upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
296 lines
9.4 KiB
296 lines
9.4 KiB
/*
|
|
* (C) Copyright 2002
|
|
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
|
* Marius Groeger <mgroeger@sysgo.de>
|
|
* Gary Jennejohn <garyj@denx.de>
|
|
* David Mueller <d.mueller@elsoft.ch>
|
|
*
|
|
* (C) Copyright 2008
|
|
* Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
|
|
*
|
|
* Configuation settings for the SAMSUNG SMDK6400(mDirac-III) board.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
#define CONFIG_S3C6400 1 /* in a SAMSUNG S3C6400 SoC */
|
|
#define CONFIG_S3C64XX 1 /* in a SAMSUNG S3C64XX Family */
|
|
#define CONFIG_SMDK6400 1 /* on a SAMSUNG SMDK6400 Board */
|
|
|
|
#define CONFIG_PERIPORT_REMAP
|
|
#define CONFIG_PERIPORT_BASE 0x70000000
|
|
#define CONFIG_PERIPORT_SIZE 0x13
|
|
|
|
#define CONFIG_SYS_IRAM_BASE 0x0c000000 /* Internal SRAM base address */
|
|
#define CONFIG_SYS_IRAM_SIZE 0x2000 /* 8 KB of internal SRAM memory */
|
|
#define CONFIG_SYS_IRAM_END (CONFIG_SYS_IRAM_BASE + CONFIG_SYS_IRAM_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_IRAM_END - GENERATED_GBL_DATA_SIZE)
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE 0x50000000
|
|
|
|
/* input clock of PLL: SMDK6400 has 12MHz input clock */
|
|
#define CONFIG_SYS_CLK_FREQ 12000000
|
|
|
|
#if !defined(CONFIG_NAND_SPL) && (CONFIG_SYS_TEXT_BASE >= 0xc0000000)
|
|
#define CONFIG_ENABLE_MMU
|
|
#endif
|
|
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
#define CONFIG_CMDLINE_TAG
|
|
#define CONFIG_INITRD_TAG
|
|
|
|
/*
|
|
* Architecture magic and machine type
|
|
*/
|
|
#define CONFIG_MACH_TYPE 1270
|
|
|
|
#define CONFIG_DISPLAY_CPUINFO
|
|
#define CONFIG_DISPLAY_BOARDINFO
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024)
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
#define CONFIG_CS8900 /* we have a CS8900 on-board */
|
|
#define CONFIG_CS8900_BASE 0x18800300
|
|
#define CONFIG_CS8900_BUS16 /* follow the Linux driver */
|
|
|
|
/*
|
|
* select serial console configuration
|
|
*/
|
|
#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK6400 */
|
|
|
|
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
|
|
|
|
#define CONFIG_CMDLINE_EDITING
|
|
|
|
/* allow to overwrite serial and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
/***********************************************************
|
|
* Command definition
|
|
***********************************************************/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_CACHE
|
|
#define CONFIG_CMD_REGINFO
|
|
#define CONFIG_CMD_LOADS
|
|
#define CONFIG_CMD_LOADB
|
|
#define CONFIG_CMD_SAVEENV
|
|
#define CONFIG_CMD_NAND
|
|
#if defined(CONFIG_BOOT_ONENAND)
|
|
#define CONFIG_CMD_ONENAND
|
|
#endif
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_ELF
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_EXT2
|
|
|
|
#define CONFIG_BOOTDELAY 3
|
|
|
|
#define CONFIG_ZERO_BOOTDELAY_CHECK
|
|
|
|
#if (CONFIG_COMMANDS & CONFIG_CMD_KGDB)
|
|
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
|
|
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
|
|
#endif
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#define CONFIG_SYS_PROMPT "SMDK6400 # " /* Monitor Command Prompt */
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE /* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x7e00000) /* 126MB in DRAM */
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE /* default load address */
|
|
|
|
#define CONFIG_SYS_HZ 1000
|
|
|
|
/**********************************
|
|
Support Clock Settings
|
|
**********************************
|
|
Setting SYNC ASYNC
|
|
----------------------------------
|
|
667_133_66 X O
|
|
533_133_66 O O
|
|
400_133_66 X O
|
|
400_100_50 O O
|
|
**********************************/
|
|
|
|
/*#define CONFIG_CLK_667_133_66*/
|
|
#define CONFIG_CLK_533_133_66
|
|
/*
|
|
#define CONFIG_CLK_400_100_50
|
|
#define CONFIG_CLK_400_133_66
|
|
#define CONFIG_SYNC_MODE
|
|
*/
|
|
|
|
/* SMDK6400 has 2 banks of DRAM, but we use only one in U-Boot */
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* SDRAM Bank #1 */
|
|
#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB in Bank #1 */
|
|
|
|
#define CONFIG_SYS_FLASH_BASE 0x10000000
|
|
#define CONFIG_SYS_MONITOR_BASE 0x00000000
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH and environment organization
|
|
*/
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
|
/* AM29LV160B has 35 sectors, AM29LV800B - 19 */
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 40
|
|
|
|
#define CONFIG_AMD_LV800
|
|
#define CONFIG_SYS_FLASH_CFI 1 /* Use CFI parameters (needed?) */
|
|
/* Use drivers/cfi_flash.c, even though the flash is not CFI-compliant */
|
|
#define CONFIG_FLASH_CFI_DRIVER 1
|
|
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
|
|
#define CONFIG_FLASH_CFI_LEGACY
|
|
#define CONFIG_SYS_FLASH_LEGACY_512Kx16
|
|
|
|
/* timeout values are in ticks */
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT (5 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT (5 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
|
|
|
|
#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
|
|
|
|
/*
|
|
* SMDK6400 board specific data
|
|
*/
|
|
|
|
#define CONFIG_IDENT_STRING " for SMDK6400"
|
|
|
|
/* base address for uboot */
|
|
#define CONFIG_SYS_PHY_UBOOT_BASE (CONFIG_SYS_SDRAM_BASE + 0x07e00000)
|
|
/* total memory available to uboot */
|
|
#define CONFIG_SYS_UBOOT_SIZE (1024 * 1024)
|
|
|
|
/* Put environment copies after the end of U-Boot owned RAM */
|
|
#define CONFIG_NAND_ENV_DST (CONFIG_SYS_UBOOT_BASE + CONFIG_SYS_UBOOT_SIZE)
|
|
|
|
#ifdef CONFIG_ENABLE_MMU
|
|
#define CONFIG_SYS_MAPPED_RAM_BASE 0xc0000000
|
|
#define CONFIG_BOOTCOMMAND "nand read 0xc0018000 0x60000 0x1c0000;" \
|
|
"bootm 0xc0018000"
|
|
#else
|
|
#define CONFIG_SYS_MAPPED_RAM_BASE CONFIG_SYS_SDRAM_BASE
|
|
#define CONFIG_BOOTCOMMAND "nand read 0x50018000 0x60000 0x1c0000;" \
|
|
"bootm 0x50018000"
|
|
#endif
|
|
|
|
/* NAND U-Boot load and start address */
|
|
#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_MAPPED_RAM_BASE + 0x07e00000)
|
|
|
|
#define CONFIG_ENV_OFFSET 0x0040000
|
|
|
|
/* NAND configuration */
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE 0x70200010
|
|
#define CONFIG_SYS_S3C_NAND_HWECC
|
|
|
|
#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
|
|
#define CONFIG_SYS_NAND_WP 1
|
|
#define CONFIG_SYS_NAND_YAFFS_WRITE 1 /* support yaffs write */
|
|
#define CONFIG_SYS_NAND_BBT_2NDPAGE 1 /* bad-block markers in 1st and 2nd pages */
|
|
|
|
#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_PHY_UBOOT_BASE /* NUB load-addr */
|
|
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST /* NUB start-addr */
|
|
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS (4 * 1024) /* Offset to RAM U-Boot image */
|
|
#define CONFIG_SYS_NAND_U_BOOT_SIZE (252 * 1024) /* Size of RAM U-Boot image */
|
|
|
|
/* NAND chip page size */
|
|
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
|
|
/* NAND chip block size */
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
|
|
/* NAND chip page per block count */
|
|
#define CONFIG_SYS_NAND_PAGE_COUNT 64
|
|
/* Location of the bad-block label */
|
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
|
|
/* Extra address cycle for > 128MiB */
|
|
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
|
|
|
/* Size of the block protected by one OOB (Spare Area in Samsung terminology) */
|
|
#define CONFIG_SYS_NAND_ECCSIZE CONFIG_SYS_NAND_PAGE_SIZE
|
|
/* Number of ECC bytes per OOB - S3C6400 calculates 4 bytes ECC in 1-bit mode */
|
|
#define CONFIG_SYS_NAND_ECCBYTES 4
|
|
/* Size of a single OOB region */
|
|
#define CONFIG_SYS_NAND_OOBSIZE 64
|
|
/* ECC byte positions */
|
|
#define CONFIG_SYS_NAND_ECCPOS {40, 41, 42, 43, 44, 45, 46, 47, \
|
|
48, 49, 50, 51, 52, 53, 54, 55, \
|
|
56, 57, 58, 59, 60, 61, 62, 63}
|
|
|
|
/* Boot configuration (define only one of next 3) */
|
|
#define CONFIG_BOOT_NAND
|
|
/* None of these are currently implemented. Left from the original Samsung
|
|
* version for reference
|
|
#define CONFIG_BOOT_NOR
|
|
#define CONFIG_BOOT_MOVINAND
|
|
#define CONFIG_BOOT_ONENAND
|
|
*/
|
|
|
|
#define CONFIG_NAND
|
|
#define CONFIG_NAND_S3C64XX
|
|
/* Unimplemented or unsupported. See comment above.
|
|
#define CONFIG_ONENAND
|
|
#define CONFIG_MOVINAND
|
|
*/
|
|
|
|
/* Settings as above boot configuration */
|
|
#define CONFIG_ENV_IS_IN_NAND
|
|
#define CONFIG_BOOTARGS "console=ttySAC,115200"
|
|
|
|
#if !defined(CONFIG_ENABLE_MMU)
|
|
#define CONFIG_CMD_USB 1
|
|
#define CONFIG_USB_S3C64XX
|
|
#define CONFIG_USB_OHCI_NEW 1
|
|
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x74300000
|
|
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "s3c6400"
|
|
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3
|
|
#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
|
|
|
|
#define CONFIG_USB_STORAGE 1
|
|
#endif
|
|
#define CONFIG_DOS_PARTITION 1
|
|
|
|
#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_ENABLE_MMU)
|
|
# error "usb_ohci.c is currently broken with MMU enabled."
|
|
#endif
|
|
|
|
#endif /* __CONFIG_H */
|
|
|