upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
316 lines
8.3 KiB
316 lines
8.3 KiB
/*
|
|
* (C) Copyright 2003
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* (C) Copyright 2004
|
|
* Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
|
|
*
|
|
* (C) Copyright 2005-2009
|
|
* Modified for InterControl digsyMTC MPC5200 board by
|
|
* Frank Bodammer, GCD Hard- & Software GmbH,
|
|
* frank.bodammer@gcd-solutions.de
|
|
*
|
|
* (C) Copyright 2009
|
|
* Grzegorz Bernacki, Semihalf, gjb@semihalf.com
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <mpc5xxx.h>
|
|
#include <net.h>
|
|
#include <pci.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include "eeprom.h"
|
|
#include "is42s16800a-7t.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
extern int usb_cpu_init(void);
|
|
|
|
#ifndef CONFIG_SYS_RAMBOOT
|
|
static void sdram_start(int hi_addr)
|
|
{
|
|
long hi_addr_bit = hi_addr ? 0x01000000 : 0;
|
|
long control = SDRAM_CONTROL | hi_addr_bit;
|
|
|
|
/* unlock mode register */
|
|
out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000000);
|
|
|
|
/* precharge all banks */
|
|
out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000002);
|
|
|
|
/* auto refresh */
|
|
out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000004);
|
|
|
|
/* set mode register */
|
|
out_be32((void *)MPC5XXX_SDRAM_MODE, SDRAM_MODE);
|
|
|
|
/* normal operation */
|
|
out_be32((void *)MPC5XXX_SDRAM_CTRL, control);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* ATTENTION: Although partially referenced initdram does NOT make real use
|
|
* use of CONFIG_SYS_SDRAM_BASE. The code does not work if
|
|
* CONFIG_SYS_SDRAM_BASE is something else than 0x00000000.
|
|
*/
|
|
|
|
phys_size_t initdram(int board_type)
|
|
{
|
|
ulong dramsize = 0;
|
|
ulong dramsize2 = 0;
|
|
uint svr, pvr;
|
|
#ifndef CONFIG_SYS_RAMBOOT
|
|
ulong test1, test2;
|
|
|
|
/* setup SDRAM chip selects */
|
|
out_be32((void *)MPC5XXX_SDRAM_CS0CFG, 0x0000001C); /* 512MB at 0x0 */
|
|
out_be32((void *)MPC5XXX_SDRAM_CS1CFG, 0x80000000); /* disabled */
|
|
|
|
/* setup config registers */
|
|
out_be32((void *)MPC5XXX_SDRAM_CONFIG1, SDRAM_CONFIG1);
|
|
out_be32((void *)MPC5XXX_SDRAM_CONFIG2, SDRAM_CONFIG2);
|
|
|
|
/* find RAM size using SDRAM CS0 only */
|
|
sdram_start(0);
|
|
test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x08000000);
|
|
sdram_start(1);
|
|
test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x08000000);
|
|
if (test1 > test2) {
|
|
sdram_start(0);
|
|
dramsize = test1;
|
|
} else {
|
|
dramsize = test2;
|
|
}
|
|
|
|
/* memory smaller than 1MB is impossible */
|
|
if (dramsize < (1 << 20))
|
|
dramsize = 0;
|
|
|
|
/* set SDRAM CS0 size according to the amount of RAM found */
|
|
if (dramsize > 0) {
|
|
out_be32((void *)MPC5XXX_SDRAM_CS0CFG,
|
|
(0x13 + __builtin_ffs(dramsize >> 20) - 1));
|
|
} else {
|
|
out_be32((void *)MPC5XXX_SDRAM_CS0CFG, 0); /* disabled */
|
|
}
|
|
|
|
/* let SDRAM CS1 start right after CS0 */
|
|
out_be32((void *)MPC5XXX_SDRAM_CS1CFG, dramsize + 0x0000001C);
|
|
|
|
/* find RAM size using SDRAM CS1 only */
|
|
test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize),
|
|
0x08000000);
|
|
dramsize2 = test1;
|
|
|
|
/* memory smaller than 1MB is impossible */
|
|
if (dramsize2 < (1 << 20))
|
|
dramsize2 = 0;
|
|
|
|
/* set SDRAM CS1 size according to the amount of RAM found */
|
|
if (dramsize2 > 0) {
|
|
out_be32((void *)MPC5XXX_SDRAM_CS1CFG, (dramsize |
|
|
(0x13 + __builtin_ffs(dramsize2 >> 20) - 1)));
|
|
} else {
|
|
out_be32((void *)MPC5XXX_SDRAM_CS1CFG, dramsize); /* disabled */
|
|
}
|
|
|
|
#else /* CONFIG_SYS_RAMBOOT */
|
|
|
|
/* retrieve size of memory connected to SDRAM CS0 */
|
|
dramsize = in_be32((void *)MPC5XXX_SDRAM_CS0CFG) & 0xFF;
|
|
if (dramsize >= 0x13)
|
|
dramsize = (1 << (dramsize - 0x13)) << 20;
|
|
else
|
|
dramsize = 0;
|
|
|
|
/* retrieve size of memory connected to SDRAM CS1 */
|
|
dramsize2 = in_be32((void *)MPC5XXX_SDRAM_CS1CFG) & 0xFF;
|
|
if (dramsize2 >= 0x13)
|
|
dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
|
|
else
|
|
dramsize2 = 0;
|
|
|
|
#endif /* CONFIG_SYS_RAMBOOT */
|
|
|
|
/*
|
|
* On MPC5200B we need to set the special configuration delay in the
|
|
* DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
|
|
* Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
|
|
*
|
|
* "The SDelay should be written to a value of 0x00000004. It is
|
|
* required to account for changes caused by normal wafer processing
|
|
* parameters."
|
|
*/
|
|
svr = get_svr();
|
|
pvr = get_pvr();
|
|
if ((SVR_MJREV(svr) >= 2) &&
|
|
(PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4))
|
|
out_be32((void *)MPC5XXX_SDRAM_SDELAY, 0x04);
|
|
|
|
return dramsize + dramsize2;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
char *s = getenv("serial#");
|
|
|
|
puts ("Board: InterControl digsyMTC");
|
|
if (s != NULL) {
|
|
puts(", ");
|
|
puts(s);
|
|
}
|
|
putc('\n');
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
#ifdef CONFIG_MPC52XX_SPI
|
|
struct mpc5xxx_gpt *gpt = (struct mpc5xxx_gpt*)MPC5XXX_GPT;
|
|
#endif
|
|
/*
|
|
* Now, when we are in RAM, enable flash write access for detection
|
|
* process. Note that CS_BOOT cannot be cleared when executing in
|
|
* flash.
|
|
*/
|
|
/* disable CS_BOOT */
|
|
clrbits_be32((void *)MPC5XXX_ADDECR, (1 << 25));
|
|
/* enable CS1 */
|
|
setbits_be32((void *)MPC5XXX_ADDECR, (1 << 17));
|
|
/* enable CS0 */
|
|
setbits_be32((void *)MPC5XXX_ADDECR, (1 << 16));
|
|
|
|
#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
|
|
/* Low level USB init, required for proper kernel operation */
|
|
usb_cpu_init();
|
|
#endif
|
|
#ifdef CONFIG_MPC52XX_SPI
|
|
/* GPT 6 Output Enable */
|
|
out_be32(&gpt[6].emsr, 0x00000034);
|
|
/* GPT 7 Output Enable */
|
|
out_be32(&gpt[7].emsr, 0x00000034);
|
|
#endif
|
|
|
|
return (0);
|
|
}
|
|
|
|
void board_get_enetaddr (uchar * enet)
|
|
{
|
|
ushort read = 0;
|
|
ushort addr_of_eth_addr = 0;
|
|
ushort len_sys = 0;
|
|
ushort len_sys_cfg = 0;
|
|
|
|
/* check identification word */
|
|
eeprom_read(EEPROM_ADDR, EEPROM_ADDR_IDENT, (uchar *)&read, 2);
|
|
if (read != EEPROM_IDENT)
|
|
return;
|
|
|
|
/* calculate offset of config area */
|
|
eeprom_read(EEPROM_ADDR, EEPROM_ADDR_LEN_SYS, (uchar *)&len_sys, 2);
|
|
eeprom_read(EEPROM_ADDR, EEPROM_ADDR_LEN_SYSCFG,
|
|
(uchar *)&len_sys_cfg, 2);
|
|
addr_of_eth_addr = (len_sys + len_sys_cfg + EEPROM_ADDR_ETHADDR) << 1;
|
|
if (addr_of_eth_addr >= EEPROM_LEN)
|
|
return;
|
|
|
|
eeprom_read(EEPROM_ADDR, addr_of_eth_addr, enet, 6);
|
|
}
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
uchar enetaddr[6];
|
|
|
|
if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
|
|
board_get_enetaddr(enetaddr);
|
|
eth_setenv_enetaddr("ethaddr", enetaddr);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PCI
|
|
static struct pci_controller hose;
|
|
|
|
extern void pci_mpc5xxx_init(struct pci_controller *);
|
|
|
|
void pci_init_board(void)
|
|
{
|
|
pci_mpc5xxx_init(&hose);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_CMD_IDE
|
|
|
|
#ifdef CONFIG_IDE_RESET
|
|
|
|
void init_ide_reset(void)
|
|
{
|
|
debug ("init_ide_reset\n");
|
|
|
|
/* set gpio output value to 1 */
|
|
setbits_be32((void *)MPC5XXX_WU_GPIO_DATA_O, (1 << 25));
|
|
/* open drain output */
|
|
setbits_be32((void *)MPC5XXX_WU_GPIO_ODE, (1 << 25));
|
|
/* direction output */
|
|
setbits_be32((void *)MPC5XXX_WU_GPIO_DIR, (1 << 25));
|
|
/* enable gpio */
|
|
setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, (1 << 25));
|
|
|
|
}
|
|
|
|
void ide_set_reset(int idereset)
|
|
{
|
|
debug ("ide_reset(%d)\n", idereset);
|
|
|
|
/* set gpio output value to 0 */
|
|
clrbits_be32((void *)MPC5XXX_WU_GPIO_DATA_O, (1 << 25));
|
|
/* open drain output */
|
|
setbits_be32((void *)MPC5XXX_WU_GPIO_ODE, (1 << 25));
|
|
/* direction output */
|
|
setbits_be32((void *)MPC5XXX_WU_GPIO_DIR, (1 << 25));
|
|
/* enable gpio */
|
|
setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, (1 << 25));
|
|
|
|
udelay(10000);
|
|
|
|
/* set gpio output value to 1 */
|
|
setbits_be32((void *)MPC5XXX_WU_GPIO_DATA_O, (1 << 25));
|
|
/* open drain output */
|
|
setbits_be32((void *)MPC5XXX_WU_GPIO_ODE, (1 << 25));
|
|
/* direction output */
|
|
setbits_be32((void *)MPC5XXX_WU_GPIO_DIR, (1 << 25));
|
|
/* enable gpio */
|
|
setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, (1 << 25));
|
|
}
|
|
#endif /* CONFIG_IDE_RESET */
|
|
|
|
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
|
|
void ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
ft_cpu_setup(blob, bd);
|
|
}
|
|
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
|
|
|
|
#endif /* CONFIG_CMD_IDE */
|
|
|