upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
439 lines
10 KiB
439 lines
10 KiB
/*
|
|
* Copyright 2007,2009 Freescale Semiconductor, Inc.
|
|
*
|
|
* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <pci.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/fsl_pci.h>
|
|
#include <asm/fsl_ddr_sdram.h>
|
|
#include <spd_sdram.h>
|
|
#include <i2c.h>
|
|
#include <ioports.h>
|
|
#include <libfdt.h>
|
|
#include <fdt_support.h>
|
|
|
|
#include "bcsr.h"
|
|
|
|
const qe_iop_conf_t qe_iop_conf_tab[] = {
|
|
/* GETH1 */
|
|
{4, 10, 1, 0, 2}, /* TxD0 */
|
|
{4, 9, 1, 0, 2}, /* TxD1 */
|
|
{4, 8, 1, 0, 2}, /* TxD2 */
|
|
{4, 7, 1, 0, 2}, /* TxD3 */
|
|
{4, 23, 1, 0, 2}, /* TxD4 */
|
|
{4, 22, 1, 0, 2}, /* TxD5 */
|
|
{4, 21, 1, 0, 2}, /* TxD6 */
|
|
{4, 20, 1, 0, 2}, /* TxD7 */
|
|
{4, 15, 2, 0, 2}, /* RxD0 */
|
|
{4, 14, 2, 0, 2}, /* RxD1 */
|
|
{4, 13, 2, 0, 2}, /* RxD2 */
|
|
{4, 12, 2, 0, 2}, /* RxD3 */
|
|
{4, 29, 2, 0, 2}, /* RxD4 */
|
|
{4, 28, 2, 0, 2}, /* RxD5 */
|
|
{4, 27, 2, 0, 2}, /* RxD6 */
|
|
{4, 26, 2, 0, 2}, /* RxD7 */
|
|
{4, 11, 1, 0, 2}, /* TX_EN */
|
|
{4, 24, 1, 0, 2}, /* TX_ER */
|
|
{4, 16, 2, 0, 2}, /* RX_DV */
|
|
{4, 30, 2, 0, 2}, /* RX_ER */
|
|
{4, 17, 2, 0, 2}, /* RX_CLK */
|
|
{4, 19, 1, 0, 2}, /* GTX_CLK */
|
|
{1, 31, 2, 0, 3}, /* GTX125 */
|
|
|
|
/* GETH2 */
|
|
{5, 10, 1, 0, 2}, /* TxD0 */
|
|
{5, 9, 1, 0, 2}, /* TxD1 */
|
|
{5, 8, 1, 0, 2}, /* TxD2 */
|
|
{5, 7, 1, 0, 2}, /* TxD3 */
|
|
{5, 23, 1, 0, 2}, /* TxD4 */
|
|
{5, 22, 1, 0, 2}, /* TxD5 */
|
|
{5, 21, 1, 0, 2}, /* TxD6 */
|
|
{5, 20, 1, 0, 2}, /* TxD7 */
|
|
{5, 15, 2, 0, 2}, /* RxD0 */
|
|
{5, 14, 2, 0, 2}, /* RxD1 */
|
|
{5, 13, 2, 0, 2}, /* RxD2 */
|
|
{5, 12, 2, 0, 2}, /* RxD3 */
|
|
{5, 29, 2, 0, 2}, /* RxD4 */
|
|
{5, 28, 2, 0, 2}, /* RxD5 */
|
|
{5, 27, 2, 0, 3}, /* RxD6 */
|
|
{5, 26, 2, 0, 2}, /* RxD7 */
|
|
{5, 11, 1, 0, 2}, /* TX_EN */
|
|
{5, 24, 1, 0, 2}, /* TX_ER */
|
|
{5, 16, 2, 0, 2}, /* RX_DV */
|
|
{5, 30, 2, 0, 2}, /* RX_ER */
|
|
{5, 17, 2, 0, 2}, /* RX_CLK */
|
|
{5, 19, 1, 0, 2}, /* GTX_CLK */
|
|
{1, 31, 2, 0, 3}, /* GTX125 */
|
|
{4, 6, 3, 0, 2}, /* MDIO */
|
|
{4, 5, 1, 0, 2}, /* MDC */
|
|
|
|
/* UART1 */
|
|
{2, 0, 1, 0, 2}, /* UART_SOUT1 */
|
|
{2, 1, 1, 0, 2}, /* UART_RTS1 */
|
|
{2, 2, 2, 0, 2}, /* UART_CTS1 */
|
|
{2, 3, 2, 0, 2}, /* UART_SIN1 */
|
|
|
|
{0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */
|
|
};
|
|
|
|
void local_bus_init(void);
|
|
void sdram_init(void);
|
|
|
|
int board_early_init_f (void)
|
|
{
|
|
/*
|
|
* Initialize local bus.
|
|
*/
|
|
local_bus_init ();
|
|
|
|
enable_8568mds_duart();
|
|
enable_8568mds_flash_write();
|
|
#if defined(CONFIG_UEC_ETH1) || defined(CONFIG_UEC_ETH2)
|
|
reset_8568mds_uccs();
|
|
#endif
|
|
#if defined(CONFIG_QE) && !defined(CONFIG_eTSEC_MDIO_BUS)
|
|
enable_8568mds_qe_mdio();
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_I2C2_OFFSET
|
|
/* Enable I2C2_SCL and I2C2_SDA */
|
|
volatile struct par_io *port_c;
|
|
port_c = (struct par_io*)(CONFIG_SYS_IMMR + 0xe0140);
|
|
port_c->cpdir2 |= 0x0f000000;
|
|
port_c->cppar2 &= ~0x0f000000;
|
|
port_c->cppar2 |= 0x0a000000;
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard (void)
|
|
{
|
|
printf ("Board: 8568 MDS\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
phys_size_t
|
|
initdram(int board_type)
|
|
{
|
|
long dram_size = 0;
|
|
|
|
puts("Initializing\n");
|
|
|
|
#if defined(CONFIG_DDR_DLL)
|
|
{
|
|
/*
|
|
* Work around to stabilize DDR DLL MSYNC_IN.
|
|
* Errata DDR9 seems to have been fixed.
|
|
* This is now the workaround for Errata DDR11:
|
|
* Override DLL = 1, Course Adj = 1, Tap Select = 0
|
|
*/
|
|
|
|
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
|
|
gur->ddrdllcr = 0x81000000;
|
|
asm("sync;isync;msync");
|
|
udelay(200);
|
|
}
|
|
#endif
|
|
|
|
dram_size = fsl_ddr_sdram();
|
|
dram_size = setup_ddr_tlbs(dram_size / 0x100000);
|
|
dram_size *= 0x100000;
|
|
|
|
/*
|
|
* SDRAM Initialization
|
|
*/
|
|
sdram_init();
|
|
|
|
puts(" DDR: ");
|
|
return dram_size;
|
|
}
|
|
|
|
/*
|
|
* Initialize Local Bus
|
|
*/
|
|
void
|
|
local_bus_init(void)
|
|
{
|
|
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
|
|
|
|
uint clkdiv;
|
|
uint lbc_hz;
|
|
sys_info_t sysinfo;
|
|
|
|
get_sys_info(&sysinfo);
|
|
clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;
|
|
lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
|
|
|
|
gur->lbiuiplldcr1 = 0x00078080;
|
|
if (clkdiv == 16) {
|
|
gur->lbiuiplldcr0 = 0x7c0f1bf0;
|
|
} else if (clkdiv == 8) {
|
|
gur->lbiuiplldcr0 = 0x6c0f1bf0;
|
|
} else if (clkdiv == 4) {
|
|
gur->lbiuiplldcr0 = 0x5c0f1bf0;
|
|
}
|
|
|
|
lbc->lcrr |= 0x00030000;
|
|
|
|
asm("sync;isync;msync");
|
|
}
|
|
|
|
/*
|
|
* Initialize SDRAM memory on the Local Bus.
|
|
*/
|
|
void
|
|
sdram_init(void)
|
|
{
|
|
#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
|
|
|
|
uint idx;
|
|
volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
|
|
uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
|
|
uint lsdmr_common;
|
|
|
|
puts(" SDRAM: ");
|
|
|
|
print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
|
|
|
|
/*
|
|
* Setup SDRAM Base and Option Registers
|
|
*/
|
|
lbc->or2 = CONFIG_SYS_OR2_PRELIM;
|
|
asm("msync");
|
|
|
|
lbc->br2 = CONFIG_SYS_BR2_PRELIM;
|
|
asm("msync");
|
|
|
|
lbc->lbcr = CONFIG_SYS_LBC_LBCR;
|
|
asm("msync");
|
|
|
|
|
|
lbc->lsrt = CONFIG_SYS_LBC_LSRT;
|
|
lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
|
|
asm("msync");
|
|
|
|
/*
|
|
* MPC8568 uses "new" 15-16 style addressing.
|
|
*/
|
|
lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON;
|
|
lsdmr_common |= LSDMR_BSMA1516;
|
|
|
|
/*
|
|
* Issue PRECHARGE ALL command.
|
|
*/
|
|
lbc->lsdmr = lsdmr_common | LSDMR_OP_PCHALL;
|
|
asm("sync;msync");
|
|
*sdram_addr = 0xff;
|
|
ppcDcbf((unsigned long) sdram_addr);
|
|
udelay(100);
|
|
|
|
/*
|
|
* Issue 8 AUTO REFRESH commands.
|
|
*/
|
|
for (idx = 0; idx < 8; idx++) {
|
|
lbc->lsdmr = lsdmr_common | LSDMR_OP_ARFRSH;
|
|
asm("sync;msync");
|
|
*sdram_addr = 0xff;
|
|
ppcDcbf((unsigned long) sdram_addr);
|
|
udelay(100);
|
|
}
|
|
|
|
/*
|
|
* Issue 8 MODE-set command.
|
|
*/
|
|
lbc->lsdmr = lsdmr_common | LSDMR_OP_MRW;
|
|
asm("sync;msync");
|
|
*sdram_addr = 0xff;
|
|
ppcDcbf((unsigned long) sdram_addr);
|
|
udelay(100);
|
|
|
|
/*
|
|
* Issue NORMAL OP command.
|
|
*/
|
|
lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL;
|
|
asm("sync;msync");
|
|
*sdram_addr = 0xff;
|
|
ppcDcbf((unsigned long) sdram_addr);
|
|
udelay(200); /* Overkill. Must wait > 200 bus cycles */
|
|
|
|
#endif /* enable SDRAM init */
|
|
}
|
|
|
|
#if defined(CONFIG_PCI)
|
|
#ifndef CONFIG_PCI_PNP
|
|
static struct pci_config_table pci_mpc8568mds_config_table[] = {
|
|
{
|
|
PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
|
|
pci_cfgfunc_config_device,
|
|
{PCI_ENET0_IOADDR,
|
|
PCI_ENET0_MEMADDR,
|
|
PCI_COMMON_MEMORY | PCI_COMMAND_MASTER}
|
|
},
|
|
{}
|
|
};
|
|
#endif
|
|
|
|
static struct pci_controller pci1_hose = {
|
|
#ifndef CONFIG_PCI_PNP
|
|
config_table: pci_mpc8568mds_config_table,
|
|
#endif
|
|
};
|
|
#endif /* CONFIG_PCI */
|
|
|
|
#ifdef CONFIG_PCIE1
|
|
static struct pci_controller pcie1_hose;
|
|
#endif /* CONFIG_PCIE1 */
|
|
|
|
/*
|
|
* pib_init() -- Initialize the PCA9555 IO expander on the PIB board
|
|
*/
|
|
void
|
|
pib_init(void)
|
|
{
|
|
u8 val8, orig_i2c_bus;
|
|
/*
|
|
* Assign PIB PMC2/3 to PCI bus
|
|
*/
|
|
|
|
/*switch temporarily to I2C bus #2 */
|
|
orig_i2c_bus = i2c_get_bus_num();
|
|
i2c_set_bus_num(1);
|
|
|
|
val8 = 0x00;
|
|
i2c_write(0x23, 0x6, 1, &val8, 1);
|
|
i2c_write(0x23, 0x7, 1, &val8, 1);
|
|
val8 = 0xff;
|
|
i2c_write(0x23, 0x2, 1, &val8, 1);
|
|
i2c_write(0x23, 0x3, 1, &val8, 1);
|
|
|
|
val8 = 0x00;
|
|
i2c_write(0x26, 0x6, 1, &val8, 1);
|
|
val8 = 0x34;
|
|
i2c_write(0x26, 0x7, 1, &val8, 1);
|
|
val8 = 0xf9;
|
|
i2c_write(0x26, 0x2, 1, &val8, 1);
|
|
val8 = 0xff;
|
|
i2c_write(0x26, 0x3, 1, &val8, 1);
|
|
|
|
val8 = 0x00;
|
|
i2c_write(0x27, 0x6, 1, &val8, 1);
|
|
i2c_write(0x27, 0x7, 1, &val8, 1);
|
|
val8 = 0xff;
|
|
i2c_write(0x27, 0x2, 1, &val8, 1);
|
|
val8 = 0xef;
|
|
i2c_write(0x27, 0x3, 1, &val8, 1);
|
|
|
|
asm("eieio");
|
|
}
|
|
|
|
#ifdef CONFIG_PCI
|
|
void pci_init_board(void)
|
|
{
|
|
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
struct fsl_pci_info pci_info[2];
|
|
u32 devdisr, pordevsr, io_sel;
|
|
u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel;
|
|
int first_free_busno = 0;
|
|
int num = 0;
|
|
|
|
int pcie_ep, pcie_configured;
|
|
|
|
devdisr = in_be32(&gur->devdisr);
|
|
pordevsr = in_be32(&gur->pordevsr);
|
|
porpllsr = in_be32(&gur->porpllsr);
|
|
io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
|
|
|
|
debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
|
|
|
|
#ifdef CONFIG_PCI1
|
|
pci_speed = 66666000;
|
|
pci_32 = 1;
|
|
pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
|
|
pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
|
|
|
|
if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
|
|
SET_STD_PCI_INFO(pci_info[num], 1);
|
|
pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
|
|
printf ("\n PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
|
|
(pci_32) ? 32 : 64,
|
|
(pci_speed == 33333000) ? "33" :
|
|
(pci_speed == 66666000) ? "66" : "unknown",
|
|
pci_clk_sel ? "sync" : "async",
|
|
pci_agent ? "agent" : "host",
|
|
pci_arb ? "arbiter" : "external-arbiter",
|
|
pci_info[num].regs);
|
|
|
|
first_free_busno = fsl_pci_init_port(&pci_info[num++],
|
|
&pci1_hose, first_free_busno);
|
|
} else {
|
|
printf (" PCI: disabled\n");
|
|
}
|
|
|
|
puts("\n");
|
|
#else
|
|
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCIE1
|
|
pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
|
|
|
|
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
|
|
SET_STD_PCIE_INFO(pci_info[num], 1);
|
|
pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
|
|
printf (" PCIE1 connected to Slot as %s (base addr %lx)\n",
|
|
pcie_ep ? "Endpoint" : "Root Complex",
|
|
pci_info[num].regs);
|
|
|
|
first_free_busno = fsl_pci_init_port(&pci_info[num++],
|
|
&pcie1_hose, first_free_busno);
|
|
} else {
|
|
printf (" PCIE1: disabled\n");
|
|
}
|
|
|
|
puts("\n");
|
|
#else
|
|
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */
|
|
#endif
|
|
}
|
|
#endif /* CONFIG_PCI */
|
|
|
|
#if defined(CONFIG_OF_BOARD_SETUP)
|
|
void ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
#ifdef CONFIG_PCI1
|
|
ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
|
|
#endif
|
|
#ifdef CONFIG_PCIE1
|
|
ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
|
|
#endif
|
|
}
|
|
#endif
|
|
|