upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
261 lines
6.6 KiB
261 lines
6.6 KiB
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2003 Motorola Inc.
|
|
* Xianghua Xiao (X.Xiao@motorola.com)
|
|
* Modified based on 8260 for 8560.
|
|
*
|
|
* (C) Copyright 2000
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 19-Oct-00.
|
|
*/
|
|
|
|
/*
|
|
* Minimal serial functions needed to use one of the SCC ports
|
|
* as serial console interface.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/cpm_85xx.h>
|
|
#include <serial.h>
|
|
#include <linux/compiler.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#if defined(CONFIG_CONS_ON_SCC)
|
|
|
|
#if CONFIG_CONS_INDEX == 1 /* Console on SCC1 */
|
|
|
|
#define SCC_INDEX 0
|
|
#define PROFF_SCC PROFF_SCC1
|
|
#define CMXSCR_MASK (CMXSCR_GR1|CMXSCR_SC1|\
|
|
CMXSCR_RS1CS_MSK|CMXSCR_TS1CS_MSK)
|
|
#define CMXSCR_VALUE (CMXSCR_RS1CS_BRG1|CMXSCR_TS1CS_BRG1)
|
|
#define CPM_CR_SCC_PAGE CPM_CR_SCC1_PAGE
|
|
#define CPM_CR_SCC_SBLOCK CPM_CR_SCC1_SBLOCK
|
|
|
|
#elif CONFIG_CONS_INDEX == 2 /* Console on SCC2 */
|
|
|
|
#define SCC_INDEX 1
|
|
#define PROFF_SCC PROFF_SCC2
|
|
#define CMXSCR_MASK (CMXSCR_GR2|CMXSCR_SC2|\
|
|
CMXSCR_RS2CS_MSK|CMXSCR_TS2CS_MSK)
|
|
#define CMXSCR_VALUE (CMXSCR_RS2CS_BRG2|CMXSCR_TS2CS_BRG2)
|
|
#define CPM_CR_SCC_PAGE CPM_CR_SCC2_PAGE
|
|
#define CPM_CR_SCC_SBLOCK CPM_CR_SCC2_SBLOCK
|
|
|
|
#elif CONFIG_CONS_INDEX == 3 /* Console on SCC3 */
|
|
|
|
#define SCC_INDEX 2
|
|
#define PROFF_SCC PROFF_SCC3
|
|
#define CMXSCR_MASK (CMXSCR_GR3|CMXSCR_SC3|\
|
|
CMXSCR_RS3CS_MSK|CMXSCR_TS3CS_MSK)
|
|
#define CMXSCR_VALUE (CMXSCR_RS3CS_BRG3|CMXSCR_TS3CS_BRG3)
|
|
#define CPM_CR_SCC_PAGE CPM_CR_SCC3_PAGE
|
|
#define CPM_CR_SCC_SBLOCK CPM_CR_SCC3_SBLOCK
|
|
|
|
#elif CONFIG_CONS_INDEX == 4 /* Console on SCC4 */
|
|
|
|
#define SCC_INDEX 3
|
|
#define PROFF_SCC PROFF_SCC4
|
|
#define CMXSCR_MASK (CMXSCR_GR4|CMXSCR_SC4|\
|
|
CMXSCR_RS4CS_MSK|CMXSCR_TS4CS_MSK)
|
|
#define CMXSCR_VALUE (CMXSCR_RS4CS_BRG4|CMXSCR_TS4CS_BRG4)
|
|
#define CPM_CR_SCC_PAGE CPM_CR_SCC4_PAGE
|
|
#define CPM_CR_SCC_SBLOCK CPM_CR_SCC4_SBLOCK
|
|
|
|
#else
|
|
|
|
#error "console not correctly defined"
|
|
|
|
#endif
|
|
|
|
static int mpc85xx_serial_init(void)
|
|
{
|
|
volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
|
|
volatile ccsr_cpm_scc_t *sp;
|
|
volatile scc_uart_t *up;
|
|
volatile cbd_t *tbdf, *rbdf;
|
|
volatile ccsr_cpm_cp_t *cp = &(cpm->im_cpm_cp);
|
|
uint dpaddr;
|
|
|
|
/* initialize pointers to SCC */
|
|
|
|
sp = (ccsr_cpm_scc_t *) &(cpm->im_cpm_scc[SCC_INDEX]);
|
|
up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
|
|
|
|
/* Disable transmitter/receiver.
|
|
*/
|
|
sp->gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
|
|
|
|
/* put the SCC channel into NMSI (non multiplexd serial interface)
|
|
* mode and wire the selected SCC Tx and Rx clocks to BRGx (15-15).
|
|
*/
|
|
cpm->im_cpm_mux.cmxscr = \
|
|
(cpm->im_cpm_mux.cmxscr&~CMXSCR_MASK)|CMXSCR_VALUE;
|
|
|
|
/* Set up the baud rate generator.
|
|
*/
|
|
serial_setbrg ();
|
|
|
|
/* Allocate space for two buffer descriptors in the DP ram.
|
|
* damm: allocating space after the two buffers for rx/tx data
|
|
*/
|
|
|
|
dpaddr = m8560_cpm_dpalloc((2 * sizeof (cbd_t)) + 2, 16);
|
|
|
|
/* Set the physical address of the host memory buffers in
|
|
* the buffer descriptors.
|
|
*/
|
|
rbdf = (cbd_t *)&(cpm->im_dprambase[dpaddr]);
|
|
rbdf->cbd_bufaddr = (uint) (rbdf+2);
|
|
rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
|
|
tbdf = rbdf + 1;
|
|
tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1;
|
|
tbdf->cbd_sc = BD_SC_WRAP;
|
|
|
|
/* Set up the uart parameters in the parameter ram.
|
|
*/
|
|
up->scc_genscc.scc_rbase = dpaddr;
|
|
up->scc_genscc.scc_tbase = dpaddr+sizeof(cbd_t);
|
|
up->scc_genscc.scc_rfcr = CPMFCR_EB;
|
|
up->scc_genscc.scc_tfcr = CPMFCR_EB;
|
|
up->scc_genscc.scc_mrblr = 1;
|
|
up->scc_maxidl = 0;
|
|
up->scc_brkcr = 1;
|
|
up->scc_parec = 0;
|
|
up->scc_frmec = 0;
|
|
up->scc_nosec = 0;
|
|
up->scc_brkec = 0;
|
|
up->scc_uaddr1 = 0;
|
|
up->scc_uaddr2 = 0;
|
|
up->scc_toseq = 0;
|
|
up->scc_char1 = up->scc_char2 = up->scc_char3 = up->scc_char4 = 0x8000;
|
|
up->scc_char5 = up->scc_char6 = up->scc_char7 = up->scc_char8 = 0x8000;
|
|
up->scc_rccm = 0xc0ff;
|
|
|
|
/* Mask all interrupts and remove anything pending.
|
|
*/
|
|
sp->sccm = 0;
|
|
sp->scce = 0xffff;
|
|
|
|
/* Set 8 bit FIFO, 16 bit oversampling and UART mode.
|
|
*/
|
|
sp->gsmrh = SCC_GSMRH_RFW; /* 8 bit FIFO */
|
|
sp->gsmrl = \
|
|
SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16 | SCC_GSMRL_MODE_UART;
|
|
|
|
/* Set CTS no flow control, 1 stop bit, 8 bit character length,
|
|
* normal async UART mode, no parity
|
|
*/
|
|
sp->psmr = SCU_PSMR_CL;
|
|
|
|
/* execute the "Init Rx and Tx params" CP command.
|
|
*/
|
|
|
|
while (cp->cpcr & CPM_CR_FLG) /* wait if cp is busy */
|
|
;
|
|
|
|
cp->cpcr = mk_cr_cmd(CPM_CR_SCC_PAGE, CPM_CR_SCC_SBLOCK,
|
|
0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
|
|
|
|
while (cp->cpcr & CPM_CR_FLG) /* wait if cp is busy */
|
|
;
|
|
|
|
/* Enable transmitter/receiver.
|
|
*/
|
|
sp->gsmrl |= SCC_GSMRL_ENR | SCC_GSMRL_ENT;
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void mpc85xx_serial_setbrg(void)
|
|
{
|
|
#if defined(CONFIG_CONS_USE_EXTC)
|
|
m8560_cpm_extcbrg(SCC_INDEX, gd->baudrate,
|
|
CONFIG_CONS_EXTC_RATE, CONFIG_CONS_EXTC_PINSEL);
|
|
#else
|
|
m8560_cpm_setbrg(SCC_INDEX, gd->baudrate);
|
|
#endif
|
|
}
|
|
|
|
static void mpc85xx_serial_putc(const char c)
|
|
{
|
|
volatile scc_uart_t *up;
|
|
volatile cbd_t *tbdf;
|
|
volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
|
|
|
|
if (c == '\n')
|
|
serial_putc ('\r');
|
|
|
|
up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
|
|
tbdf = (cbd_t *)&(cpm->im_dprambase[up->scc_genscc.scc_tbase]);
|
|
|
|
/* Wait for last character to go.
|
|
*/
|
|
while (tbdf->cbd_sc & BD_SC_READY)
|
|
;
|
|
|
|
/* Load the character into the transmit buffer.
|
|
*/
|
|
*(volatile char *)tbdf->cbd_bufaddr = c;
|
|
tbdf->cbd_datlen = 1;
|
|
tbdf->cbd_sc |= BD_SC_READY;
|
|
}
|
|
|
|
static int mpc85xx_serial_getc(void)
|
|
{
|
|
volatile cbd_t *rbdf;
|
|
volatile scc_uart_t *up;
|
|
volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
|
|
unsigned char c;
|
|
|
|
up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
|
|
rbdf = (cbd_t *)&(cpm->im_dprambase[up->scc_genscc.scc_rbase]);
|
|
|
|
/* Wait for character to show up.
|
|
*/
|
|
while (rbdf->cbd_sc & BD_SC_EMPTY)
|
|
;
|
|
|
|
/* Grab the char and clear the buffer again.
|
|
*/
|
|
c = *(volatile unsigned char *)rbdf->cbd_bufaddr;
|
|
rbdf->cbd_sc |= BD_SC_EMPTY;
|
|
|
|
return (c);
|
|
}
|
|
|
|
static int mpc85xx_serial_tstc(void)
|
|
{
|
|
volatile cbd_t *rbdf;
|
|
volatile scc_uart_t *up;
|
|
volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
|
|
|
|
up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
|
|
rbdf = (cbd_t *)&(cpm->im_dprambase[up->scc_genscc.scc_rbase]);
|
|
|
|
return ((rbdf->cbd_sc & BD_SC_EMPTY) == 0);
|
|
}
|
|
|
|
static struct serial_device mpc85xx_serial_drv = {
|
|
.name = "mpc85xx_serial",
|
|
.start = mpc85xx_serial_init,
|
|
.stop = NULL,
|
|
.setbrg = mpc85xx_serial_setbrg,
|
|
.putc = mpc85xx_serial_putc,
|
|
.puts = default_serial_puts,
|
|
.getc = mpc85xx_serial_getc,
|
|
.tstc = mpc85xx_serial_tstc,
|
|
};
|
|
|
|
void mpc85xx_serial_initialize(void)
|
|
{
|
|
serial_register(&mpc85xx_serial_drv);
|
|
}
|
|
|
|
__weak struct serial_device *default_serial_console(void)
|
|
{
|
|
return &mpc85xx_serial_drv;
|
|
}
|
|
#endif /* CONFIG_CONS_ON_SCC */
|
|
|