upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/video/ipu.h

268 lines
7.5 KiB

/*
* Porting to u-boot:
*
* (C) Copyright 2010
* Stefano Babic, DENX Software Engineering, sbabic@denx.de
*
* Linux IPU driver for MX51:
*
* (C) Copyright 2005-2010 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __ASM_ARCH_IPU_H__
#define __ASM_ARCH_IPU_H__
#include <linux/types.h>
#include <ipu_pixfmt.h>
#define IDMA_CHAN_INVALID 0xFF
#define HIGH_RESOLUTION_WIDTH 1024
struct clk {
const char *name;
int id;
/* Source clock this clk depends on */
struct clk *parent;
/* Secondary clock to enable/disable with this clock */
struct clk *secondary;
/* Current clock rate */
unsigned long rate;
/* Reference count of clock enable/disable */
__s8 usecount;
/* Register bit position for clock's enable/disable control. */
u8 enable_shift;
/* Register address for clock's enable/disable control. */
void *enable_reg;
u32 flags;
/*
* Function ptr to recalculate the clock's rate based on parent
* clock's rate
*/
void (*recalc) (struct clk *);
/*
* Function ptr to set the clock to a new rate. The rate must match a
* supported rate returned from round_rate. Leave blank if clock is not
* programmable
*/
int (*set_rate) (struct clk *, unsigned long);
/*
* Function ptr to round the requested clock rate to the nearest
* supported rate that is less than or equal to the requested rate.
*/
unsigned long (*round_rate) (struct clk *, unsigned long);
/*
* Function ptr to enable the clock. Leave blank if clock can not
* be gated.
*/
int (*enable) (struct clk *);
/*
* Function ptr to disable the clock. Leave blank if clock can not
* be gated.
*/
void (*disable) (struct clk *);
/* Function ptr to set the parent clock of the clock. */
int (*set_parent) (struct clk *, struct clk *);
};
/*
* Enumeration of Synchronous (Memory-less) panel types
*/
typedef enum {
IPU_PANEL_SHARP_TFT,
IPU_PANEL_TFT,
} ipu_panel_t;
/*
* IPU Driver channels definitions.
* Note these are different from IDMA channels
*/
#define IPU_MAX_CH 32
#define _MAKE_CHAN(num, v_in, g_in, a_in, out) \
((num << 24) | (v_in << 18) | (g_in << 12) | (a_in << 6) | out)
#define _MAKE_ALT_CHAN(ch) (ch | (IPU_MAX_CH << 24))
#define IPU_CHAN_ID(ch) (ch >> 24)
#define IPU_CHAN_ALT(ch) (ch & 0x02000000)
#define IPU_CHAN_ALPHA_IN_DMA(ch) ((uint32_t) (ch >> 6) & 0x3F)
#define IPU_CHAN_GRAPH_IN_DMA(ch) ((uint32_t) (ch >> 12) & 0x3F)
#define IPU_CHAN_VIDEO_IN_DMA(ch) ((uint32_t) (ch >> 18) & 0x3F)
#define IPU_CHAN_OUT_DMA(ch) ((uint32_t) (ch & 0x3F))
#define NO_DMA 0x3F
#define ALT 1
/*
* Enumeration of IPU logical channels. An IPU logical channel is defined as a
* combination of an input (memory to IPU), output (IPU to memory), and/or
* secondary input IDMA channels and in some cases an Image Converter task.
* Some channels consist of only an input or output.
*/
typedef enum {
CHAN_NONE = -1,
MEM_DC_SYNC = _MAKE_CHAN(7, 28, NO_DMA, NO_DMA, NO_DMA),
MEM_DC_ASYNC = _MAKE_CHAN(8, 41, NO_DMA, NO_DMA, NO_DMA),
MEM_BG_SYNC = _MAKE_CHAN(9, 23, NO_DMA, 51, NO_DMA),
MEM_FG_SYNC = _MAKE_CHAN(10, 27, NO_DMA, 31, NO_DMA),
MEM_BG_ASYNC0 = _MAKE_CHAN(11, 24, NO_DMA, 52, NO_DMA),
MEM_FG_ASYNC0 = _MAKE_CHAN(12, 29, NO_DMA, 33, NO_DMA),
MEM_BG_ASYNC1 = _MAKE_ALT_CHAN(MEM_BG_ASYNC0),
MEM_FG_ASYNC1 = _MAKE_ALT_CHAN(MEM_FG_ASYNC0),
DIRECT_ASYNC0 = _MAKE_CHAN(13, NO_DMA, NO_DMA, NO_DMA, NO_DMA),
DIRECT_ASYNC1 = _MAKE_CHAN(14, NO_DMA, NO_DMA, NO_DMA, NO_DMA),
} ipu_channel_t;
/*
* Enumeration of types of buffers for a logical channel.
*/
typedef enum {
IPU_OUTPUT_BUFFER = 0, /*< Buffer for output from IPU */
IPU_ALPHA_IN_BUFFER = 1, /*< Buffer for input to IPU */
IPU_GRAPH_IN_BUFFER = 2, /*< Buffer for input to IPU */
IPU_VIDEO_IN_BUFFER = 3, /*< Buffer for input to IPU */
IPU_INPUT_BUFFER = IPU_VIDEO_IN_BUFFER,
IPU_SEC_INPUT_BUFFER = IPU_GRAPH_IN_BUFFER,
} ipu_buffer_t;
#define IPU_PANEL_SERIAL 1
#define IPU_PANEL_PARALLEL 2
struct ipu_channel {
u8 video_in_dma;
u8 alpha_in_dma;
u8 graph_in_dma;
u8 out_dma;
};
enum ipu_dmfc_type {
DMFC_NORMAL = 0,
DMFC_HIGH_RESOLUTION_DC,
DMFC_HIGH_RESOLUTION_DP,
DMFC_HIGH_RESOLUTION_ONLY_DP,
};
/*
* Union of initialization parameters for a logical channel.
*/
typedef union {
struct {
uint32_t di;
unsigned char interlaced;
} mem_dc_sync;
struct {
uint32_t temp;
} mem_sdc_fg;
struct {
uint32_t di;
unsigned char interlaced;
uint32_t in_pixel_fmt;
uint32_t out_pixel_fmt;
unsigned char alpha_chan_en;
} mem_dp_bg_sync;
struct {
uint32_t temp;
} mem_sdc_bg;
struct {
uint32_t di;
unsigned char interlaced;
uint32_t in_pixel_fmt;
uint32_t out_pixel_fmt;
unsigned char alpha_chan_en;
} mem_dp_fg_sync;
} ipu_channel_params_t;
/*
* Enumeration of IPU interrupts.
*/
enum ipu_irq_line {
IPU_IRQ_DP_SF_END = 448 + 3,
IPU_IRQ_DC_FC_1 = 448 + 9,
};
/*
* Bitfield of Display Interface signal polarities.
*/
typedef struct {
unsigned datamask_en:1;
unsigned ext_clk:1;
unsigned interlaced:1;
unsigned odd_field_first:1;
unsigned clksel_en:1;
unsigned clkidle_en:1;
unsigned data_pol:1; /* true = inverted */
unsigned clk_pol:1; /* true = rising edge */
unsigned enable_pol:1;
unsigned Hsync_pol:1; /* true = active high */
unsigned Vsync_pol:1;
} ipu_di_signal_cfg_t;
typedef enum {
RGB,
YCbCr,
YUV
} ipu_color_space_t;
/* Common IPU API */
int32_t ipu_init_channel(ipu_channel_t channel, ipu_channel_params_t *params);
void ipu_uninit_channel(ipu_channel_t channel);
int32_t ipu_init_channel_buffer(ipu_channel_t channel, ipu_buffer_t type,
uint32_t pixel_fmt,
uint16_t width, uint16_t height,
uint32_t stride,
dma_addr_t phyaddr_0, dma_addr_t phyaddr_1,
uint32_t u_offset, uint32_t v_offset);
int32_t ipu_update_channel_buffer(ipu_channel_t channel, ipu_buffer_t type,
uint32_t bufNum, dma_addr_t phyaddr);
int32_t ipu_is_channel_busy(ipu_channel_t channel);
void ipu_clear_buffer_ready(ipu_channel_t channel, ipu_buffer_t type,
uint32_t bufNum);
int32_t ipu_enable_channel(ipu_channel_t channel);
int32_t ipu_disable_channel(ipu_channel_t channel);
int32_t ipu_init_sync_panel(int disp,
uint32_t pixel_clk,
uint16_t width, uint16_t height,
uint32_t pixel_fmt,
uint16_t h_start_width, uint16_t h_sync_width,
uint16_t h_end_width, uint16_t v_start_width,
uint16_t v_sync_width, uint16_t v_end_width,
uint32_t v_to_h_sync, ipu_di_signal_cfg_t sig);
int32_t ipu_disp_set_global_alpha(ipu_channel_t channel, unsigned char enable,
uint8_t alpha);
int32_t ipu_disp_set_color_key(ipu_channel_t channel, unsigned char enable,
uint32_t colorKey);
uint32_t bytes_per_pixel(uint32_t fmt);
void clk_enable(struct clk *clk);
void clk_disable(struct clk *clk);
u32 clk_get_rate(struct clk *clk);
int clk_set_rate(struct clk *clk, unsigned long rate);
long clk_round_rate(struct clk *clk, unsigned long rate);
int clk_set_parent(struct clk *clk, struct clk *parent);
int clk_get_usecount(struct clk *clk);
struct clk *clk_get_parent(struct clk *clk);
void ipu_dump_registers(void);
int ipu_probe(void);
void ipu_dmfc_init(int dmfc_type, int first);
void ipu_init_dc_mappings(void);
void ipu_dmfc_set_wait4eot(int dma_chan, int width);
void ipu_dc_init(int dc_chan, int di, unsigned char interlaced);
void ipu_dc_uninit(int dc_chan);
void ipu_dp_dc_enable(ipu_channel_t channel);
int ipu_dp_init(ipu_channel_t channel, uint32_t in_pixel_fmt,
uint32_t out_pixel_fmt);
void ipu_dp_uninit(ipu_channel_t channel);
void ipu_dp_dc_disable(ipu_channel_t channel, unsigned char swap);
ipu_color_space_t format_to_colorspace(uint32_t fmt);
#endif