/*
|
|
* MPC8560 FCC Fast Ethernet
|
|
* Basic ET HW initialization and packet RX/TX routines
|
|
*
|
|
* This code will not perform the IO port configuration. This should be
|
|
* done in the iop_conf_t structure specific for the board.
|
|
*
|
|
* TODO:
|
|
* add a PHY driver to do the negotiation
|
|
* reflect negotiation results in FPSMR
|
|
* look for ways to configure the board specific stuff elsewhere, eg.
|
|
* config_xxx.h or the board directory
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <malloc.h>
|
|
#include <asm/cpm_85xx.h>
|
|
#include <command.h>
|
|
#include <config.h>
|
|
#include <net.h>
|
|
|
|
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
|
|
#include <miiphy.h>
|
|
#endif
|
|
|
|
#if defined(CONFIG_ETHER_ON_FCC) && defined(CONFIG_CMD_NET)
|
|
|
|
static struct ether_fcc_info_s
|
|
{
|
|
int ether_index;
|
|
int proff_enet;
|
|
ulong cpm_cr_enet_sblock;
|
|
ulong cpm_cr_enet_page;
|
|
ulong cmxfcr_mask;
|
|
ulong cmxfcr_value;
|
|
}
|
|
ether_fcc_info[] =
|
|
{
|
|
#ifdef CONFIG_ETHER_ON_FCC1
|
|
{
|
|
0,
|
|
PROFF_FCC1,
|
|
CPM_CR_FCC1_SBLOCK,
|
|
CPM_CR_FCC1_PAGE,
|
|
CONFIG_SYS_CMXFCR_MASK1,
|
|
CONFIG_SYS_CMXFCR_VALUE1
|
|
},
|
|
#endif
|
|
|
|
#ifdef CONFIG_ETHER_ON_FCC2
|
|
{
|
|
1,
|
|
PROFF_FCC2,
|
|
CPM_CR_FCC2_SBLOCK,
|
|
CPM_CR_FCC2_PAGE,
|
|
CONFIG_SYS_CMXFCR_MASK2,
|
|
CONFIG_SYS_CMXFCR_VALUE2
|
|
},
|
|
#endif
|
|
|
|
#ifdef CONFIG_ETHER_ON_FCC3
|
|
{
|
|
2,
|
|
PROFF_FCC3,
|
|
CPM_CR_FCC3_SBLOCK,
|
|
CPM_CR_FCC3_PAGE,
|
|
CONFIG_SYS_CMXFCR_MASK3,
|
|
CONFIG_SYS_CMXFCR_VALUE3
|
|
},
|
|
#endif
|
|
};
|
|
|
|
/*---------------------------------------------------------------------*/
|
|
|
|
/* Maximum input DMA size. Must be a should(?) be a multiple of 4. */
|
|
#define PKT_MAXDMA_SIZE 1520
|
|
|
|
/* The FCC stores dest/src/type, data, and checksum for receive packets. */
|
|
#define PKT_MAXBUF_SIZE 1518
|
|
#define PKT_MINBUF_SIZE 64
|
|
|
|
/* Maximum input buffer size. Must be a multiple of 32. */
|
|
#define PKT_MAXBLR_SIZE 1536
|
|
|
|
#define TOUT_LOOP 1000000
|
|
|
|
#define TX_BUF_CNT 2
|
|
|
|
static uint rxIdx; /* index of the current RX buffer */
|
|
static uint txIdx; /* index of the current TX buffer */
|
|
|
|
/*
|
|
* FCC Ethernet Tx and Rx buffer descriptors.
|
|
* Provide for Double Buffering
|
|
* Note: PKTBUFSRX is defined in net.h
|
|
*/
|
|
|
|
typedef volatile struct rtxbd {
|
|
cbd_t rxbd[PKTBUFSRX];
|
|
cbd_t txbd[TX_BUF_CNT];
|
|
} RTXBD;
|
|
|
|
/* Good news: the FCC supports external BDs! */
|
|
#ifdef __GNUC__
|
|
static RTXBD rtx __attribute__ ((aligned(8)));
|
|
#else
|
|
#error "rtx must be 64-bit aligned"
|
|
#endif
|
|
|
|
#undef ET_DEBUG
|
|
|
|
static int fec_send(struct eth_device *dev, void *packet, int length)
|
|
{
|
|
int i = 0;
|
|
int result = 0;
|
|
|
|
if (length <= 0) {
|
|
printf("fec: bad packet size: %d\n", length);
|
|
goto out;
|
|
}
|
|
|
|
for(i=0; rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
|
|
if (i >= TOUT_LOOP) {
|
|
printf("fec: tx buffer not ready\n");
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
rtx.txbd[txIdx].cbd_bufaddr = (uint)packet;
|
|
rtx.txbd[txIdx].cbd_datlen = length;
|
|
rtx.txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST | \
|
|
BD_ENET_TX_TC | BD_ENET_TX_PAD);
|
|
|
|
for(i=0; rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
|
|
if (i >= TOUT_LOOP) {
|
|
printf("fec: tx error\n");
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
#ifdef ET_DEBUG
|
|
printf("cycles: 0x%x txIdx=0x%04x status: 0x%04x\n", i, txIdx,rtx.txbd[txIdx].cbd_sc);
|
|
printf("packets at 0x%08x, length_in_bytes=0x%x\n",(uint)packet,length);
|
|
for(i=0;i<(length/16 + 1);i++) {
|
|
printf("%08x %08x %08x %08x\n",*((uint *)rtx.txbd[txIdx].cbd_bufaddr+i*4),\
|
|
*((uint *)rtx.txbd[txIdx].cbd_bufaddr + i*4 + 1),*((uint *)rtx.txbd[txIdx].cbd_bufaddr + i*4 + 2), \
|
|
*((uint *)rtx.txbd[txIdx].cbd_bufaddr + i*4 + 3));
|
|
}
|
|
#endif
|
|
|
|
/* return only status bits */
|
|
result = rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_STATS;
|
|
txIdx = (txIdx + 1) % TX_BUF_CNT;
|
|
|
|
out:
|
|
return result;
|
|
}
|
|
|
|
static int fec_recv(struct eth_device* dev)
|
|
{
|
|
int length;
|
|
|
|
for (;;)
|
|
{
|
|
if (rtx.rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
|
|
length = -1;
|
|
break; /* nothing received - leave for() loop */
|
|
}
|
|
length = rtx.rxbd[rxIdx].cbd_datlen;
|
|
|
|
if (rtx.rxbd[rxIdx].cbd_sc & 0x003f) {
|
|
printf("fec: rx error %04x\n", rtx.rxbd[rxIdx].cbd_sc);
|
|
}
|
|
else {
|
|
/* Pass the packet up to the protocol layers. */
|
|
net_process_received_packet(net_rx_packets[rxIdx], length - 4);
|
|
}
|
|
|
|
|
|
/* Give the buffer back to the FCC. */
|
|
rtx.rxbd[rxIdx].cbd_datlen = 0;
|
|
|
|
/* wrap around buffer index when necessary */
|
|
if ((rxIdx + 1) >= PKTBUFSRX) {
|
|
rtx.rxbd[PKTBUFSRX - 1].cbd_sc = (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
|
|
rxIdx = 0;
|
|
}
|
|
else {
|
|
rtx.rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
|
|
rxIdx++;
|
|
}
|
|
}
|
|
return length;
|
|
}
|
|
|
|
|
|
static int fec_init(struct eth_device* dev, bd_t *bis)
|
|
{
|
|
struct ether_fcc_info_s * info = dev->priv;
|
|
int i;
|
|
volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
|
|
volatile ccsr_cpm_cp_t *cp = &(cpm->im_cpm_cp);
|
|
fcc_enet_t *pram_ptr;
|
|
unsigned long mem_addr;
|
|
|
|
#if 0
|
|
mii_discover_phy();
|
|
#endif
|
|
|
|
/* 28.9 - (1-2): ioports have been set up already */
|
|
|
|
/* 28.9 - (3): connect FCC's tx and rx clocks */
|
|
cpm->im_cpm_mux.cmxuar = 0; /* ATM */
|
|
cpm->im_cpm_mux.cmxfcr = (cpm->im_cpm_mux.cmxfcr & ~info->cmxfcr_mask) |
|
|
info->cmxfcr_value;
|
|
|
|
/* 28.9 - (4): GFMR: disable tx/rx, CCITT CRC, set Mode Ethernet */
|
|
if(info->ether_index == 0) {
|
|
cpm->im_cpm_fcc1.gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
|
|
} else if (info->ether_index == 1) {
|
|
cpm->im_cpm_fcc2.gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
|
|
} else if (info->ether_index == 2) {
|
|
cpm->im_cpm_fcc3.gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
|
|
}
|
|
|
|
/* 28.9 - (5): FPSMR: enable full duplex, select CCITT CRC for Ethernet,MII */
|
|
if(info->ether_index == 0) {
|
|
cpm->im_cpm_fcc1.fpsmr = CONFIG_SYS_FCC_PSMR | FCC_PSMR_ENCRC;
|
|
} else if (info->ether_index == 1){
|
|
cpm->im_cpm_fcc2.fpsmr = CONFIG_SYS_FCC_PSMR | FCC_PSMR_ENCRC;
|
|
} else if (info->ether_index == 2){
|
|
cpm->im_cpm_fcc3.fpsmr = CONFIG_SYS_FCC_PSMR | FCC_PSMR_ENCRC;
|
|
}
|
|
|
|
/* 28.9 - (6): FDSR: Ethernet Syn */
|
|
if(info->ether_index == 0) {
|
|
cpm->im_cpm_fcc1.fdsr = 0xD555;
|
|
} else if (info->ether_index == 1) {
|
|
cpm->im_cpm_fcc2.fdsr = 0xD555;
|
|
} else if (info->ether_index == 2) {
|
|
cpm->im_cpm_fcc3.fdsr = 0xD555;
|
|
}
|
|
|
|
/* reset indeces to current rx/tx bd (see eth_send()/eth_rx()) */
|
|
rxIdx = 0;
|
|
txIdx = 0;
|
|
|
|
/* Setup Receiver Buffer Descriptors */
|
|
for (i = 0; i < PKTBUFSRX; i++)
|
|
{
|
|
rtx.rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
|
|
rtx.rxbd[i].cbd_datlen = 0;
|
|
rtx.rxbd[i].cbd_bufaddr = (uint)net_rx_packets[i];
|
|
}
|
|
rtx.rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
|
|
|
|
/* Setup Ethernet Transmitter Buffer Descriptors */
|
|
for (i = 0; i < TX_BUF_CNT; i++)
|
|
{
|
|
rtx.txbd[i].cbd_sc = 0;
|
|
rtx.txbd[i].cbd_datlen = 0;
|
|
rtx.txbd[i].cbd_bufaddr = 0;
|
|
}
|
|
rtx.txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
|
|
|
|
/* 28.9 - (7): initialize parameter ram */
|
|
pram_ptr = (fcc_enet_t *)&(cpm->im_dprambase[info->proff_enet]);
|
|
|
|
/* clear whole structure to make sure all reserved fields are zero */
|
|
memset((void*)pram_ptr, 0, sizeof(fcc_enet_t));
|
|
|
|
/*
|
|
* common Parameter RAM area
|
|
*
|
|
* Allocate space in the reserved FCC area of DPRAM for the
|
|
* internal buffers. No one uses this space (yet), so we
|
|
* can do this. Later, we will add resource management for
|
|
* this area.
|
|
* CPM_FCC_SPECIAL_BASE: 0xB000 for MPC8540, MPC8560
|
|
* 0x9000 for MPC8541, MPC8555
|
|
*/
|
|
mem_addr = CPM_FCC_SPECIAL_BASE + ((info->ether_index) * 64);
|
|
pram_ptr->fen_genfcc.fcc_riptr = mem_addr;
|
|
pram_ptr->fen_genfcc.fcc_tiptr = mem_addr+32;
|
|
/*
|
|
* Set maximum bytes per receive buffer.
|
|
* It must be a multiple of 32.
|
|
*/
|
|
pram_ptr->fen_genfcc.fcc_mrblr = PKT_MAXBLR_SIZE; /* 1536 */
|
|
/* localbus SDRAM should be preferred */
|
|
pram_ptr->fen_genfcc.fcc_rstate = (CPMFCR_GBL | CPMFCR_EB |
|
|
CONFIG_SYS_CPMFCR_RAMTYPE) << 24;
|
|
pram_ptr->fen_genfcc.fcc_rbase = (unsigned int)(&rtx.rxbd[rxIdx]);
|
|
pram_ptr->fen_genfcc.fcc_rbdstat = 0;
|
|
pram_ptr->fen_genfcc.fcc_rbdlen = 0;
|
|
pram_ptr->fen_genfcc.fcc_rdptr = 0;
|
|
/* localbus SDRAM should be preferred */
|
|
pram_ptr->fen_genfcc.fcc_tstate = (CPMFCR_GBL | CPMFCR_EB |
|
|
CONFIG_SYS_CPMFCR_RAMTYPE) << 24;
|
|
pram_ptr->fen_genfcc.fcc_tbase = (unsigned int)(&rtx.txbd[txIdx]);
|
|
pram_ptr->fen_genfcc.fcc_tbdstat = 0;
|
|
pram_ptr->fen_genfcc.fcc_tbdlen = 0;
|
|
pram_ptr->fen_genfcc.fcc_tdptr = 0;
|
|
|
|
/* protocol-specific area */
|
|
pram_ptr->fen_statbuf = 0x0;
|
|
pram_ptr->fen_cmask = 0xdebb20e3; /* CRC mask */
|
|
pram_ptr->fen_cpres = 0xffffffff; /* CRC preset */
|
|
pram_ptr->fen_crcec = 0;
|
|
pram_ptr->fen_alec = 0;
|
|
pram_ptr->fen_disfc = 0;
|
|
pram_ptr->fen_retlim = 15; /* Retry limit threshold */
|
|
pram_ptr->fen_retcnt = 0;
|
|
pram_ptr->fen_pper = 0;
|
|
pram_ptr->fen_boffcnt = 0;
|
|
pram_ptr->fen_gaddrh = 0;
|
|
pram_ptr->fen_gaddrl = 0;
|
|
pram_ptr->fen_mflr = PKT_MAXBUF_SIZE; /* maximum frame length register */
|
|
/*
|
|
* Set Ethernet station address.
|
|
*
|
|
* This is supplied in the board information structure, so we
|
|
* copy that into the controller.
|
|
* So far we have only been given one Ethernet address. We make
|
|
* it unique by setting a few bits in the upper byte of the
|
|
* non-static part of the address.
|
|
*/
|
|
#define ea eth_get_ethaddr()
|
|
pram_ptr->fen_paddrh = (ea[5] << 8) + ea[4];
|
|
pram_ptr->fen_paddrm = (ea[3] << 8) + ea[2];
|
|
pram_ptr->fen_paddrl = (ea[1] << 8) + ea[0];
|
|
#undef ea
|
|
pram_ptr->fen_ibdcount = 0;
|
|
pram_ptr->fen_ibdstart = 0;
|
|
pram_ptr->fen_ibdend = 0;
|
|
pram_ptr->fen_txlen = 0;
|
|
pram_ptr->fen_iaddrh = 0; /* disable hash */
|
|
pram_ptr->fen_iaddrl = 0;
|
|
pram_ptr->fen_minflr = PKT_MINBUF_SIZE; /* minimum frame length register: 64 */
|
|
/* pad pointer. use tiptr since we don't need a specific padding char */
|
|
pram_ptr->fen_padptr = pram_ptr->fen_genfcc.fcc_tiptr;
|
|
pram_ptr->fen_maxd1 = PKT_MAXDMA_SIZE; /* maximum DMA1 length:1520 */
|
|
pram_ptr->fen_maxd2 = PKT_MAXDMA_SIZE; /* maximum DMA2 length:1520 */
|
|
|
|
#if defined(ET_DEBUG)
|
|
printf("parm_ptr(0xff788500) = %p\n",pram_ptr);
|
|
printf("pram_ptr->fen_genfcc.fcc_rbase %08x\n",
|
|
pram_ptr->fen_genfcc.fcc_rbase);
|
|
printf("pram_ptr->fen_genfcc.fcc_tbase %08x\n",
|
|
pram_ptr->fen_genfcc.fcc_tbase);
|
|
#endif
|
|
|
|
/* 28.9 - (8)(9): clear out events in FCCE */
|
|
/* 28.9 - (9): FCCM: mask all events */
|
|
if(info->ether_index == 0) {
|
|
cpm->im_cpm_fcc1.fcce = ~0x0;
|
|
cpm->im_cpm_fcc1.fccm = 0;
|
|
} else if (info->ether_index == 1) {
|
|
cpm->im_cpm_fcc2.fcce = ~0x0;
|
|
cpm->im_cpm_fcc2.fccm = 0;
|
|
} else if (info->ether_index == 2) {
|
|
cpm->im_cpm_fcc3.fcce = ~0x0;
|
|
cpm->im_cpm_fcc3.fccm = 0;
|
|
}
|
|
|
|
/* 28.9 - (10-12): we don't use ethernet interrupts */
|
|
|
|
/* 28.9 - (13)
|
|
*
|
|
* Let's re-initialize the channel now. We have to do it later
|
|
* than the manual describes because we have just now finished
|
|
* the BD initialization.
|
|
*/
|
|
cp->cpcr = mk_cr_cmd(info->cpm_cr_enet_page,
|
|
info->cpm_cr_enet_sblock,
|
|
0x0c,
|
|
CPM_CR_INIT_TRX) | CPM_CR_FLG;
|
|
do {
|
|
__asm__ __volatile__ ("eieio");
|
|
} while (cp->cpcr & CPM_CR_FLG);
|
|
|
|
/* 28.9 - (14): enable tx/rx in gfmr */
|
|
if(info->ether_index == 0) {
|
|
cpm->im_cpm_fcc1.gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
|
|
} else if (info->ether_index == 1) {
|
|
cpm->im_cpm_fcc2.gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
|
|
} else if (info->ether_index == 2) {
|
|
cpm->im_cpm_fcc3.gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static void fec_halt(struct eth_device* dev)
|
|
{
|
|
struct ether_fcc_info_s * info = dev->priv;
|
|
volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
|
|
|
|
/* write GFMR: disable tx/rx */
|
|
if(info->ether_index == 0) {
|
|
cpm->im_cpm_fcc1.gfmr &= ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
|
|
} else if(info->ether_index == 1) {
|
|
cpm->im_cpm_fcc2.gfmr &= ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
|
|
} else if(info->ether_index == 2) {
|
|
cpm->im_cpm_fcc3.gfmr &= ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
|
|
}
|
|
}
|
|
|
|
int fec_initialize(bd_t *bis)
|
|
{
|
|
struct eth_device* dev;
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ether_fcc_info); i++)
|
|
{
|
|
dev = (struct eth_device*) malloc(sizeof *dev);
|
|
memset(dev, 0, sizeof *dev);
|
|
|
|
sprintf(dev->name, "FCC%d",
|
|
ether_fcc_info[i].ether_index + 1);
|
|
dev->priv = ðer_fcc_info[i];
|
|
dev->init = fec_init;
|
|
dev->halt = fec_halt;
|
|
dev->send = fec_send;
|
|
dev->recv = fec_recv;
|
|
|
|
eth_register(dev);
|
|
|
|
#if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) \
|
|
&& defined(CONFIG_BITBANGMII)
|
|
int retval;
|
|
struct mii_dev *mdiodev = mdio_alloc();
|
|
if (!mdiodev)
|
|
return -ENOMEM;
|
|
strncpy(mdiodev->name, dev->name, MDIO_NAME_LEN);
|
|
mdiodev->read = bb_miiphy_read;
|
|
mdiodev->write = bb_miiphy_write;
|
|
|
|
retval = mdio_register(mdiodev);
|
|
if (retval < 0)
|
|
return retval;
|
|
#endif
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
#endif
|
|
|