upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
203 lines
6.7 KiB
203 lines
6.7 KiB
/*
|
|
* (C) Copyright 2004
|
|
* DAVE Srl
|
|
*
|
|
* http://www.dave-tech.it
|
|
* http://www.wawnet.biz
|
|
* mailto:info@wawnet.biz
|
|
*
|
|
* Configuation settings for the B2 board.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
#define CONFIG_ARM7 1 /* This is a ARM7 CPU */
|
|
#define CONFIG_B2 1 /* on an B2 Board */
|
|
#define CONFIG_ARM_THUMB 1 /* this is an ARM7TDMI */
|
|
#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */
|
|
|
|
#define CONFIG_S3C44B0_CLOCK_SPEED 75 /* we have a 75Mhz S3C44B0*/
|
|
|
|
|
|
#undef CONFIG_USE_IRQ /* don't need them anymore */
|
|
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
|
|
#define CFG_ENV_SIZE 1024 /* 1024 bytes may be used for env vars*/
|
|
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024 )
|
|
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
#define CONFIG_DRIVER_LAN91C96
|
|
#define CONFIG_LAN91C96_BASE 0x04000300 /* base address */
|
|
#define CONFIG_SMC_USE_32_BIT
|
|
#undef CONFIG_SHOW_ACTIVITY
|
|
#define CONFIG_NET_RETRY_COUNT 10 /* # of retries */
|
|
|
|
/*
|
|
* select serial console configuration
|
|
*/
|
|
#define CONFIG_SERIAL1 1 /* we use Serial line 1 */
|
|
|
|
/* allow to overwrite serial and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
|
|
|
|
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
|
|
CFG_CMD_DATE | \
|
|
CFG_CMD_ELF | \
|
|
CFG_CMD_EEPROM | \
|
|
CFG_CMD_I2C )
|
|
|
|
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
|
|
#include <cmd_confdefs.h>
|
|
|
|
#define CONFIG_BOOTDELAY 5
|
|
#define CONFIG_ETHADDR 00:50:c2:1e:af:fb
|
|
#define CONFIG_BOOTARGS "setenv bootargs root=/dev/ram ip=192.168.0.70:::::eth0:off \
|
|
ether=25,0,0,0,eth0 ethaddr=00:50:c2:1e:af:fb"
|
|
#define CONFIG_NETMASK 255.255.0.0
|
|
#define CONFIG_IPADDR 192.168.0.70
|
|
#define CONFIG_SERVERIP 192.168.0.23
|
|
#define CONFIG_BOOTFILE "B2-rootfs/usr/B2-zImage.u-boot"
|
|
#define CONFIG_BOOTCOMMAND "bootm 20000 f0000"
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CFG_LONGHELP /* undef to save memory */
|
|
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CFG_MEMTEST_START 0x0C400000 /* memtest works on */
|
|
#define CFG_MEMTEST_END 0x0C800000 /* 4 ... 8 MB in DRAM */
|
|
|
|
#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
|
|
|
|
#define CFG_LOAD_ADDR 0x0c700000 /* default load address */
|
|
|
|
#define CFG_HZ 1000 /* 1 kHz */
|
|
|
|
/* valid baudrates */
|
|
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Stack sizes
|
|
*
|
|
* The stack sizes are set up in start.S using the settings below
|
|
*/
|
|
#define CONFIG_STACKSIZE (128*1024) /* regular stack */
|
|
#ifdef CONFIG_USE_IRQ
|
|
#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
|
|
#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Physical Memory Map
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 banks of DRAM */
|
|
#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
|
|
#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */
|
|
|
|
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
|
|
#define PHYS_FLASH_SIZE 0x00400000 /* 4 MB */
|
|
|
|
#define CFG_FLASH_BASE PHYS_FLASH_1
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH and environment organization
|
|
*/
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH organization
|
|
*/
|
|
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
|
#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
|
|
|
|
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
|
|
#define CFG_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */
|
|
|
|
#define CFG_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
|
|
#define CFG_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
|
|
#define CFG_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
|
|
/*
|
|
* The following defines are added for buggy IOP480 byte interface.
|
|
* All other boards should use the standard values (CPCI405 etc.)
|
|
*/
|
|
#define CFG_FLASH_READ0 0x0000 /* 0 is standard */
|
|
#define CFG_FLASH_READ1 0x0001 /* 1 is standard */
|
|
#define CFG_FLASH_READ2 0x0002 /* 2 is standard */
|
|
|
|
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Environment Variable setup
|
|
*/
|
|
#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
|
|
#define CFG_ENV_OFFSET 0x0 /* environment starts at the beginning of the EEPROM */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* I2C EEPROM (STM24C02W6) for environment
|
|
*/
|
|
#define CONFIG_HARD_I2C /* I2c with hardware support */
|
|
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
|
|
#define CFG_I2C_SLAVE 0xFE
|
|
|
|
#define CFG_I2C_EEPROM_ADDR 0xA8 /* EEPROM STM24C02W6 */
|
|
#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
|
|
/* mask of address bits that overflow into the "EEPROM chip address" */
|
|
/*#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07*/
|
|
#define CFG_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */
|
|
/* 16 byte page write mode using*/
|
|
/* last 4 bits of the address */
|
|
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
|
|
#define CFG_EEPROM_PAGE_WRITE_ENABLE
|
|
|
|
/* Flash banks JFFS2 should use */
|
|
/*
|
|
#define CFG_JFFS2_FIRST_BANK 0
|
|
#define CFG_JFFS2_FIRST_SECTOR 2
|
|
#define CFG_JFFS2_NUM_BANKS 1
|
|
*/
|
|
|
|
/*
|
|
Linux TAGs (see lib_arm/armlinux.c)
|
|
*/
|
|
#define CONFIG_CMDLINE_TAG
|
|
#undef CONFIG_SETUP_MEMORY_TAGS
|
|
#define CONFIG_INITRD_TAG
|
|
|
|
#endif /* __CONFIG_H */
|
|
|