upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/edb93xx/sdram_cfg.h

144 lines
3.8 KiB

/*
* Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
*
* Copyright (C) 2006 Dominic Rath <Dominic.Rath@gmx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <asm/arch/ep93xx.h>
#define SDRAM_BASE_ADDR PHYS_SDRAM_1
#ifdef CONFIG_EDB93XX_SDCS0
#define SDRAM_DEVCFG_REG devcfg0
#elif defined(CONFIG_EDB93XX_SDCS3)
#define SDRAM_DEVCFG_REG devcfg3
#else
#error "SDRAM bank configuration"
#endif
#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302) || \
defined(CONFIG_EDB9302A)
/*
* 1x Samsung K4S561632C-TC/L75 4M x 16bit x 4 banks SDRAM
*
* CLK cycle time min:
* @ CAS latency = 3: 7.5ns
* @ CAS latency = 2: 10ns
* We're running at 66MHz (15ns cycle time) external bus speed (HCLK),
* so it's safe to use CAS latency = 2
*
* RAS-to-CAS delay min:
* 20ns
* At 15ns cycle time, we use RAS-to-CAS delay = 2
*
* SROMLL = 1: Swap BA[1:0] with A[13:12], making the SDRAM appear
* as four blocks of 8MB size, instead of eight blocks of 4MB size:
*
* EDB9301/EDB9302:
*
* 0x00000000 - 0x007fffff
* 0x01000000 - 0x017fffff
* 0x04000000 - 0x047fffff
* 0x05000000 - 0x057fffff
*
*
* EDB9302a:
*
* 0xc0000000 - 0xc07fffff
* 0xc1000000 - 0xc17fffff
* 0xc4000000 - 0xc47fffff
* 0xc5000000 - 0xc57fffff
*
* BANKCOUNT = 1: This is a device with four banks
*/
#define SDRAM_DEVCFG_VAL (SDRAM_DEVCFG_BANKCOUNT | \
SDRAM_DEVCFG_SROMLL | \
SDRAM_DEVCFG_CASLAT_2 | \
SDRAM_DEVCFG_RASTOCAS_2 | \
SDRAM_DEVCFG_EXTBUSWIDTH)
/*
* 16 bit ext. bus
*
* A[22:09] is output as SYA[13:0]
* CAS latency: 2
* Burst type: sequential
* Burst length: 8 (required for 16 bit ext. bus)
* SYA[13:0] = 0x0023
*/
#define SDRAM_MODE_REG_VAL 0x4600
#define SDRAM_BANK_SEL_0 0x00000000 /* A[22:21] = b00 */
#define SDRAM_BANK_SEL_1 0x00200000 /* A[22:21] = b01 */
#define SDRAM_BANK_SEL_2 0x00400000 /* A[22:21] = b10 */
#define SDRAM_BANK_SEL_3 0x00600000 /* A[22:21] = b11 */
#elif defined(CONFIG_EDB9307) || defined(CONFIG_EDB9307A) || \
defined CONFIG_EDB9312 || defined(CONFIG_EDB9315) || \
defined(CONFIG_EDB9315A)
/*
* 2x Samsung K4S561632C-TC/L75 4M x 16bit x 4 banks SDRAM
*
* CLK cycle time min:
* @ CAS latency = 3: 7.5ns
* @ CAS latency = 2: 10ns
* We're running at 100MHz (10ns cycle time) external bus speed (HCLK),
* so it's safe to use CAS latency = 2
*
* RAS-to-CAS delay min:
* 20ns
* At 10ns cycle time, we use RAS-to-CAS delay = 2
*
* EDB9307, EDB9312, EDB9315:
*
* 0x00000000 - 0x01ffffff
* 0x04000000 - 0x05ffffff
*
*
* EDB9307a, EDB9315a:
*
* 0xc0000000 - 0xc1ffffff
* 0xc4000000 - 0xc5ffffff
*/
#define SDRAM_DEVCFG_VAL (SDRAM_DEVCFG_BANKCOUNT | \
SDRAM_DEVCFG_SROMLL | \
SDRAM_DEVCFG_CASLAT_2 | \
SDRAM_DEVCFG_RASTOCAS_2)
/*
* 32 bit ext. bus
*
* A[23:10] is output as SYA[13:0]
* CAS latency: 2
* Burst type: sequential
* Burst length: 4
* SYA[13:0] = 0x0022
*/
#define SDRAM_MODE_REG_VAL 0x8800
#define SDRAM_BANK_SEL_0 0x00000000 /* A[23:22] = b00 */
#define SDRAM_BANK_SEL_1 0x00400000 /* A[23:22] = b01 */
#define SDRAM_BANK_SEL_2 0x00800000 /* A[23:22] = b10 */
#define SDRAM_BANK_SEL_3 0x00c00000 /* A[23:22] = b11 */
#endif