upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
853 lines
22 KiB
853 lines
22 KiB
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2007-2011 Freescale Semiconductor, Inc.
|
|
*
|
|
* (C) Copyright 2000
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <environment.h>
|
|
#include <linux/libfdt.h>
|
|
#include <fdt_support.h>
|
|
#include <asm/processor.h>
|
|
#include <linux/ctype.h>
|
|
#include <asm/io.h>
|
|
#include <asm/fsl_fdt.h>
|
|
#include <asm/fsl_portals.h>
|
|
#include <fsl_qbman.h>
|
|
#include <hwconfig.h>
|
|
#ifdef CONFIG_FSL_ESDHC
|
|
#include <fsl_esdhc.h>
|
|
#endif
|
|
#ifdef CONFIG_SYS_DPAA_FMAN
|
|
#include <fsl_fman.h>
|
|
#endif
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
extern void ft_qe_setup(void *blob);
|
|
extern void ft_fixup_num_cores(void *blob);
|
|
extern void ft_srio_setup(void *blob);
|
|
|
|
#ifdef CONFIG_MP
|
|
#include "mp.h"
|
|
|
|
void ft_fixup_cpu(void *blob, u64 memory_limit)
|
|
{
|
|
int off;
|
|
phys_addr_t spin_tbl_addr = get_spin_phys_addr();
|
|
u32 bootpg = determine_mp_bootpg(NULL);
|
|
u32 id = get_my_id();
|
|
const char *enable_method;
|
|
#if defined(T1040_TDM_QUIRK_CCSR_BASE)
|
|
int ret;
|
|
int tdm_hwconfig_enabled = 0;
|
|
char buffer[HWCONFIG_BUFFER_SIZE] = {0};
|
|
#endif
|
|
|
|
off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
|
|
while (off != -FDT_ERR_NOTFOUND) {
|
|
u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
|
|
|
|
if (reg) {
|
|
u32 phys_cpu_id = thread_to_core(*reg);
|
|
u64 val = phys_cpu_id * SIZE_BOOT_ENTRY + spin_tbl_addr;
|
|
val = cpu_to_fdt64(val);
|
|
if (*reg == id) {
|
|
fdt_setprop_string(blob, off, "status",
|
|
"okay");
|
|
} else {
|
|
fdt_setprop_string(blob, off, "status",
|
|
"disabled");
|
|
}
|
|
|
|
if (hold_cores_in_reset(0)) {
|
|
#ifdef CONFIG_FSL_CORENET
|
|
/* Cores held in reset, use BRR to release */
|
|
enable_method = "fsl,brr-holdoff";
|
|
#else
|
|
/* Cores held in reset, use EEBPCR to release */
|
|
enable_method = "fsl,eebpcr-holdoff";
|
|
#endif
|
|
} else {
|
|
/* Cores out of reset and in a spin-loop */
|
|
enable_method = "spin-table";
|
|
|
|
fdt_setprop(blob, off, "cpu-release-addr",
|
|
&val, sizeof(val));
|
|
}
|
|
|
|
fdt_setprop_string(blob, off, "enable-method",
|
|
enable_method);
|
|
} else {
|
|
printf ("cpu NULL\n");
|
|
}
|
|
off = fdt_node_offset_by_prop_value(blob, off,
|
|
"device_type", "cpu", 4);
|
|
}
|
|
|
|
#if defined(T1040_TDM_QUIRK_CCSR_BASE)
|
|
#define CONFIG_MEM_HOLE_16M 0x1000000
|
|
/*
|
|
* Extract hwconfig from environment.
|
|
* Search for tdm entry in hwconfig.
|
|
*/
|
|
ret = env_get_f("hwconfig", buffer, sizeof(buffer));
|
|
if (ret > 0)
|
|
tdm_hwconfig_enabled = hwconfig_f("tdm", buffer);
|
|
|
|
/* Reserve the memory hole created by TDM LAW, so OSes dont use it */
|
|
if (tdm_hwconfig_enabled) {
|
|
off = fdt_add_mem_rsv(blob, T1040_TDM_QUIRK_CCSR_BASE,
|
|
CONFIG_MEM_HOLE_16M);
|
|
if (off < 0)
|
|
printf("Failed to reserve memory for tdm: %s\n",
|
|
fdt_strerror(off));
|
|
}
|
|
#endif
|
|
|
|
/* Reserve the boot page so OSes dont use it */
|
|
if ((u64)bootpg < memory_limit) {
|
|
off = fdt_add_mem_rsv(blob, bootpg, (u64)4096);
|
|
if (off < 0)
|
|
printf("Failed to reserve memory for bootpg: %s\n",
|
|
fdt_strerror(off));
|
|
}
|
|
|
|
#ifndef CONFIG_MPC8xxx_DISABLE_BPTR
|
|
/*
|
|
* Reserve the default boot page so OSes dont use it.
|
|
* The default boot page is always mapped to bootpg above using
|
|
* boot page translation.
|
|
*/
|
|
if (0xfffff000ull < memory_limit) {
|
|
off = fdt_add_mem_rsv(blob, 0xfffff000ull, (u64)4096);
|
|
if (off < 0) {
|
|
printf("Failed to reserve memory for 0xfffff000: %s\n",
|
|
fdt_strerror(off));
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/* Reserve spin table page */
|
|
if (spin_tbl_addr < memory_limit) {
|
|
off = fdt_add_mem_rsv(blob,
|
|
(spin_tbl_addr & ~0xffful), 4096);
|
|
if (off < 0)
|
|
printf("Failed to reserve memory for spin table: %s\n",
|
|
fdt_strerror(off));
|
|
}
|
|
#ifdef CONFIG_DEEP_SLEEP
|
|
#ifdef CONFIG_SPL_MMC_BOOT
|
|
off = fdt_add_mem_rsv(blob, CONFIG_SYS_MMC_U_BOOT_START,
|
|
CONFIG_SYS_MMC_U_BOOT_SIZE);
|
|
if (off < 0)
|
|
printf("Failed to reserve memory for SD deep sleep: %s\n",
|
|
fdt_strerror(off));
|
|
#elif defined(CONFIG_SPL_SPI_BOOT)
|
|
off = fdt_add_mem_rsv(blob, CONFIG_SYS_SPI_FLASH_U_BOOT_START,
|
|
CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE);
|
|
if (off < 0)
|
|
printf("Failed to reserve memory for SPI deep sleep: %s\n",
|
|
fdt_strerror(off));
|
|
#endif
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_FSL_CPC
|
|
static inline void ft_fixup_l3cache(void *blob, int off)
|
|
{
|
|
u32 line_size, num_ways, size, num_sets;
|
|
cpc_corenet_t *cpc = (void *)CONFIG_SYS_FSL_CPC_ADDR;
|
|
u32 cfg0 = in_be32(&cpc->cpccfg0);
|
|
|
|
size = CPC_CFG0_SZ_K(cfg0) * 1024 * CONFIG_SYS_NUM_CPC;
|
|
num_ways = CPC_CFG0_NUM_WAYS(cfg0);
|
|
line_size = CPC_CFG0_LINE_SZ(cfg0);
|
|
num_sets = size / (line_size * num_ways);
|
|
|
|
fdt_setprop(blob, off, "cache-unified", NULL, 0);
|
|
fdt_setprop_cell(blob, off, "cache-block-size", line_size);
|
|
fdt_setprop_cell(blob, off, "cache-size", size);
|
|
fdt_setprop_cell(blob, off, "cache-sets", num_sets);
|
|
fdt_setprop_cell(blob, off, "cache-level", 3);
|
|
#ifdef CONFIG_SYS_CACHE_STASHING
|
|
fdt_setprop_cell(blob, off, "cache-stash-id", 1);
|
|
#endif
|
|
}
|
|
#else
|
|
#define ft_fixup_l3cache(x, y)
|
|
#endif
|
|
|
|
#if defined(CONFIG_L2_CACHE) || \
|
|
defined(CONFIG_BACKSIDE_L2_CACHE) || \
|
|
defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
|
|
static inline void ft_fixup_l2cache_compatible(void *blob, int off)
|
|
{
|
|
int len;
|
|
struct cpu_type *cpu = identify_cpu(SVR_SOC_VER(get_svr()));
|
|
|
|
if (cpu) {
|
|
char buf[40];
|
|
|
|
if (isdigit(cpu->name[0])) {
|
|
/* MPCxxxx, where xxxx == 4-digit number */
|
|
len = sprintf(buf, "fsl,mpc%s-l2-cache-controller",
|
|
cpu->name) + 1;
|
|
} else {
|
|
/* Pxxxx or Txxxx, where xxxx == 4-digit number */
|
|
len = sprintf(buf, "fsl,%c%s-l2-cache-controller",
|
|
tolower(cpu->name[0]), cpu->name + 1) + 1;
|
|
}
|
|
|
|
/*
|
|
* append "cache" after the NULL character that the previous
|
|
* sprintf wrote. This is how a device tree stores multiple
|
|
* strings in a property.
|
|
*/
|
|
len += sprintf(buf + len, "cache") + 1;
|
|
|
|
fdt_setprop(blob, off, "compatible", buf, len);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_L2_CACHE)
|
|
/* return size in kilobytes */
|
|
static inline u32 l2cache_size(void)
|
|
{
|
|
volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
|
|
volatile u32 l2siz_field = (l2cache->l2ctl >> 28) & 0x3;
|
|
u32 ver = SVR_SOC_VER(get_svr());
|
|
|
|
switch (l2siz_field) {
|
|
case 0x0:
|
|
break;
|
|
case 0x1:
|
|
if (ver == SVR_8540 || ver == SVR_8560 ||
|
|
ver == SVR_8541 || ver == SVR_8555)
|
|
return 128;
|
|
else
|
|
return 256;
|
|
break;
|
|
case 0x2:
|
|
if (ver == SVR_8540 || ver == SVR_8560 ||
|
|
ver == SVR_8541 || ver == SVR_8555)
|
|
return 256;
|
|
else
|
|
return 512;
|
|
break;
|
|
case 0x3:
|
|
return 1024;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline void ft_fixup_l2cache(void *blob)
|
|
{
|
|
int off;
|
|
u32 *ph;
|
|
|
|
const u32 line_size = 32;
|
|
const u32 num_ways = 8;
|
|
const u32 size = l2cache_size() * 1024;
|
|
const u32 num_sets = size / (line_size * num_ways);
|
|
|
|
off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
|
|
if (off < 0) {
|
|
debug("no cpu node fount\n");
|
|
return;
|
|
}
|
|
|
|
ph = (u32 *)fdt_getprop(blob, off, "next-level-cache", 0);
|
|
|
|
if (ph == NULL) {
|
|
debug("no next-level-cache property\n");
|
|
return ;
|
|
}
|
|
|
|
off = fdt_node_offset_by_phandle(blob, *ph);
|
|
if (off < 0) {
|
|
printf("%s: %s\n", __func__, fdt_strerror(off));
|
|
return ;
|
|
}
|
|
|
|
ft_fixup_l2cache_compatible(blob, off);
|
|
fdt_setprop(blob, off, "cache-unified", NULL, 0);
|
|
fdt_setprop_cell(blob, off, "cache-block-size", line_size);
|
|
fdt_setprop_cell(blob, off, "cache-size", size);
|
|
fdt_setprop_cell(blob, off, "cache-sets", num_sets);
|
|
fdt_setprop_cell(blob, off, "cache-level", 2);
|
|
|
|
/* we dont bother w/L3 since no platform of this type has one */
|
|
}
|
|
#elif defined(CONFIG_BACKSIDE_L2_CACHE) || \
|
|
defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
|
|
static inline void ft_fixup_l2cache(void *blob)
|
|
{
|
|
int off, l2_off, l3_off = -1;
|
|
u32 *ph;
|
|
#ifdef CONFIG_BACKSIDE_L2_CACHE
|
|
u32 l2cfg0 = mfspr(SPRN_L2CFG0);
|
|
#else
|
|
struct ccsr_cluster_l2 *l2cache =
|
|
(struct ccsr_cluster_l2 __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2);
|
|
u32 l2cfg0 = in_be32(&l2cache->l2cfg0);
|
|
#endif
|
|
u32 size, line_size, num_ways, num_sets;
|
|
int has_l2 = 1;
|
|
|
|
/* P2040/P2040E has no L2, so dont set any L2 props */
|
|
if (SVR_SOC_VER(get_svr()) == SVR_P2040)
|
|
has_l2 = 0;
|
|
|
|
size = (l2cfg0 & 0x3fff) * 64 * 1024;
|
|
num_ways = ((l2cfg0 >> 14) & 0x1f) + 1;
|
|
line_size = (((l2cfg0 >> 23) & 0x3) + 1) * 32;
|
|
num_sets = size / (line_size * num_ways);
|
|
|
|
off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
|
|
|
|
while (off != -FDT_ERR_NOTFOUND) {
|
|
ph = (u32 *)fdt_getprop(blob, off, "next-level-cache", 0);
|
|
|
|
if (ph == NULL) {
|
|
debug("no next-level-cache property\n");
|
|
goto next;
|
|
}
|
|
|
|
l2_off = fdt_node_offset_by_phandle(blob, *ph);
|
|
if (l2_off < 0) {
|
|
printf("%s: %s\n", __func__, fdt_strerror(off));
|
|
goto next;
|
|
}
|
|
|
|
if (has_l2) {
|
|
#ifdef CONFIG_SYS_CACHE_STASHING
|
|
u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
|
|
#if defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
|
|
/* Only initialize every eighth thread */
|
|
if (reg && !((*reg) % 8)) {
|
|
fdt_setprop_cell(blob, l2_off, "cache-stash-id",
|
|
(*reg / 4) + 32 + 1);
|
|
}
|
|
#else
|
|
if (reg) {
|
|
fdt_setprop_cell(blob, l2_off, "cache-stash-id",
|
|
(*reg * 2) + 32 + 1);
|
|
}
|
|
#endif
|
|
#endif
|
|
|
|
fdt_setprop(blob, l2_off, "cache-unified", NULL, 0);
|
|
fdt_setprop_cell(blob, l2_off, "cache-block-size",
|
|
line_size);
|
|
fdt_setprop_cell(blob, l2_off, "cache-size", size);
|
|
fdt_setprop_cell(blob, l2_off, "cache-sets", num_sets);
|
|
fdt_setprop_cell(blob, l2_off, "cache-level", 2);
|
|
ft_fixup_l2cache_compatible(blob, l2_off);
|
|
}
|
|
|
|
if (l3_off < 0) {
|
|
ph = (u32 *)fdt_getprop(blob, l2_off, "next-level-cache", 0);
|
|
|
|
if (ph == NULL) {
|
|
debug("no next-level-cache property\n");
|
|
goto next;
|
|
}
|
|
l3_off = *ph;
|
|
}
|
|
next:
|
|
off = fdt_node_offset_by_prop_value(blob, off,
|
|
"device_type", "cpu", 4);
|
|
}
|
|
if (l3_off > 0) {
|
|
l3_off = fdt_node_offset_by_phandle(blob, l3_off);
|
|
if (l3_off < 0) {
|
|
printf("%s: %s\n", __func__, fdt_strerror(off));
|
|
return ;
|
|
}
|
|
ft_fixup_l3cache(blob, l3_off);
|
|
}
|
|
}
|
|
#else
|
|
#define ft_fixup_l2cache(x)
|
|
#endif
|
|
|
|
static inline void ft_fixup_cache(void *blob)
|
|
{
|
|
int off;
|
|
|
|
off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
|
|
|
|
while (off != -FDT_ERR_NOTFOUND) {
|
|
u32 l1cfg0 = mfspr(SPRN_L1CFG0);
|
|
u32 l1cfg1 = mfspr(SPRN_L1CFG1);
|
|
u32 isize, iline_size, inum_sets, inum_ways;
|
|
u32 dsize, dline_size, dnum_sets, dnum_ways;
|
|
|
|
/* d-side config */
|
|
dsize = (l1cfg0 & 0x7ff) * 1024;
|
|
dnum_ways = ((l1cfg0 >> 11) & 0xff) + 1;
|
|
dline_size = (((l1cfg0 >> 23) & 0x3) + 1) * 32;
|
|
dnum_sets = dsize / (dline_size * dnum_ways);
|
|
|
|
fdt_setprop_cell(blob, off, "d-cache-block-size", dline_size);
|
|
fdt_setprop_cell(blob, off, "d-cache-size", dsize);
|
|
fdt_setprop_cell(blob, off, "d-cache-sets", dnum_sets);
|
|
|
|
#ifdef CONFIG_SYS_CACHE_STASHING
|
|
{
|
|
u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
|
|
if (reg)
|
|
fdt_setprop_cell(blob, off, "cache-stash-id",
|
|
(*reg * 2) + 32 + 0);
|
|
}
|
|
#endif
|
|
|
|
/* i-side config */
|
|
isize = (l1cfg1 & 0x7ff) * 1024;
|
|
inum_ways = ((l1cfg1 >> 11) & 0xff) + 1;
|
|
iline_size = (((l1cfg1 >> 23) & 0x3) + 1) * 32;
|
|
inum_sets = isize / (iline_size * inum_ways);
|
|
|
|
fdt_setprop_cell(blob, off, "i-cache-block-size", iline_size);
|
|
fdt_setprop_cell(blob, off, "i-cache-size", isize);
|
|
fdt_setprop_cell(blob, off, "i-cache-sets", inum_sets);
|
|
|
|
off = fdt_node_offset_by_prop_value(blob, off,
|
|
"device_type", "cpu", 4);
|
|
}
|
|
|
|
ft_fixup_l2cache(blob);
|
|
}
|
|
|
|
|
|
void fdt_add_enet_stashing(void *fdt)
|
|
{
|
|
do_fixup_by_compat(fdt, "gianfar", "bd-stash", NULL, 0, 1);
|
|
|
|
do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-len", 96, 1);
|
|
|
|
do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-idx", 0, 1);
|
|
do_fixup_by_compat(fdt, "fsl,etsec2", "bd-stash", NULL, 0, 1);
|
|
do_fixup_by_compat_u32(fdt, "fsl,etsec2", "rx-stash-len", 96, 1);
|
|
do_fixup_by_compat_u32(fdt, "fsl,etsec2", "rx-stash-idx", 0, 1);
|
|
}
|
|
|
|
#if defined(CONFIG_SYS_DPAA_FMAN) || defined(CONFIG_SYS_DPAA_PME)
|
|
#ifdef CONFIG_SYS_DPAA_FMAN
|
|
static void ft_fixup_clks(void *blob, const char *compat, u32 offset,
|
|
unsigned long freq)
|
|
{
|
|
phys_addr_t phys = offset + CONFIG_SYS_CCSRBAR_PHYS;
|
|
int off = fdt_node_offset_by_compat_reg(blob, compat, phys);
|
|
|
|
if (off >= 0) {
|
|
off = fdt_setprop_cell(blob, off, "clock-frequency", freq);
|
|
if (off > 0)
|
|
printf("WARNING enable to set clock-frequency "
|
|
"for %s: %s\n", compat, fdt_strerror(off));
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static void ft_fixup_dpaa_clks(void *blob)
|
|
{
|
|
sys_info_t sysinfo;
|
|
|
|
get_sys_info(&sysinfo);
|
|
#ifdef CONFIG_SYS_DPAA_FMAN
|
|
ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM1_OFFSET,
|
|
sysinfo.freq_fman[0]);
|
|
|
|
#if (CONFIG_SYS_NUM_FMAN == 2)
|
|
ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM2_OFFSET,
|
|
sysinfo.freq_fman[1]);
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_DPAA_QBMAN
|
|
do_fixup_by_compat_u32(blob, "fsl,qman",
|
|
"clock-frequency", sysinfo.freq_qman, 1);
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_DPAA_PME
|
|
do_fixup_by_compat_u32(blob, "fsl,pme",
|
|
"clock-frequency", sysinfo.freq_pme, 1);
|
|
#endif
|
|
}
|
|
#else
|
|
#define ft_fixup_dpaa_clks(x)
|
|
#endif
|
|
|
|
#ifdef CONFIG_QE
|
|
static void ft_fixup_qe_snum(void *blob)
|
|
{
|
|
unsigned int svr;
|
|
|
|
svr = mfspr(SPRN_SVR);
|
|
if (SVR_SOC_VER(svr) == SVR_8569) {
|
|
if(IS_SVR_REV(svr, 1, 0))
|
|
do_fixup_by_compat_u32(blob, "fsl,qe",
|
|
"fsl,qe-num-snums", 46, 1);
|
|
else
|
|
do_fixup_by_compat_u32(blob, "fsl,qe",
|
|
"fsl,qe-num-snums", 76, 1);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_ARCH_P4080)
|
|
static void fdt_fixup_usb(void *fdt)
|
|
{
|
|
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
u32 rcwsr11 = in_be32(&gur->rcwsr[11]);
|
|
int off;
|
|
|
|
off = fdt_node_offset_by_compatible(fdt, -1, "fsl,mpc85xx-usb2-mph");
|
|
if ((rcwsr11 & FSL_CORENET_RCWSR11_EC1) !=
|
|
FSL_CORENET_RCWSR11_EC1_FM1_USB1)
|
|
fdt_status_disabled(fdt, off);
|
|
|
|
off = fdt_node_offset_by_compatible(fdt, -1, "fsl,mpc85xx-usb2-dr");
|
|
if ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) !=
|
|
FSL_CORENET_RCWSR11_EC2_USB2)
|
|
fdt_status_disabled(fdt, off);
|
|
}
|
|
#else
|
|
#define fdt_fixup_usb(x)
|
|
#endif
|
|
|
|
#if defined(CONFIG_ARCH_T2080) || defined(CONFIG_ARCH_T4240) || \
|
|
defined(CONFIG_ARCH_T4160)
|
|
void fdt_fixup_dma3(void *blob)
|
|
{
|
|
/* the 3rd DMA is not functional if SRIO2 is chosen */
|
|
int nodeoff;
|
|
ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
|
|
#define CONFIG_SYS_ELO3_DMA3 (0xffe000000 + 0x102300)
|
|
#if defined(CONFIG_ARCH_T2080)
|
|
u32 srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) &
|
|
FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
|
|
srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
|
|
|
|
switch (srds_prtcl_s2) {
|
|
case 0x29:
|
|
case 0x2d:
|
|
case 0x2e:
|
|
#elif defined(CONFIG_ARCH_T4240) || defined(CONFIG_ARCH_T4160)
|
|
u32 srds_prtcl_s4 = in_be32(&gur->rcwsr[4]) &
|
|
FSL_CORENET2_RCWSR4_SRDS4_PRTCL;
|
|
srds_prtcl_s4 >>= FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT;
|
|
|
|
switch (srds_prtcl_s4) {
|
|
case 6:
|
|
case 8:
|
|
case 14:
|
|
case 16:
|
|
#endif
|
|
nodeoff = fdt_node_offset_by_compat_reg(blob, "fsl,elo3-dma",
|
|
CONFIG_SYS_ELO3_DMA3);
|
|
if (nodeoff > 0)
|
|
fdt_status_disabled(blob, nodeoff);
|
|
else
|
|
printf("WARNING: unable to disable dma3\n");
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
#else
|
|
#define fdt_fixup_dma3(x)
|
|
#endif
|
|
|
|
#if defined(CONFIG_ARCH_T1040)
|
|
static void fdt_fixup_l2_switch(void *blob)
|
|
{
|
|
uchar l2swaddr[6];
|
|
int node;
|
|
|
|
/* The l2switch node from device-tree has
|
|
* compatible string "vitesse-9953" */
|
|
node = fdt_node_offset_by_compatible(blob, -1, "vitesse-9953");
|
|
if (node == -FDT_ERR_NOTFOUND)
|
|
/* no l2switch node has been found */
|
|
return;
|
|
|
|
/* Get MAC address for the l2switch from "l2switchaddr"*/
|
|
if (!eth_env_get_enetaddr("l2switchaddr", l2swaddr)) {
|
|
printf("Warning: MAC address for l2switch not found\n");
|
|
memset(l2swaddr, 0, sizeof(l2swaddr));
|
|
}
|
|
|
|
/* Add MAC address to l2switch node */
|
|
fdt_setprop(blob, node, "local-mac-address", l2swaddr,
|
|
sizeof(l2swaddr));
|
|
}
|
|
#else
|
|
#define fdt_fixup_l2_switch(x)
|
|
#endif
|
|
|
|
void ft_cpu_setup(void *blob, bd_t *bd)
|
|
{
|
|
int off;
|
|
int val;
|
|
int len;
|
|
sys_info_t sysinfo;
|
|
|
|
/* delete crypto node if not on an E-processor */
|
|
if (!IS_E_PROCESSOR(get_svr()))
|
|
fdt_fixup_crypto_node(blob, 0);
|
|
#if CONFIG_SYS_FSL_SEC_COMPAT >= 4
|
|
else {
|
|
ccsr_sec_t __iomem *sec;
|
|
|
|
sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
|
|
fdt_fixup_crypto_node(blob, sec_in32(&sec->secvid_ms));
|
|
}
|
|
#endif
|
|
|
|
fdt_add_enet_stashing(blob);
|
|
|
|
#ifndef CONFIG_FSL_TBCLK_EXTRA_DIV
|
|
#define CONFIG_FSL_TBCLK_EXTRA_DIV 1
|
|
#endif
|
|
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
|
|
"timebase-frequency", get_tbclk() / CONFIG_FSL_TBCLK_EXTRA_DIV,
|
|
1);
|
|
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
|
|
"bus-frequency", bd->bi_busfreq, 1);
|
|
get_sys_info(&sysinfo);
|
|
off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
|
|
while (off != -FDT_ERR_NOTFOUND) {
|
|
u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", &len);
|
|
val = cpu_to_fdt32(sysinfo.freq_processor[(*reg) / (len / 4)]);
|
|
fdt_setprop(blob, off, "clock-frequency", &val, 4);
|
|
off = fdt_node_offset_by_prop_value(blob, off, "device_type",
|
|
"cpu", 4);
|
|
}
|
|
do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
|
|
"bus-frequency", bd->bi_busfreq, 1);
|
|
|
|
#ifdef CONFIG_QE
|
|
ft_qe_setup(blob);
|
|
ft_fixup_qe_snum(blob);
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_DPAA_FMAN
|
|
fdt_fixup_fman_firmware(blob);
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_NS16550
|
|
do_fixup_by_compat_u32(blob, "ns16550",
|
|
"clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
|
|
#endif
|
|
|
|
#ifdef CONFIG_CPM2
|
|
do_fixup_by_compat_u32(blob, "fsl,cpm2-scc-uart",
|
|
"current-speed", gd->baudrate, 1);
|
|
|
|
do_fixup_by_compat_u32(blob, "fsl,cpm2-brg",
|
|
"clock-frequency", bd->bi_brgfreq, 1);
|
|
#endif
|
|
|
|
#ifdef CONFIG_FSL_CORENET
|
|
do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-1.0",
|
|
"clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
|
|
do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-2.0",
|
|
"clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
|
|
do_fixup_by_compat_u32(blob, "fsl,mpic",
|
|
"clock-frequency", get_bus_freq(0)/2, 1);
|
|
#else
|
|
do_fixup_by_compat_u32(blob, "fsl,mpic",
|
|
"clock-frequency", get_bus_freq(0), 1);
|
|
#endif
|
|
|
|
fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
|
|
|
|
#ifdef CONFIG_MP
|
|
ft_fixup_cpu(blob, (u64)bd->bi_memstart + (u64)bd->bi_memsize);
|
|
ft_fixup_num_cores(blob);
|
|
#endif
|
|
|
|
ft_fixup_cache(blob);
|
|
|
|
#if defined(CONFIG_FSL_ESDHC)
|
|
fdt_fixup_esdhc(blob, bd);
|
|
#endif
|
|
|
|
ft_fixup_dpaa_clks(blob);
|
|
|
|
#if defined(CONFIG_SYS_BMAN_MEM_PHYS)
|
|
fdt_portal(blob, "fsl,bman-portal", "bman-portals",
|
|
(u64)CONFIG_SYS_BMAN_MEM_PHYS,
|
|
CONFIG_SYS_BMAN_MEM_SIZE);
|
|
fdt_fixup_bportals(blob);
|
|
#endif
|
|
|
|
#if defined(CONFIG_SYS_QMAN_MEM_PHYS)
|
|
fdt_portal(blob, "fsl,qman-portal", "qman-portals",
|
|
(u64)CONFIG_SYS_QMAN_MEM_PHYS,
|
|
CONFIG_SYS_QMAN_MEM_SIZE);
|
|
|
|
fdt_fixup_qportals(blob);
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_SRIO
|
|
ft_srio_setup(blob);
|
|
#endif
|
|
|
|
/*
|
|
* system-clock = CCB clock/2
|
|
* Here gd->bus_clk = CCB clock
|
|
* We are using the system clock as 1588 Timer reference
|
|
* clock source select
|
|
*/
|
|
do_fixup_by_compat_u32(blob, "fsl,gianfar-ptp-timer",
|
|
"timer-frequency", gd->bus_clk/2, 1);
|
|
|
|
/*
|
|
* clock-freq should change to clock-frequency and
|
|
* flexcan-v1.0 should change to p1010-flexcan respectively
|
|
* in the future.
|
|
*/
|
|
do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0",
|
|
"clock_freq", gd->bus_clk/2, 1);
|
|
|
|
do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0",
|
|
"clock-frequency", gd->bus_clk/2, 1);
|
|
|
|
do_fixup_by_compat_u32(blob, "fsl,p1010-flexcan",
|
|
"clock-frequency", gd->bus_clk/2, 1);
|
|
|
|
fdt_fixup_usb(blob);
|
|
|
|
fdt_fixup_l2_switch(blob);
|
|
|
|
fdt_fixup_dma3(blob);
|
|
}
|
|
|
|
/*
|
|
* For some CCSR devices, we only have the virtual address, not the physical
|
|
* address. This is because we map CCSR as a whole, so we typically don't need
|
|
* a macro for the physical address of any device within CCSR. In this case,
|
|
* we calculate the physical address of that device using it's the difference
|
|
* between the virtual address of the device and the virtual address of the
|
|
* beginning of CCSR.
|
|
*/
|
|
#define CCSR_VIRT_TO_PHYS(x) \
|
|
(CONFIG_SYS_CCSRBAR_PHYS + ((x) - CONFIG_SYS_CCSRBAR))
|
|
|
|
static void msg(const char *name, uint64_t uaddr, uint64_t daddr)
|
|
{
|
|
printf("Warning: U-Boot configured %s at address %llx,\n"
|
|
"but the device tree has it at %llx\n", name, uaddr, daddr);
|
|
}
|
|
|
|
/*
|
|
* Verify the device tree
|
|
*
|
|
* This function compares several CONFIG_xxx macros that contain physical
|
|
* addresses with the corresponding nodes in the device tree, to see if
|
|
* the physical addresses are all correct. For example, if
|
|
* CONFIG_SYS_NS16550_COM1 is defined, then it contains the virtual address
|
|
* of the first UART. We convert this to a physical address and compare
|
|
* that with the physical address of the first ns16550-compatible node
|
|
* in the device tree. If they don't match, then we display a warning.
|
|
*
|
|
* Returns 1 on success, 0 on failure
|
|
*/
|
|
int ft_verify_fdt(void *fdt)
|
|
{
|
|
uint64_t addr = 0;
|
|
int aliases;
|
|
int off;
|
|
|
|
/* First check the CCSR base address */
|
|
off = fdt_node_offset_by_prop_value(fdt, -1, "device_type", "soc", 4);
|
|
if (off > 0) {
|
|
int size;
|
|
u32 naddr;
|
|
const fdt32_t *prop;
|
|
|
|
naddr = fdt_address_cells(fdt, off);
|
|
prop = fdt_getprop(fdt, off, "ranges", &size);
|
|
addr = fdt_translate_address(fdt, off, prop + naddr);
|
|
}
|
|
|
|
if (!addr) {
|
|
printf("Warning: could not determine base CCSR address in "
|
|
"device tree\n");
|
|
/* No point in checking anything else */
|
|
return 0;
|
|
}
|
|
|
|
if (addr != CONFIG_SYS_CCSRBAR_PHYS) {
|
|
msg("CCSR", CONFIG_SYS_CCSRBAR_PHYS, addr);
|
|
/* No point in checking anything else */
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Check some nodes via aliases. We assume that U-Boot and the device
|
|
* tree enumerate the devices equally. E.g. the first serial port in
|
|
* U-Boot is the same as "serial0" in the device tree.
|
|
*/
|
|
aliases = fdt_path_offset(fdt, "/aliases");
|
|
if (aliases > 0) {
|
|
#ifdef CONFIG_SYS_NS16550_COM1
|
|
if (!fdt_verify_alias_address(fdt, aliases, "serial0",
|
|
CCSR_VIRT_TO_PHYS(CONFIG_SYS_NS16550_COM1)))
|
|
return 0;
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_NS16550_COM2
|
|
if (!fdt_verify_alias_address(fdt, aliases, "serial1",
|
|
CCSR_VIRT_TO_PHYS(CONFIG_SYS_NS16550_COM2)))
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* The localbus node is typically a root node, even though the lbc
|
|
* controller is part of CCSR. If we were to put the lbc node under
|
|
* the SOC node, then the 'ranges' property in the lbc node would
|
|
* translate through the 'ranges' property of the parent SOC node, and
|
|
* we don't want that. Since it's a separate node, it's possible for
|
|
* the 'reg' property to be wrong, so check it here. For now, we
|
|
* only check for "fsl,elbc" nodes.
|
|
*/
|
|
#ifdef CONFIG_SYS_LBC_ADDR
|
|
off = fdt_node_offset_by_compatible(fdt, -1, "fsl,elbc");
|
|
if (off > 0) {
|
|
const fdt32_t *reg = fdt_getprop(fdt, off, "reg", NULL);
|
|
if (reg) {
|
|
uint64_t uaddr = CCSR_VIRT_TO_PHYS(CONFIG_SYS_LBC_ADDR);
|
|
|
|
addr = fdt_translate_address(fdt, off, reg);
|
|
if (uaddr != addr) {
|
|
msg("the localbus", uaddr, addr);
|
|
return 0;
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
return 1;
|
|
}
|
|
|
|
void fdt_del_diu(void *blob)
|
|
{
|
|
int nodeoff = 0;
|
|
|
|
while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
|
|
"fsl,diu")) >= 0) {
|
|
fdt_del_node(blob, nodeoff);
|
|
}
|
|
}
|
|
|