upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/gpio/pm8916_gpio.c

303 lines
7.5 KiB

/*
* Qualcomm pm8916 pmic gpio driver - part of Qualcomm PM8916 PMIC
*
* (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <dm.h>
#include <power/pmic.h>
#include <spmi/spmi.h>
#include <asm/io.h>
#include <asm/gpio.h>
#include <linux/bitops.h>
DECLARE_GLOBAL_DATA_PTR;
/* Register offset for each gpio */
#define REG_OFFSET(x) ((x) * 0x100)
/* Register maps */
/* Type and subtype are shared for all pm8916 peripherals */
#define REG_TYPE 0x4
#define REG_SUBTYPE 0x5
#define REG_STATUS 0x08
#define REG_STATUS_VAL_MASK 0x1
/* MODE_CTL */
#define REG_CTL 0x40
#define REG_CTL_MODE_MASK 0x70
#define REG_CTL_MODE_INPUT 0x00
#define REG_CTL_MODE_INOUT 0x20
#define REG_CTL_MODE_OUTPUT 0x10
#define REG_CTL_OUTPUT_MASK 0x0F
#define REG_DIG_VIN_CTL 0x41
#define REG_DIG_VIN_VIN0 0
#define REG_DIG_PULL_CTL 0x42
#define REG_DIG_PULL_NO_PU 0x5
#define REG_DIG_OUT_CTL 0x45
#define REG_DIG_OUT_CTL_CMOS (0x0 << 4)
#define REG_DIG_OUT_CTL_DRIVE_L 0x1
#define REG_EN_CTL 0x46
#define REG_EN_CTL_ENABLE (1 << 7)
struct pm8916_gpio_bank {
uint32_t pid; /* Peripheral ID on SPMI bus */
};
static int pm8916_gpio_set_direction(struct udevice *dev, unsigned offset,
bool input, int value)
{
struct pm8916_gpio_bank *priv = dev_get_priv(dev);
uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
int ret;
/* Disable the GPIO */
ret = pmic_clrsetbits(dev->parent, gpio_base + REG_EN_CTL,
REG_EN_CTL_ENABLE, 0);
if (ret < 0)
return ret;
/* Select the mode */
if (input)
ret = pmic_reg_write(dev->parent, gpio_base + REG_CTL,
REG_CTL_MODE_INPUT);
else
ret = pmic_reg_write(dev->parent, gpio_base + REG_CTL,
REG_CTL_MODE_INOUT | (value ? 1 : 0));
if (ret < 0)
return ret;
/* Set the right pull (no pull) */
ret = pmic_reg_write(dev->parent, gpio_base + REG_DIG_PULL_CTL,
REG_DIG_PULL_NO_PU);
if (ret < 0)
return ret;
/* Configure output pin drivers if needed */
if (!input) {
/* Select the VIN - VIN0, pin is input so it doesn't matter */
ret = pmic_reg_write(dev->parent, gpio_base + REG_DIG_VIN_CTL,
REG_DIG_VIN_VIN0);
if (ret < 0)
return ret;
/* Set the right dig out control */
ret = pmic_reg_write(dev->parent, gpio_base + REG_DIG_OUT_CTL,
REG_DIG_OUT_CTL_CMOS |
REG_DIG_OUT_CTL_DRIVE_L);
if (ret < 0)
return ret;
}
/* Enable the GPIO */
return pmic_clrsetbits(dev->parent, gpio_base + REG_EN_CTL, 0,
REG_EN_CTL_ENABLE);
}
static int pm8916_gpio_direction_input(struct udevice *dev, unsigned offset)
{
return pm8916_gpio_set_direction(dev, offset, true, 0);
}
static int pm8916_gpio_direction_output(struct udevice *dev, unsigned offset,
int value)
{
return pm8916_gpio_set_direction(dev, offset, false, value);
}
static int pm8916_gpio_get_function(struct udevice *dev, unsigned offset)
{
struct pm8916_gpio_bank *priv = dev_get_priv(dev);
uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
int reg;
/* Set the output value of the gpio */
reg = pmic_reg_read(dev->parent, gpio_base + REG_CTL);
if (reg < 0)
return reg;
switch (reg & REG_CTL_MODE_MASK) {
case REG_CTL_MODE_INPUT:
return GPIOF_INPUT;
case REG_CTL_MODE_INOUT: /* Fallthrough */
case REG_CTL_MODE_OUTPUT:
return GPIOF_OUTPUT;
default:
return GPIOF_UNKNOWN;
}
}
static int pm8916_gpio_get_value(struct udevice *dev, unsigned offset)
{
struct pm8916_gpio_bank *priv = dev_get_priv(dev);
uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
int reg;
reg = pmic_reg_read(dev->parent, gpio_base + REG_STATUS);
if (reg < 0)
return reg;
return !!(reg & REG_STATUS_VAL_MASK);
}
static int pm8916_gpio_set_value(struct udevice *dev, unsigned offset,
int value)
{
struct pm8916_gpio_bank *priv = dev_get_priv(dev);
uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
/* Set the output value of the gpio */
return pmic_clrsetbits(dev->parent, gpio_base + REG_CTL,
REG_CTL_OUTPUT_MASK, !!value);
}
static const struct dm_gpio_ops pm8916_gpio_ops = {
.direction_input = pm8916_gpio_direction_input,
.direction_output = pm8916_gpio_direction_output,
.get_value = pm8916_gpio_get_value,
.set_value = pm8916_gpio_set_value,
.get_function = pm8916_gpio_get_function,
};
static int pm8916_gpio_probe(struct udevice *dev)
{
struct pm8916_gpio_bank *priv = dev_get_priv(dev);
int reg;
priv->pid = dev_read_addr(dev);
if (priv->pid == FDT_ADDR_T_NONE)
return -EINVAL;
/* Do a sanity check */
reg = pmic_reg_read(dev->parent, priv->pid + REG_TYPE);
if (reg != 0x10)
return -ENODEV;
reg = pmic_reg_read(dev->parent, priv->pid + REG_SUBTYPE);
if (reg != 0x5 && reg != 0x1)
return -ENODEV;
return 0;
}
static int pm8916_gpio_ofdata_to_platdata(struct udevice *dev)
{
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
uc_priv->gpio_count = dev_read_u32_default(dev, "gpio-count", 0);
uc_priv->bank_name = dev_read_string(dev, "gpio-bank-name");
if (uc_priv->bank_name == NULL)
uc_priv->bank_name = "pm8916";
return 0;
}
static const struct udevice_id pm8916_gpio_ids[] = {
{ .compatible = "qcom,pm8916-gpio" },
{ .compatible = "qcom,pm8994-gpio" }, /* 22 GPIO's */
{ }
};
U_BOOT_DRIVER(gpio_pm8916) = {
.name = "gpio_pm8916",
.id = UCLASS_GPIO,
.of_match = pm8916_gpio_ids,
.ofdata_to_platdata = pm8916_gpio_ofdata_to_platdata,
.probe = pm8916_gpio_probe,
.ops = &pm8916_gpio_ops,
.priv_auto_alloc_size = sizeof(struct pm8916_gpio_bank),
};
/* Add pmic buttons as GPIO as well - there is no generic way for now */
#define PON_INT_RT_STS 0x10
#define KPDPWR_ON_INT_BIT 0
#define RESIN_ON_INT_BIT 1
static int pm8941_pwrkey_get_function(struct udevice *dev, unsigned offset)
{
return GPIOF_INPUT;
}
static int pm8941_pwrkey_get_value(struct udevice *dev, unsigned offset)
{
struct pm8916_gpio_bank *priv = dev_get_priv(dev);
int reg = pmic_reg_read(dev->parent, priv->pid + PON_INT_RT_STS);
if (reg < 0)
return 0;
switch (offset) {
case 0: /* Power button */
return (reg & BIT(KPDPWR_ON_INT_BIT)) != 0;
break;
case 1: /* Reset button */
default:
return (reg & BIT(RESIN_ON_INT_BIT)) != 0;
break;
}
}
static const struct dm_gpio_ops pm8941_pwrkey_ops = {
.get_value = pm8941_pwrkey_get_value,
.get_function = pm8941_pwrkey_get_function,
};
static int pm8941_pwrkey_probe(struct udevice *dev)
{
struct pm8916_gpio_bank *priv = dev_get_priv(dev);
int reg;
priv->pid = devfdt_get_addr(dev);
if (priv->pid == FDT_ADDR_T_NONE)
return -EINVAL;
/* Do a sanity check */
reg = pmic_reg_read(dev->parent, priv->pid + REG_TYPE);
if (reg != 0x1)
return -ENODEV;
reg = pmic_reg_read(dev->parent, priv->pid + REG_SUBTYPE);
if (reg != 0x1)
return -ENODEV;
return 0;
}
static int pm8941_pwrkey_ofdata_to_platdata(struct udevice *dev)
{
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
uc_priv->gpio_count = 2;
uc_priv->bank_name = dev_read_string(dev, "gpio-bank-name");
if (uc_priv->bank_name == NULL)
uc_priv->bank_name = "pm8916_key";
return 0;
}
static const struct udevice_id pm8941_pwrkey_ids[] = {
{ .compatible = "qcom,pm8916-pwrkey" },
{ .compatible = "qcom,pm8994-pwrkey" },
{ }
};
U_BOOT_DRIVER(pwrkey_pm8941) = {
.name = "pwrkey_pm8916",
.id = UCLASS_GPIO,
.of_match = pm8941_pwrkey_ids,
.ofdata_to_platdata = pm8941_pwrkey_ofdata_to_platdata,
.probe = pm8941_pwrkey_probe,
.ops = &pm8941_pwrkey_ops,
.priv_auto_alloc_size = sizeof(struct pm8916_gpio_bank),
};