upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
520 lines
13 KiB
520 lines
13 KiB
/*
|
|
* (C) Copyright 2009
|
|
* Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd.eu
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <libfdt.h>
|
|
#include <fdt_support.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <asm/ppc4xx-gpio.h>
|
|
#include <asm/4xx_pci.h>
|
|
#include <command.h>
|
|
#include <malloc.h>
|
|
|
|
/*
|
|
* PMC405-DE cpld registers
|
|
* - all registers are 8 bit
|
|
* - all registers are on 32 bit addesses
|
|
*/
|
|
struct pmc405de_cpld {
|
|
/* cpld design version */
|
|
u8 version;
|
|
u8 reserved0[3];
|
|
|
|
/* misc. status lines */
|
|
u8 status;
|
|
u8 reserved1[3];
|
|
|
|
/*
|
|
* gated control flags
|
|
* gate bit(s) must be written with '1' to
|
|
* access control flag
|
|
*/
|
|
u8 control;
|
|
u8 reserved2[3];
|
|
};
|
|
|
|
#define CPLD_VERSION_MASK 0x0f
|
|
#define CPLD_CONTROL_POSTLED_N 0x01
|
|
#define CPLD_CONTROL_POSTLED_GATE 0x02
|
|
#define CPLD_CONTROL_RESETOUT_N 0x40
|
|
#define CPLD_CONTROL_RESETOUT_N_GATE 0x80
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
extern void __ft_board_setup(void *blob, bd_t *bd);
|
|
extern void pll_write(u32 a, u32 b);
|
|
|
|
static int wait_for_pci_ready_done;
|
|
|
|
static int is_monarch(void);
|
|
static int pci_is_66mhz(void);
|
|
static int board_revision(void);
|
|
static int cpld_revision(void);
|
|
static void upd_plb_pci_div(u32 pllmr0, u32 pllmr1, u32 div);
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
u32 pllmr0, pllmr1;
|
|
|
|
/*
|
|
* check M66EN and patch PLB:PCI divider for 66MHz PCI
|
|
*
|
|
* fCPU==333MHz && fPCI==66MHz (PLBDiv==3 && M66EN==1): PLB/PCI=1
|
|
* fCPU==333MHz && fPCI==33MHz (PLBDiv==3 && M66EN==0): PLB/PCI=2
|
|
* fCPU==133|266MHz && fPCI==66MHz (PLBDiv==1|2 && M66EN==1): PLB/PCI=2
|
|
* fCPU==133|266MHz && fPCI==33MHz (PLBDiv==1|2 && M66EN==0): PLB/PCI=3
|
|
*
|
|
* calling upd_plb_pci_div() may end in calling pll_write() which will
|
|
* do a chip reset and never return.
|
|
*/
|
|
pllmr0 = mfdcr(CPC0_PLLMR0);
|
|
pllmr1 = mfdcr(CPC0_PLLMR1);
|
|
|
|
if ((pllmr0 & PLLMR0_CPU_TO_PLB_MASK) == PLLMR0_CPU_PLB_DIV_3) {
|
|
/* fCPU=333MHz, fPLB=111MHz */
|
|
if (pci_is_66mhz())
|
|
upd_plb_pci_div(pllmr0, pllmr1, PLLMR0_PCI_PLB_DIV_1);
|
|
else
|
|
upd_plb_pci_div(pllmr0, pllmr1, PLLMR0_PCI_PLB_DIV_2);
|
|
} else {
|
|
/* fCPU=133|266MHz, fPLB=133MHz */
|
|
if (pci_is_66mhz())
|
|
upd_plb_pci_div(pllmr0, pllmr1, PLLMR0_PCI_PLB_DIV_2);
|
|
else
|
|
upd_plb_pci_div(pllmr0, pllmr1, PLLMR0_PCI_PLB_DIV_3);
|
|
}
|
|
|
|
/*
|
|
* IRQ 25 (EXT IRQ 0) PCI-INTA#; active low; level sensitive
|
|
* IRQ 26 (EXT IRQ 1) PCI-INTB#; active low; level sensitive
|
|
* IRQ 27 (EXT IRQ 2) PCI-INTC#; active low; level sensitive
|
|
* IRQ 28 (EXT IRQ 3) PCI-INTD#; active low; level sensitive
|
|
* IRQ 29 (EXT IRQ 4) ETH0-PHY-IRQ#; active low; level sensitive
|
|
* IRQ 30 (EXT IRQ 5) ETH1-PHY-IRQ#; active low; level sensitive
|
|
* IRQ 31 (EXT IRQ 6) PLD-IRQ#; active low; level sensitive
|
|
*/
|
|
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
|
|
mtdcr(UIC0ER, 0x00000000); /* disable all ints */
|
|
mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
|
|
mtdcr(UIC0PR, 0xFFFFFF80); /* set int polarities */
|
|
mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
|
|
mtdcr(UIC0VCR, 0x00000001); /* set vect base=0, INT0 highest prio */
|
|
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
|
|
|
|
/*
|
|
* EBC Configuration Register:
|
|
* - set ready timeout to 512 ebc-clks -> ca. 15 us
|
|
* - EBC lines are always driven
|
|
*/
|
|
mtebc(EBC0_CFG, 0xa8400000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void upd_plb_pci_div(u32 pllmr0, u32 pllmr1, u32 div)
|
|
{
|
|
if ((pllmr0 & PLLMR0_PCI_TO_PLB_MASK) != div)
|
|
pll_write((pllmr0 & ~PLLMR0_PCI_TO_PLB_MASK) | div, pllmr1);
|
|
}
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
int i;
|
|
struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
|
|
struct pmc405de_cpld *cpld =
|
|
(struct pmc405de_cpld *)CONFIG_SYS_CPLD_BASE;
|
|
|
|
if (!is_monarch()) {
|
|
/* PCI configuration done: release EREADY */
|
|
setbits_be32(&gpio0->or, CONFIG_SYS_GPIO_EREADY);
|
|
setbits_be32(&gpio0->tcr, CONFIG_SYS_GPIO_EREADY);
|
|
}
|
|
|
|
/* turn off POST LED */
|
|
out_8(&cpld->control,
|
|
CPLD_CONTROL_POSTLED_N | CPLD_CONTROL_POSTLED_GATE);
|
|
|
|
/* turn on LEDs: RUN, A, B */
|
|
clrbits_be32(&gpio0->or,
|
|
CONFIG_SYS_GPIO_LEDRUN_N |
|
|
CONFIG_SYS_GPIO_LEDA_N |
|
|
CONFIG_SYS_GPIO_LEDB_N);
|
|
|
|
for (i=0; i < 200; i++)
|
|
udelay(1000);
|
|
|
|
/* turn off LEDs: A, B */
|
|
setbits_be32(&gpio0->or,
|
|
CONFIG_SYS_GPIO_LEDA_N |
|
|
CONFIG_SYS_GPIO_LEDB_N);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int is_monarch(void)
|
|
{
|
|
struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
|
|
return (in_be32(&gpio0->ir) & CONFIG_SYS_GPIO_MONARCH_N) == 0;
|
|
}
|
|
|
|
static int pci_is_66mhz(void)
|
|
{
|
|
struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
|
|
return (in_be32(&gpio0->ir) & CONFIG_SYS_GPIO_M66EN);
|
|
}
|
|
|
|
static int board_revision(void)
|
|
{
|
|
struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
|
|
return ((in_be32(&gpio0->ir) & CONFIG_SYS_GPIO_HWREV_MASK) >>
|
|
CONFIG_SYS_GPIO_HWREV_SHIFT);
|
|
}
|
|
|
|
static int cpld_revision(void)
|
|
{
|
|
struct pmc405de_cpld *cpld =
|
|
(struct pmc405de_cpld *)CONFIG_SYS_CPLD_BASE;
|
|
return ((in_8(&cpld->version) & CPLD_VERSION_MASK));
|
|
}
|
|
|
|
/*
|
|
* Check Board Identity
|
|
*/
|
|
int checkboard(void)
|
|
{
|
|
puts("Board: esd GmbH - PMC-CPU/405-DE");
|
|
|
|
gd->board_type = board_revision();
|
|
printf(", Rev 1.%ld, ", gd->board_type);
|
|
|
|
if (!is_monarch())
|
|
puts("non-");
|
|
|
|
printf("monarch, PCI=%s MHz, PLD-Rev 1.%d\n",
|
|
pci_is_66mhz() ? "66" : "33", cpld_revision());
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void wait_for_pci_ready(void)
|
|
{
|
|
struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
|
|
int i;
|
|
char *s = getenv("pcidelay");
|
|
|
|
/* only wait once */
|
|
if (wait_for_pci_ready_done)
|
|
return;
|
|
|
|
/*
|
|
* We have our own handling of the pcidelay variable.
|
|
* Using CONFIG_PCI_BOOTDELAY enables pausing for host
|
|
* and adapter devices. For adapter devices we do not
|
|
* want this.
|
|
*/
|
|
if (s) {
|
|
int ms = simple_strtoul(s, NULL, 10);
|
|
printf("PCI: Waiting for %d ms\n", ms);
|
|
for (i=0; i<ms; i++)
|
|
udelay(1000);
|
|
}
|
|
|
|
if (!(in_be32(&gpio0->ir) & CONFIG_SYS_GPIO_EREADY)) {
|
|
printf("PCI: Waiting for EREADY (CTRL-C to skip) ... ");
|
|
while (1) {
|
|
if (ctrlc()) {
|
|
puts("abort\n");
|
|
break;
|
|
}
|
|
if (in_be32(&gpio0->ir) & CONFIG_SYS_GPIO_EREADY) {
|
|
printf("done\n");
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
wait_for_pci_ready_done = 1;
|
|
}
|
|
|
|
/*
|
|
* Overwrite weak is_pci_host()
|
|
*
|
|
* This routine is called to determine if a pci scan should be
|
|
* performed. With various hardware environments (especially cPCI and
|
|
* PPMC) it's insufficient to depend on the state of the arbiter enable
|
|
* bit in the strap register, or generic host/adapter assumptions.
|
|
*
|
|
* Return 0 for adapter mode, non-zero for host (monarch) mode.
|
|
*/
|
|
int is_pci_host(struct pci_controller *hose)
|
|
{
|
|
char *s;
|
|
|
|
if (!is_monarch()) {
|
|
/*
|
|
* Overwrite PCI identification when running in
|
|
* non-monarch mode
|
|
* This should be moved into pci_target_init()
|
|
* when it is sometimes available for 405 CPUs
|
|
*/
|
|
pci_write_config_word(PCIDEVID_405GP,
|
|
PCI_SUBSYSTEM_ID,
|
|
CONFIG_SYS_PCI_SUBSYS_ID_NONMONARCH);
|
|
pci_write_config_word(PCIDEVID_405GP,
|
|
PCI_CLASS_SUB_CODE,
|
|
CONFIG_SYS_PCI_CLASSCODE_NONMONARCH);
|
|
}
|
|
|
|
s = getenv("pciscan");
|
|
if (s == NULL) {
|
|
if (is_monarch()) {
|
|
wait_for_pci_ready();
|
|
return 1;
|
|
} else {
|
|
return 0;
|
|
}
|
|
} else {
|
|
if (!strcmp(s, "yes"))
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Overwrite weak pci_pre_init()
|
|
*
|
|
* The default implementation enables the 405EP
|
|
* internal PCI arbiter. We do not want that
|
|
* on a PMC module.
|
|
*/
|
|
int pci_pre_init(struct pci_controller *hose)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
|
|
void ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
int rc;
|
|
|
|
__ft_board_setup(blob, bd);
|
|
|
|
/*
|
|
* Disable PCI in non-monarch mode.
|
|
*/
|
|
if (!is_monarch()) {
|
|
rc = fdt_find_and_setprop(blob, "/plb/pci@ec000000", "status",
|
|
"disabled", sizeof("disabled"), 1);
|
|
if (rc) {
|
|
printf("Unable to update property status in PCI node, "
|
|
"err=%s\n",
|
|
fdt_strerror(rc));
|
|
}
|
|
}
|
|
}
|
|
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
|
|
|
|
#if defined(CONFIG_SYS_EEPROM_WREN)
|
|
/* Input: <dev_addr> I2C address of EEPROM device to enable.
|
|
* <state> -1: deliver current state
|
|
* 0: disable write
|
|
* 1: enable write
|
|
* Returns: -1: wrong device address
|
|
* 0: dis-/en- able done
|
|
* 0/1: current state if <state> was -1.
|
|
*/
|
|
int eeprom_write_enable(unsigned dev_addr, int state)
|
|
{
|
|
struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
|
|
|
|
if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
|
|
return -1;
|
|
} else {
|
|
switch (state) {
|
|
case 1:
|
|
/* Enable write access, clear bit GPIO0. */
|
|
clrbits_be32(&gpio0->or, CONFIG_SYS_GPIO_EEPROM_WP);
|
|
state = 0;
|
|
break;
|
|
case 0:
|
|
/* Disable write access, set bit GPIO0. */
|
|
setbits_be32(&gpio0->or, CONFIG_SYS_GPIO_EEPROM_WP);
|
|
state = 0;
|
|
break;
|
|
default:
|
|
/* Read current status back. */
|
|
state = (0 == (in_be32(&gpio0->or) &
|
|
CONFIG_SYS_GPIO_EEPROM_WP));
|
|
break;
|
|
}
|
|
}
|
|
return state;
|
|
}
|
|
|
|
int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
int query = argc == 1;
|
|
int state = 0;
|
|
|
|
if (query) {
|
|
/* Query write access state. */
|
|
state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, - 1);
|
|
if (state < 0) {
|
|
puts("Query of write access state failed.\n");
|
|
} else {
|
|
printf("Write access for device 0x%0x is %sabled.\n",
|
|
CONFIG_SYS_I2C_EEPROM_ADDR,
|
|
state ? "en" : "dis");
|
|
state = 0;
|
|
}
|
|
} else {
|
|
if ('0' == argv[1][0]) {
|
|
/* Disable write access. */
|
|
state = eeprom_write_enable(
|
|
CONFIG_SYS_I2C_EEPROM_ADDR, 0);
|
|
} else {
|
|
/* Enable write access. */
|
|
state = eeprom_write_enable(
|
|
CONFIG_SYS_I2C_EEPROM_ADDR, 1);
|
|
}
|
|
if (state < 0)
|
|
puts ("Setup of write access state failed.\n");
|
|
}
|
|
|
|
return state;
|
|
}
|
|
|
|
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
|
|
"Enable / disable / query EEPROM write access",
|
|
""
|
|
);
|
|
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
|
|
|
|
#if defined(CONFIG_PRAM)
|
|
#include <environment.h>
|
|
|
|
int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
u32 pram, nextbase, base;
|
|
char *v;
|
|
u32 param;
|
|
ulong *lptr;
|
|
|
|
v = getenv("pram");
|
|
if (v)
|
|
pram = simple_strtoul(v, NULL, 10);
|
|
else {
|
|
printf("Error: pram undefined. Please define pram in KiB\n");
|
|
return 1;
|
|
}
|
|
|
|
base = gd->bd->bi_memsize;
|
|
#if defined(CONFIG_LOGBUFFER)
|
|
base -= LOGBUFF_LEN + LOGBUFF_OVERHEAD;
|
|
#endif
|
|
/*
|
|
* gd->bd->bi_memsize == physical ram size - CONFIG_SYS_MM_TOP_HIDE
|
|
*/
|
|
param = base - (pram << 10);
|
|
printf("PARAM: @%08x\n", param);
|
|
debug("memsize=0x%08x, base=0x%08x\n", (u32)gd->bd->bi_memsize, base);
|
|
|
|
/* clear entire PA ram */
|
|
memset((void*)param, 0, (pram << 10));
|
|
|
|
/* reserve 4k for pointer field */
|
|
nextbase = base - 4096;
|
|
lptr = (ulong*)(base);
|
|
|
|
/*
|
|
* *(--lptr) = item_size;
|
|
* *(--lptr) = base - item_base = distance from field top;
|
|
*/
|
|
|
|
/* env is first (4k aligned) */
|
|
nextbase -= ((CONFIG_ENV_SIZE + 4096 - 1) & ~(4096 - 1));
|
|
memcpy((void*)nextbase, env_ptr, CONFIG_ENV_SIZE);
|
|
*(--lptr) = CONFIG_ENV_SIZE; /* size */
|
|
*(--lptr) = base - nextbase; /* offset | type=0 */
|
|
|
|
/* free section */
|
|
*(--lptr) = nextbase - param; /* size */
|
|
*(--lptr) = (base - param) | 126; /* offset | type=126 */
|
|
|
|
/* terminate pointer field */
|
|
*(--lptr) = crc32(0, (void*)(base - 0x10), 0x10);
|
|
*(--lptr) = 0; /* offset=0 -> terminator */
|
|
return 0;
|
|
}
|
|
U_BOOT_CMD(
|
|
painit, 1, 1, do_painit,
|
|
"prepare PciAccess system",
|
|
""
|
|
);
|
|
#endif /* CONFIG_PRAM */
|
|
|
|
int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
|
|
setbits_be32(&gpio0->tcr, CONFIG_SYS_GPIO_SELFRST_N);
|
|
return 0;
|
|
}
|
|
U_BOOT_CMD(
|
|
selfreset, 1, 1, do_selfreset,
|
|
"assert self-reset# signal",
|
|
""
|
|
);
|
|
|
|
int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
struct pmc405de_cpld *cpld =
|
|
(struct pmc405de_cpld *)CONFIG_SYS_CPLD_BASE;
|
|
|
|
if (argc > 1) {
|
|
if (argv[1][0] == '0') {
|
|
/* assert */
|
|
printf("PMC-RESETOUT# asserted\n");
|
|
out_8(&cpld->control,
|
|
CPLD_CONTROL_RESETOUT_N_GATE);
|
|
} else {
|
|
/* deassert */
|
|
printf("PMC-RESETOUT# deasserted\n");
|
|
out_8(&cpld->control,
|
|
CPLD_CONTROL_RESETOUT_N |
|
|
CPLD_CONTROL_RESETOUT_N_GATE);
|
|
}
|
|
} else {
|
|
printf("PMC-RESETOUT# is %s\n",
|
|
(in_8(&cpld->control) & CPLD_CONTROL_RESETOUT_N) ?
|
|
"inactive" : "active");
|
|
}
|
|
return 0;
|
|
}
|
|
U_BOOT_CMD(
|
|
resetout, 2, 1, do_resetout,
|
|
"assert PMC-RESETOUT# signal",
|
|
""
|
|
);
|
|
|