upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/x86/Kconfig

425 lines
12 KiB

menu "x86 architecture"
depends on X86
config SYS_ARCH
default "x86"
choice
prompt "Mainboard vendor"
default VENDOR_EMULATION
config VENDOR_COREBOOT
bool "coreboot"
config VENDOR_EFI
bool "efi"
config VENDOR_EMULATION
bool "emulation"
config VENDOR_GOOGLE
bool "Google"
config VENDOR_INTEL
bool "Intel"
endchoice
# board-specific options below
source "board/coreboot/Kconfig"
source "board/efi/Kconfig"
source "board/emulation/Kconfig"
source "board/google/Kconfig"
source "board/intel/Kconfig"
# platform-specific options below
source "arch/x86/cpu/baytrail/Kconfig"
source "arch/x86/cpu/coreboot/Kconfig"
source "arch/x86/cpu/ivybridge/Kconfig"
source "arch/x86/cpu/qemu/Kconfig"
source "arch/x86/cpu/quark/Kconfig"
source "arch/x86/cpu/queensbay/Kconfig"
# architecture-specific options below
config SYS_MALLOC_F_LEN
default 0x800
config RAMBASE
hex
default 0x100000
config XIP_ROM_SIZE
hex
depends on X86_RESET_VECTOR
default ROM_SIZE
config CPU_ADDR_BITS
int
default 36
config HPET_ADDRESS
hex
default 0xfed00000 if !HPET_ADDRESS_OVERRIDE
config SMM_TSEG
bool
default n
config SMM_TSEG_SIZE
hex
config X86_RESET_VECTOR
bool
default n
config RESET_SEG_START
hex
depends on X86_RESET_VECTOR
default 0xffff0000
config RESET_SEG_SIZE
hex
depends on X86_RESET_VECTOR
default 0x10000
config RESET_VEC_LOC
hex
depends on X86_RESET_VECTOR
default 0xfffffff0
config SYS_X86_START16
hex
depends on X86_RESET_VECTOR
default 0xfffff800
config BOARD_ROMSIZE_KB_512
bool
config BOARD_ROMSIZE_KB_1024
bool
config BOARD_ROMSIZE_KB_2048
bool
config BOARD_ROMSIZE_KB_4096
bool
config BOARD_ROMSIZE_KB_8192
bool
config BOARD_ROMSIZE_KB_16384
bool
choice
prompt "ROM chip size"
depends on X86_RESET_VECTOR
default UBOOT_ROMSIZE_KB_512 if BOARD_ROMSIZE_KB_512
default UBOOT_ROMSIZE_KB_1024 if BOARD_ROMSIZE_KB_1024
default UBOOT_ROMSIZE_KB_2048 if BOARD_ROMSIZE_KB_2048
default UBOOT_ROMSIZE_KB_4096 if BOARD_ROMSIZE_KB_4096
default UBOOT_ROMSIZE_KB_8192 if BOARD_ROMSIZE_KB_8192
default UBOOT_ROMSIZE_KB_16384 if BOARD_ROMSIZE_KB_16384
help
Select the size of the ROM chip you intend to flash U-Boot on.
The build system will take care of creating a u-boot.rom file
of the matching size.
config UBOOT_ROMSIZE_KB_512
bool "512 KB"
help
Choose this option if you have a 512 KB ROM chip.
config UBOOT_ROMSIZE_KB_1024
bool "1024 KB (1 MB)"
help
Choose this option if you have a 1024 KB (1 MB) ROM chip.
config UBOOT_ROMSIZE_KB_2048
bool "2048 KB (2 MB)"
help
Choose this option if you have a 2048 KB (2 MB) ROM chip.
config UBOOT_ROMSIZE_KB_4096
bool "4096 KB (4 MB)"
help
Choose this option if you have a 4096 KB (4 MB) ROM chip.
config UBOOT_ROMSIZE_KB_8192
bool "8192 KB (8 MB)"
help
Choose this option if you have a 8192 KB (8 MB) ROM chip.
config UBOOT_ROMSIZE_KB_16384
bool "16384 KB (16 MB)"
help
Choose this option if you have a 16384 KB (16 MB) ROM chip.
endchoice
# Map the config names to an integer (KB).
config UBOOT_ROMSIZE_KB
int
default 512 if UBOOT_ROMSIZE_KB_512
default 1024 if UBOOT_ROMSIZE_KB_1024
default 2048 if UBOOT_ROMSIZE_KB_2048
default 4096 if UBOOT_ROMSIZE_KB_4096
default 8192 if UBOOT_ROMSIZE_KB_8192
default 16384 if UBOOT_ROMSIZE_KB_16384
# Map the config names to a hex value (bytes).
config ROM_SIZE
hex
default 0x80000 if UBOOT_ROMSIZE_KB_512
default 0x100000 if UBOOT_ROMSIZE_KB_1024
default 0x200000 if UBOOT_ROMSIZE_KB_2048
default 0x400000 if UBOOT_ROMSIZE_KB_4096
default 0x800000 if UBOOT_ROMSIZE_KB_8192
default 0xc00000 if UBOOT_ROMSIZE_KB_12288
default 0x1000000 if UBOOT_ROMSIZE_KB_16384
config HAVE_INTEL_ME
bool "Platform requires Intel Management Engine"
help
Newer higher-end devices have an Intel Management Engine (ME)
which is a very large binary blob (typically 1.5MB) which is
required for the platform to work. This enforces a particular
SPI flash format. You will need to supply the me.bin file in
your board directory.
config X86_RAMTEST
bool "Perform a simple RAM test after SDRAM initialisation"
help
If there is something wrong with SDRAM then the platform will
often crash within U-Boot or the kernel. This option enables a
very simple RAM test that quickly checks whether the SDRAM seems
to work correctly. It is not exhaustive but can save time by
detecting obvious failures.
config HAVE_FSP
bool "Add an Firmware Support Package binary"
depends on !EFI
help
Select this option to add an Firmware Support Package binary to
the resulting U-Boot image. It is a binary blob which U-Boot uses
to set up SDRAM and other chipset specific initialization.
Note: Without this binary U-Boot will not be able to set up its
SDRAM so will not boot.
config FSP_FILE
string "Firmware Support Package binary filename"
depends on HAVE_FSP
default "fsp.bin"
help
The filename of the file to use as Firmware Support Package binary
in the board directory.
config FSP_ADDR
hex "Firmware Support Package binary location"
depends on HAVE_FSP
default 0xfffc0000
help
FSP is not Position Independent Code (PIC) and the whole FSP has to
be rebased if it is placed at a location which is different from the
perferred base address specified during the FSP build. Use Intel's
Binary Configuration Tool (BCT) to do the rebase.
The default base address of 0xfffc0000 indicates that the binary must
be located at offset 0xc0000 from the beginning of a 1MB flash device.
config FSP_TEMP_RAM_ADDR
hex
depends on HAVE_FSP
default 0x2000000
help
Stack top address which is used in fsp_init() after DRAM is ready and
CAR is disabled.
config FSP_SYS_MALLOC_F_LEN
hex
depends on HAVE_FSP
default 0x100000
help
Additional size of malloc() pool before relocation.
config ENABLE_MRC_CACHE
bool "Enable MRC cache"
depends on !EFI && !SYS_COREBOOT
help
Enable this feature to cause MRC data to be cached in NV storage
to be used for speeding up boot time on future reboots and/or
power cycles.
config SMP
bool "Enable Symmetric Multiprocessing"
default n
help
Enable use of more than one CPU in U-Boot and the Operating System
when loaded. Each CPU will be started up and information can be
obtained using the 'cpu' command. If this option is disabled, then
only one CPU will be enabled regardless of the number of CPUs
available.
config MAX_CPUS
int "Maximum number of CPUs permitted"
depends on SMP
default 4
help
When using multi-CPU chips it is possible for U-Boot to start up
more than one CPU. The stack memory used by all of these CPUs is
pre-allocated so at present U-Boot wants to know the maximum
number of CPUs that may be present. Set this to at least as high
as the number of CPUs in your system (it uses about 4KB of RAM for
each CPU).
config AP_STACK_SIZE
hex
depends on SMP
default 0x1000
help
Each additional CPU started by U-Boot requires its own stack. This
option sets the stack size used by each CPU and directly affects
the memory used by this initialisation process. Typically 4KB is
enough space.
config TSC_CALIBRATION_BYPASS
bool "Bypass Time-Stamp Counter (TSC) calibration"
default n
help
By default U-Boot automatically calibrates Time-Stamp Counter (TSC)
running frequency via Model-Specific Register (MSR) and Programmable
Interval Timer (PIT). If the calibration does not work on your board,
select this option and provide a hardcoded TSC running frequency with
CONFIG_TSC_FREQ_IN_MHZ below.
Normally this option should be turned on in a simulation environment
like qemu.
config TSC_FREQ_IN_MHZ
int "Time-Stamp Counter (TSC) running frequency in MHz"
depends on TSC_CALIBRATION_BYPASS
default 1000
help
The running frequency in MHz of Time-Stamp Counter (TSC).
config HAVE_VGA_BIOS
bool "Add a VGA BIOS image"
help
Select this option if you have a VGA BIOS image that you would
like to add to your ROM.
config VGA_BIOS_FILE
string "VGA BIOS image filename"
depends on HAVE_VGA_BIOS
default "vga.bin"
help
The filename of the VGA BIOS image in the board directory.
config VGA_BIOS_ADDR
hex "VGA BIOS image location"
depends on HAVE_VGA_BIOS
default 0xfff90000
help
The location of VGA BIOS image in the SPI flash. For example, base
address of 0xfff90000 indicates that the image will be put at offset
0x90000 from the beginning of a 1MB flash device.
menu "System tables"
depends on !EFI && !SYS_COREBOOT
config GENERATE_PIRQ_TABLE
bool "Generate a PIRQ table"
default n
help
Generate a PIRQ routing table for this board. The PIRQ routing table
is generated by U-Boot in the system memory from 0xf0000 to 0xfffff
at every 16-byte boundary with a PCI IRQ routing signature ("$PIR").
It specifies the interrupt router information as well how all the PCI
devices' interrupt pins are wired to PIRQs.
config GENERATE_SFI_TABLE
bool "Generate a SFI (Simple Firmware Interface) table"
help
The Simple Firmware Interface (SFI) provides a lightweight method
for platform firmware to pass information to the operating system
via static tables in memory. Kernel SFI support is required to
boot on SFI-only platforms. If you have ACPI tables then these are
used instead.
U-Boot writes this table in write_sfi_table() just before booting
the OS.
For more information, see http://simplefirmware.org
config GENERATE_MP_TABLE
bool "Generate an MP (Multi-Processor) table"
default n
help
Generate an MP (Multi-Processor) table for this board. The MP table
provides a way for the operating system to support for symmetric
multiprocessing as well as symmetric I/O interrupt handling with
the local APIC and I/O APIC.
config GENERATE_ACPI_TABLE
bool "Generate an ACPI (Advanced Configuration and Power Interface) table"
default n
help
The Advanced Configuration and Power Interface (ACPI) specification
provides an open standard for device configuration and management
by the operating system. It defines platform-independent interfaces
for configuration and power management monitoring.
config GENERATE_SMBIOS_TABLE
bool "Generate an SMBIOS (System Management BIOS) table"
default y
help
The System Management BIOS (SMBIOS) specification addresses how
motherboard and system vendors present management information about
their products in a standard format by extending the BIOS interface
on Intel architecture systems.
Check http://www.dmtf.org/standards/smbios for details.
endmenu
config MAX_PIRQ_LINKS
int
default 8
help
This variable specifies the number of PIRQ interrupt links which are
routable. On most older chipsets, this is 4, PIRQA through PIRQD.
Some newer chipsets offer more than four links, commonly up to PIRQH.
config IRQ_SLOT_COUNT
int
default 128
help
U-Boot can support up to 254 IRQ slot info in the PIRQ routing table
which in turns forms a table of exact 4KiB. The default value 128
should be enough for most boards. If this does not fit your board,
change it according to your needs.
config PCIE_ECAM_BASE
hex
default 0xe0000000
help
This is the memory-mapped address of PCI configuration space, which
is only available through the Enhanced Configuration Access
Mechanism (ECAM) with PCI Express. It can be set up almost
anywhere. Before it is set up, it is possible to access PCI
configuration space through I/O access, but memory access is more
convenient. Using this, PCI can be scanned and configured. This
should be set to a region that does not conflict with memory
assigned to PCI devices - i.e. the memory and prefetch regions, as
passed to pci_set_region().
config PCIE_ECAM_SIZE
hex
default 0x10000000
help
This is the size of memory-mapped address of PCI configuration space,
which is only available through the Enhanced Configuration Access
Mechanism (ECAM) with PCI Express. Each bus consumes 1 MiB memory,
so a default 0x10000000 size covers all of the 256 buses which is the
maximum number of PCI buses as defined by the PCI specification.
source "arch/x86/lib/efi/Kconfig"
endmenu