upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
217 lines
7.3 KiB
217 lines
7.3 KiB
/*
|
|
* Copyright (C) 2004 PaulReynolds@lhsolutions.com
|
|
*
|
|
* (C) Copyright 2007
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/processor.h>
|
|
#include <spd_sdram.h>
|
|
#include <asm/ppc4xx-emac.h>
|
|
#include <netdev.h>
|
|
|
|
#ifdef CONFIG_SYS_INIT_SHOW_RESET_REG
|
|
void show_reset_reg(void);
|
|
#endif
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int lcd_init(void);
|
|
|
|
int board_early_init_f (void)
|
|
{
|
|
unsigned long reg;
|
|
volatile unsigned int *GpioOdr;
|
|
volatile unsigned int *GpioTcr;
|
|
volatile unsigned int *GpioOr;
|
|
|
|
/*-------------------------------------------------------------------------+
|
|
| Initialize EBC CONFIG
|
|
+-------------------------------------------------------------------------*/
|
|
mtebc(EBC0_CFG, EBC_CFG_LE_UNLOCK |
|
|
EBC_CFG_PTD_ENABLE | EBC_CFG_RTC_64PERCLK |
|
|
EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS |
|
|
EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_DEFAULT |
|
|
EBC_CFG_PME_DISABLE | EBC_CFG_PR_32);
|
|
|
|
/*-------------------------------------------------------------------------+
|
|
| 64MB FLASH. Initialize bank 0 with default values.
|
|
+-------------------------------------------------------------------------*/
|
|
mtebc(PB0AP, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(15) |
|
|
EBC_BXAP_BCE_DISABLE |
|
|
EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_OEN_ENCODE(1) |
|
|
EBC_BXAP_WBN_ENCODE(1) | EBC_BXAP_WBF_ENCODE(1) |
|
|
EBC_BXAP_TH_ENCODE(3) | EBC_BXAP_RE_DISABLED |
|
|
EBC_BXAP_BEM_WRITEONLY |
|
|
EBC_BXAP_PEN_DISABLED);
|
|
mtebc(PB0CR, EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) |
|
|
EBC_BXCR_BS_64MB | EBC_BXCR_BU_RW|EBC_BXCR_BW_32BIT);
|
|
|
|
/*-------------------------------------------------------------------------+
|
|
| FPGA. Initialize bank 1 with default values.
|
|
+-------------------------------------------------------------------------*/
|
|
mtebc(PB1AP, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(5) |
|
|
EBC_BXAP_BCE_DISABLE |
|
|
EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_OEN_ENCODE(1) |
|
|
EBC_BXAP_WBN_ENCODE(1) | EBC_BXAP_WBF_ENCODE(1) |
|
|
EBC_BXAP_TH_ENCODE(3) | EBC_BXAP_RE_DISABLED |
|
|
EBC_BXAP_BEM_WRITEONLY |
|
|
EBC_BXAP_PEN_DISABLED);
|
|
mtebc(PB1CR, EBC_BXCR_BAS_ENCODE(0x41000000) |
|
|
EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT);
|
|
|
|
/*-------------------------------------------------------------------------+
|
|
| LCM. Initialize bank 2 with default values.
|
|
+-------------------------------------------------------------------------*/
|
|
mtebc(PB2AP, EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(64) |
|
|
EBC_BXAP_BCE_DISABLE |
|
|
EBC_BXAP_CSN_ENCODE(3) | EBC_BXAP_OEN_ENCODE(3) |
|
|
EBC_BXAP_WBN_ENCODE(3) | EBC_BXAP_WBF_ENCODE(3) |
|
|
EBC_BXAP_TH_ENCODE(7) | EBC_BXAP_RE_DISABLED |
|
|
EBC_BXAP_BEM_WRITEONLY |
|
|
EBC_BXAP_PEN_DISABLED);
|
|
mtebc(PB2CR, EBC_BXCR_BAS_ENCODE(0x42000000) |
|
|
EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW|EBC_BXCR_BW_8BIT);
|
|
|
|
/*-------------------------------------------------------------------------+
|
|
| TMP. Initialize bank 3 with default values.
|
|
+-------------------------------------------------------------------------*/
|
|
mtebc(PB3AP, EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(128) |
|
|
EBC_BXAP_BCE_DISABLE |
|
|
EBC_BXAP_CSN_ENCODE(3) | EBC_BXAP_OEN_ENCODE(3) |
|
|
EBC_BXAP_WBN_ENCODE(3) | EBC_BXAP_WBF_ENCODE(3) |
|
|
EBC_BXAP_TH_ENCODE(7) | EBC_BXAP_RE_DISABLED |
|
|
EBC_BXAP_BEM_WRITEONLY |
|
|
EBC_BXAP_PEN_DISABLED);
|
|
mtebc(PB3CR, EBC_BXCR_BAS_ENCODE(0x48000000) |
|
|
EBC_BXCR_BS_64MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
|
|
|
|
/*-------------------------------------------------------------------------+
|
|
| Connector 4~7. Initialize bank 3~ 7 with default values.
|
|
+-------------------------------------------------------------------------*/
|
|
mtebc(PB4AP,0);
|
|
mtebc(PB4CR,0);
|
|
mtebc(PB5AP,0);
|
|
mtebc(PB5CR,0);
|
|
mtebc(PB6AP,0);
|
|
mtebc(PB6CR,0);
|
|
mtebc(PB7AP,0);
|
|
mtebc(PB7CR,0);
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Setup the interrupt controller polarities, triggers, etc.
|
|
*-------------------------------------------------------------------*/
|
|
/*
|
|
* Because of the interrupt handling rework to handle 440GX interrupts
|
|
* with the common code, we needed to change names of the UIC registers.
|
|
* Here the new relationship:
|
|
*
|
|
* U-Boot name 440GX name
|
|
* -----------------------
|
|
* UIC0 UICB0
|
|
* UIC1 UIC0
|
|
* UIC2 UIC1
|
|
* UIC3 UIC2
|
|
*/
|
|
mtdcr (UIC1SR, 0xffffffff); /* clear all */
|
|
mtdcr (UIC1ER, 0x00000000); /* disable all */
|
|
mtdcr (UIC1CR, 0x00000009); /* SMI & UIC1 crit are critical */
|
|
mtdcr (UIC1PR, 0xfffffe13); /* per ref-board manual */
|
|
mtdcr (UIC1TR, 0x01c00008); /* per ref-board manual */
|
|
mtdcr (UIC1VR, 0x00000001); /* int31 highest, base=0x000 */
|
|
mtdcr (UIC1SR, 0xffffffff); /* clear all */
|
|
|
|
mtdcr (UIC2SR, 0xffffffff); /* clear all */
|
|
mtdcr (UIC2ER, 0x00000000); /* disable all */
|
|
mtdcr (UIC2CR, 0x00000000); /* all non-critical */
|
|
mtdcr (UIC2PR, 0xffffe0ff); /* per ref-board manual */
|
|
mtdcr (UIC2TR, 0x00ffc000); /* per ref-board manual */
|
|
mtdcr (UIC2VR, 0x00000001); /* int31 highest, base=0x000 */
|
|
mtdcr (UIC2SR, 0xffffffff); /* clear all */
|
|
|
|
mtdcr (UIC3SR, 0xffffffff); /* clear all */
|
|
mtdcr (UIC3ER, 0x00000000); /* disable all */
|
|
mtdcr (UIC3CR, 0x00000000); /* all non-critical */
|
|
mtdcr (UIC3PR, 0xffffffff); /* per ref-board manual */
|
|
mtdcr (UIC3TR, 0x00ff8c0f); /* per ref-board manual */
|
|
mtdcr (UIC3VR, 0x00000001); /* int31 highest, base=0x000 */
|
|
mtdcr (UIC3SR, 0xffffffff); /* clear all */
|
|
|
|
mtdcr (UIC0SR, 0xfc000000); /* clear all */
|
|
mtdcr (UIC0ER, 0x00000000); /* disable all */
|
|
mtdcr (UIC0CR, 0x00000000); /* all non-critical */
|
|
mtdcr (UIC0PR, 0xfc000000); /* */
|
|
mtdcr (UIC0TR, 0x00000000); /* */
|
|
mtdcr (UIC0VR, 0x00000001); /* */
|
|
|
|
/* Enable two GPIO 10~11 and TraceA signal */
|
|
mfsdr(SDR0_PFC0,reg);
|
|
reg |= 0x00300000;
|
|
mtsdr(SDR0_PFC0,reg);
|
|
|
|
mfsdr(SDR0_PFC1,reg);
|
|
reg |= 0x00100000;
|
|
mtsdr(SDR0_PFC1,reg);
|
|
|
|
/* Set GPIO 10 and 11 as output */
|
|
GpioOdr = (volatile unsigned int*)(CONFIG_SYS_PERIPHERAL_BASE+0x718);
|
|
GpioTcr = (volatile unsigned int*)(CONFIG_SYS_PERIPHERAL_BASE+0x704);
|
|
GpioOr = (volatile unsigned int*)(CONFIG_SYS_PERIPHERAL_BASE+0x700);
|
|
|
|
*GpioOdr &= ~(0x00300000);
|
|
*GpioTcr |= 0x00300000;
|
|
*GpioOr |= 0x00300000;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
lcd_init();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard (void)
|
|
{
|
|
char buf[64];
|
|
int i = getenv_f("serial#", buf, sizeof(buf));
|
|
|
|
printf ("Board: Taishan - AMCC PPC440GX Evaluation Board");
|
|
if (i > 0) {
|
|
puts(", serial# ");
|
|
puts(buf);
|
|
}
|
|
putc ('\n');
|
|
|
|
#ifdef CONFIG_SYS_INIT_SHOW_RESET_REG
|
|
show_reset_reg();
|
|
#endif
|
|
|
|
return (0);
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
cpu_eth_init(bis);
|
|
return pci_eth_init(bis);
|
|
}
|
|
|