upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
102 lines
2.3 KiB
102 lines
2.3 KiB
/*
|
|
* (C) Copyright 2001-2004
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* (C) Copyright 2002
|
|
* David Mueller, ELSOFT AG, d.mueller@elsoft.ch
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/* This code should work for both the S3C2400 and the S3C2410
|
|
* as they seem to have the same PLL and clock machinery inside.
|
|
* The different address mapping is handled by the s3c24xx.h files below.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#ifdef CONFIG_S3C24X0
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/arch/s3c24x0_cpu.h>
|
|
|
|
#define MPLL 0
|
|
#define UPLL 1
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
/* NOTE: This describes the proper use of this file.
|
|
*
|
|
* CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL.
|
|
*
|
|
* get_FCLK(), get_HCLK(), get_PCLK() and get_UCLK() return the clock of
|
|
* the specified bus in HZ.
|
|
*/
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static ulong get_PLLCLK(int pllreg)
|
|
{
|
|
struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
|
|
ulong r, m, p, s;
|
|
|
|
if (pllreg == MPLL)
|
|
r = readl(&clk_power->mpllcon);
|
|
else if (pllreg == UPLL)
|
|
r = readl(&clk_power->upllcon);
|
|
else
|
|
hang();
|
|
|
|
m = ((r & 0xFF000) >> 12) + 8;
|
|
p = ((r & 0x003F0) >> 4) + 2;
|
|
s = r & 0x3;
|
|
|
|
#if defined(CONFIG_S3C2440)
|
|
if (pllreg == MPLL)
|
|
return 2 * m * (CONFIG_SYS_CLK_FREQ / (p << s));
|
|
#endif
|
|
return (CONFIG_SYS_CLK_FREQ * m) / (p << s);
|
|
|
|
}
|
|
|
|
/* return FCLK frequency */
|
|
ulong get_FCLK(void)
|
|
{
|
|
return get_PLLCLK(MPLL);
|
|
}
|
|
|
|
/* return HCLK frequency */
|
|
ulong get_HCLK(void)
|
|
{
|
|
struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
|
|
#ifdef CONFIG_S3C2440
|
|
switch (readl(&clk_power->clkdivn) & 0x6) {
|
|
default:
|
|
case 0:
|
|
return get_FCLK();
|
|
case 2:
|
|
return get_FCLK() / 2;
|
|
case 4:
|
|
return (readl(&clk_power->camdivn) & (1 << 9)) ?
|
|
get_FCLK() / 8 : get_FCLK() / 4;
|
|
case 6:
|
|
return (readl(&clk_power->camdivn) & (1 << 8)) ?
|
|
get_FCLK() / 6 : get_FCLK() / 3;
|
|
}
|
|
#else
|
|
return (readl(&clk_power->clkdivn) & 2) ? get_FCLK() / 2 : get_FCLK();
|
|
#endif
|
|
}
|
|
|
|
/* return PCLK frequency */
|
|
ulong get_PCLK(void)
|
|
{
|
|
struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
|
|
|
|
return (readl(&clk_power->clkdivn) & 1) ? get_HCLK() / 2 : get_HCLK();
|
|
}
|
|
|
|
/* return UCLK frequency */
|
|
ulong get_UCLK(void)
|
|
{
|
|
return get_PLLCLK(UPLL);
|
|
}
|
|
|
|
#endif /* CONFIG_S3C24X0 */
|
|
|