upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
400 lines
9.1 KiB
400 lines
9.1 KiB
/*
|
|
* Copyright 2015 Hans de Goede <hdegoede@redhat.com>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "sun4i-a10.dtsi"
|
|
#include "sunxi-common-regulators.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/pinctrl/sun4i-a10.h>
|
|
|
|
/ {
|
|
model = "iNet-9F Rev 03";
|
|
compatible = "inet-tek,inet9f-rev03", "allwinner,sun4i-a10";
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
gpio_keys {
|
|
compatible = "gpio-keys-polled";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&key_pins_inet9f>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
poll-interval = <20>;
|
|
|
|
button@0 {
|
|
label = "Left Joystick Left";
|
|
linux,code = <ABS_X>;
|
|
linux,input-type = <EV_ABS>;
|
|
linux,input-value = <0xffffffff>; /* -1 */
|
|
gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */
|
|
};
|
|
|
|
button@1 {
|
|
label = "Left Joystick Right";
|
|
linux,code = <ABS_X>;
|
|
linux,input-type = <EV_ABS>;
|
|
linux,input-value = <1>;
|
|
gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */
|
|
};
|
|
|
|
button@2 {
|
|
label = "Left Joystick Up";
|
|
linux,code = <ABS_Y>;
|
|
linux,input-type = <EV_ABS>;
|
|
linux,input-value = <0xffffffff>; /* -1 */
|
|
gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
|
|
};
|
|
|
|
button@3 {
|
|
label = "Left Joystick Down";
|
|
linux,code = <ABS_Y>;
|
|
linux,input-type = <EV_ABS>;
|
|
linux,input-value = <1>;
|
|
gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
|
|
};
|
|
|
|
button@4 {
|
|
label = "Right Joystick Left";
|
|
linux,code = <ABS_Z>;
|
|
linux,input-type = <EV_ABS>;
|
|
linux,input-value = <0xffffffff>; /* -1 */
|
|
gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */
|
|
};
|
|
|
|
button@5 {
|
|
label = "Right Joystick Right";
|
|
linux,code = <ABS_Z>;
|
|
linux,input-type = <EV_ABS>;
|
|
linux,input-value = <1>;
|
|
gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */
|
|
};
|
|
|
|
button@6 {
|
|
label = "Right Joystick Up";
|
|
linux,code = <ABS_RZ>;
|
|
linux,input-type = <EV_ABS>;
|
|
linux,input-value = <0xffffffff>; /* -1 */
|
|
gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */
|
|
};
|
|
|
|
button@7 {
|
|
label = "Right Joystick Down";
|
|
linux,code = <ABS_RZ>;
|
|
linux,input-type = <EV_ABS>;
|
|
linux,input-value = <1>;
|
|
gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
|
|
};
|
|
|
|
button@8 {
|
|
label = "DPad Left";
|
|
linux,code = <ABS_HAT0X>;
|
|
linux,input-type = <EV_ABS>;
|
|
linux,input-value = <0xffffffff>; /* -1 */
|
|
gpios = <&pio 7 23 GPIO_ACTIVE_LOW>; /* PH23 */
|
|
};
|
|
|
|
button@9 {
|
|
label = "DPad Right";
|
|
linux,code = <ABS_HAT0X>;
|
|
linux,input-type = <EV_ABS>;
|
|
linux,input-value = <1>;
|
|
gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */
|
|
};
|
|
|
|
button@10 {
|
|
label = "DPad Up";
|
|
linux,code = <ABS_HAT0Y>;
|
|
linux,input-type = <EV_ABS>;
|
|
linux,input-value = <0xffffffff>; /* -1 */
|
|
gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */
|
|
};
|
|
|
|
button@11 {
|
|
label = "DPad Down";
|
|
linux,code = <ABS_HAT0Y>;
|
|
linux,input-type = <EV_ABS>;
|
|
linux,input-value = <1>;
|
|
gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */
|
|
};
|
|
|
|
button@12 {
|
|
label = "Button X";
|
|
linux,code = <BTN_X>;
|
|
gpios = <&pio 0 16 GPIO_ACTIVE_LOW>; /* PA16 */
|
|
};
|
|
|
|
button@13 {
|
|
label = "Button Y";
|
|
linux,code = <BTN_Y>;
|
|
gpios = <&pio 0 14 GPIO_ACTIVE_LOW>; /* PA14 */
|
|
};
|
|
|
|
button@14 {
|
|
label = "Button A";
|
|
linux,code = <BTN_A>;
|
|
gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
|
|
};
|
|
|
|
button@15 {
|
|
label = "Button B";
|
|
linux,code = <BTN_B>;
|
|
gpios = <&pio 0 15 GPIO_ACTIVE_LOW>; /* PA15 */
|
|
};
|
|
|
|
button@16 {
|
|
label = "Select Button";
|
|
linux,code = <BTN_SELECT>;
|
|
gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */
|
|
};
|
|
|
|
button@17 {
|
|
label = "Start Button";
|
|
linux,code = <BTN_START>;
|
|
gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */
|
|
};
|
|
|
|
button@18 {
|
|
label = "Top Left Button";
|
|
linux,code = <BTN_TL>;
|
|
gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
|
|
};
|
|
|
|
button@19 {
|
|
label = "Top Right Button";
|
|
linux,code = <BTN_TR>;
|
|
gpios = <&pio 0 13 GPIO_ACTIVE_LOW>; /* PA13 */
|
|
};
|
|
};
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu-supply = <®_dcdc2>;
|
|
};
|
|
|
|
&ehci1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins_a>;
|
|
status = "okay";
|
|
|
|
axp209: pmic@34 {
|
|
reg = <0x34>;
|
|
interrupts = <0>;
|
|
};
|
|
};
|
|
|
|
#include "axp209.dtsi"
|
|
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins_a>;
|
|
status = "okay";
|
|
|
|
/* Accelerometer */
|
|
bma250@18 {
|
|
compatible = "bosch,bma250";
|
|
reg = <0x18>;
|
|
interrupt-parent = <&pio>;
|
|
interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c2_pins_a>;
|
|
status = "okay";
|
|
|
|
ft5406ee8: touchscreen@38 {
|
|
compatible = "edt,edt-ft5406";
|
|
reg = <0x38>;
|
|
interrupt-parent = <&pio>;
|
|
interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
|
|
touchscreen-size-x = <800>;
|
|
touchscreen-size-y = <480>;
|
|
};
|
|
};
|
|
|
|
&lradc {
|
|
vref-supply = <®_ldo2>;
|
|
status = "okay";
|
|
|
|
button@200 {
|
|
label = "Menu";
|
|
linux,code = <KEY_MENU>;
|
|
channel = <0>;
|
|
voltage = <200000>;
|
|
};
|
|
|
|
button@600 {
|
|
label = "Volume Up";
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
channel = <0>;
|
|
voltage = <600000>;
|
|
};
|
|
|
|
button@800 {
|
|
label = "Volume Down";
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
channel = <0>;
|
|
voltage = <800000>;
|
|
};
|
|
|
|
button@1000 {
|
|
label = "Home";
|
|
linux,code = <KEY_HOMEPAGE>;
|
|
channel = <0>;
|
|
voltage = <1000000>;
|
|
};
|
|
|
|
button@1200 {
|
|
label = "Esc";
|
|
linux,code = <KEY_ESC>;
|
|
channel = <0>;
|
|
voltage = <1200000>;
|
|
};
|
|
};
|
|
|
|
&mmc0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
|
|
vmmc-supply = <®_vcc3v3>;
|
|
bus-width = <4>;
|
|
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
|
|
cd-inverted;
|
|
status = "okay";
|
|
};
|
|
|
|
&otg_sram {
|
|
status = "okay";
|
|
};
|
|
|
|
&pio {
|
|
key_pins_inet9f: key_pins@0 {
|
|
allwinner,pins = "PA0", "PA1", "PA3", "PA4",
|
|
"PA5", "PA6", "PA8", "PA9",
|
|
"PA11", "PA12", "PA13",
|
|
"PA14", "PA15", "PA16", "PA17",
|
|
"PH22", "PH23", "PH24", "PH25", "PH26";
|
|
allwinner,function = "gpio_in";
|
|
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
|
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
|
|
};
|
|
|
|
usb0_id_detect_pin: usb0_id_detect_pin@0 {
|
|
allwinner,pins = "PH4";
|
|
allwinner,function = "gpio_in";
|
|
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
|
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
|
|
};
|
|
|
|
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
|
|
allwinner,pins = "PH5";
|
|
allwinner,function = "gpio_in";
|
|
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
|
allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
|
|
};
|
|
};
|
|
|
|
®_dcdc2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-name = "vdd-cpu";
|
|
};
|
|
|
|
®_dcdc3 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1250000>;
|
|
regulator-max-microvolt = <1250000>;
|
|
regulator-name = "vdd-int-dll";
|
|
};
|
|
|
|
®_ldo1 {
|
|
regulator-name = "vdd-rtc";
|
|
};
|
|
|
|
®_ldo2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-name = "avcc";
|
|
};
|
|
|
|
®_usb0_vbus {
|
|
status = "okay";
|
|
};
|
|
|
|
®_usb2_vbus {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pins_a>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_otg {
|
|
dr_mode = "otg";
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphy {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
|
|
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
|
|
usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
|
|
usb0_vbus-supply = <®_usb0_vbus>;
|
|
usb2_vbus-supply = <®_usb2_vbus>;
|
|
status = "okay";
|
|
};
|
|
|