upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support

You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Ilya Yanok c60795f41d usb: use linux/usb/ch9.h instead of usbdescriptors.h ... Linux usb/ch9.h seems to have all the same information (and more) as usbdescriptors.h so use the former instead of the later one. As a consequense of this change USB_SPEED_* values don't correspond directly to EHCI speed encoding anymore, I've added necessary recoding in EHCI driver. Also there is no point to put speed into pipe anymore so it's removed and a bunch of host drivers fixed to look at usb_device->speed instead. Old usbdescriptors.h included is not removed as it seems to be used by old USB device code. This makes usb.h and usbdevice.h incompatible. Fortunately the only place that tries to include both are the old MUSB code and it needs usb.h only for USB_DMA_MINALIGN used in aligned attribute on musb_regs structure but this attribute seems to be unneeded (old MUSB code doesn't support any DMA at all). Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>		12 years ago
..
Makefile	split AU1X00 specific code from cmd_ide.c	12 years ago
au1x00_eth.c	…
au1x00_ide.c	split AU1X00 specific code from cmd_ide.c	12 years ago
au1x00_serial.c	serial: Use default_serial_puts() in drivers	12 years ago
au1x00_usb_ohci.c	usb: use linux/usb/ch9.h instead of usbdescriptors.h	12 years ago
au1x00_usb_ohci.h	…
config.mk	…