upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/include/cmd_bsp.h

315 lines
11 KiB

/*
* (C) Copyright 2001, 2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _CMD_BSP_H_
#define _CMD_BSP_H_
#include <common.h>
#include <command.h>
#if (CONFIG_COMMANDS & CFG_CMD_BSP)
/* ----- LWMON ---------------------------------------------------------
*/
#if defined(CONFIG_LWMON)
#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
"pic", 3, 4, 1, do_pic, \
"pic - read and write PIC registers\n", \
"read reg - read PIC register `reg'\n" \
"pic write reg val - write value `val' to PIC register `reg'\n" \
), MK_CMD_TBL_ENTRY( \
"kbd", 3, 1, 1, do_kbd, \
"kbd - read keyboard status\n", \
NULL \
), MK_CMD_TBL_ENTRY( \
"lsb", 3, 2, 1, do_lsb, \
"lsb - check and set LSB switch\n", \
"on - switch LSB on\n" \
"lsb off - switch LSB off\n" \
"lsb - print current setting\n" \
),
int do_pic (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
int do_lsb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
#endif /* CONFIG_LWMON */
/* -------------------------------------------------------------------- */
/* ----- PCU E -------------------------------------------------------- */
#if defined(CONFIG_PCU_E)
#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
"puma", 4, 4, 1, do_puma, \
"puma - access PUMA FPGA\n", \
"status - print PUMA status\n" \
"puma load addr len - load PUMA configuration data\n" \
),
int do_puma (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
#endif /* CONFIG_PCU_E */
/* -------------------------------------------------------------------- */
/* ----- CCM/SCM ------------------------------------------------------ */
#if defined(CONFIG_CCM) || defined(CONFIG_SCM)
#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
"fpga", 4, 4, 1, do_fpga, \
"fpga - access FPGA(s)\n", \
"fpga status [name] - print FPGA status\n" \
"fpga reset [name] - reset FPGA\n" \
"fpga load [name] addr - load FPGA configuration data\n" \
),
int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
#endif /* CONFIG_CCM, CONFIG_SCM */
/* -------------------------------------------------------------------- */
/* ----- PIP405 ------------------------------------------------------- */
#if defined(CONFIG_PIP405)
#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
"pip405", 4, 6, 1, do_pip405, \
"pip405 - PIP405 specific Cmds\n", \
"flash mem [SrcAddr] - updates U-Boot with image in memory\n" \
"pip405 flash floppy [SrcAddr] - updates U-Boot with image from floppy\n" \
"pip405 flash mps - updates U-Boot with image from MPS\n" \
),
int do_pip405 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
#endif /* CONFIG_PIP405 */
/* -------------------------------------------------------------------- */
/* ----- MIP405 ------------------------------------------------------- */
#if defined(CONFIG_MIP405)
#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
"mip405", 4, 6, 1, do_mip405, \
"mip405 - MIP405 specific Cmds\n", \
"flash mem [SrcAddr] - updates U-Boot with image in memory\n" \
"mip405 flash mps - updates U-Boot with image from MPS\n" \
),
int do_mip405 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
#endif /* CONFIG_MIP405 */
/* -------------------------------------------------------------------- */
/* ----- DASA_SIM ----------------------------------------------------- */
#if defined(CONFIG_DASA_SIM)
#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
"pci9054", 7, 3, 1, do_pci9054, \
"pci9054 - PLX PCI9054 EEPROM access\n", \
"pci9054 info - print EEPROM values\n" \
"pci9054 update - updates EEPROM with default values\n" \
),
int do_pci9054 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
#endif /* CONFIG_DASA_SIM */
/* -------------------------------------------------------------------- */
/* ----- HYMOD -------------------------------------------------------- */
#if defined(CONFIG_HYMOD)
#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
"fpga", 4, 6, 1, do_fpga, \
"fpga - FPGA sub-system\n", \
"load [type] addr size\n" \
" - write the configuration data at memory address `addr',\n" \
" size `size' bytes, into the FPGA of type `type' (either\n" \
" `main' or `mezz', default `main'). e.g.\n" \
" `fpga load 100000 7d8f'\n" \
" loads the main FPGA with config data at address 100000\n" \
" HEX, size 7d8f HEX (32143 DEC) bytes\n" \
"fpga tftp file addr\n" \
" - transfers `file' from the tftp server into memory at\n" \
" address `addr', then writes the entire file contents\n" \
" into the main FPGA\n" \
"fpga store addr\n" \
" - read configuration data from the main FPGA (the mezz\n" \
" FPGA is write-only), into address `addr'. There must be\n" \
" enough memory available at `addr' to hold all the config\n"\
" data - the size of which is determined by VC:???\n" \
"fpga info\n" \
" - print information about the Hymod FPGA, namely the\n" \
" memory addresses at which the four FPGA local bus\n" \
" address spaces appear in the physical address space\n" \
), MK_CMD_TBL_ENTRY( \
"eeclear", 4, 1, 0, do_eecl, \
"eeclear - Clear the eeprom on a Hymod board \n", \
"[type]\n" \
" - write zeroes into the EEPROM on the board of type `type'\n"\
" (`type' is either `main' or `mezz' - default `main')\n" \
" Note: the EEPROM write enable jumper must be installed\n" \
),
int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
int do_eecl (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
#endif /* CONFIG_HYMOD */
/* -------------------------------------------------------------------- */
/* ----- CRAY405 (L1) ------------------------------------------------- */
#if defined (CONFIG_CRAYL1)
#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
"L1cmd", 5, 4, 1, do_crayL1, \
"L1cmd - L1 update, setup, commands \n", \
"L1cmd update - update flash images from host\n" \
"L1cmd boot - nfs or ramboot L1\n" \
),
int do_crayL1 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
#endif /* CONFIG_CRAY405 */
/* -------------------------------------------------------------------- */
/* ----- EVB64260 ----------------------------------------------------- */
#if defined (CONFIG_EVB64260)
#ifdef CONFIG_ZUMA_V2
#define CMD_TBL_BSP ZUMA_TBL_ENTRY
#define ZUMA_TBL_ENTRY MK_CMD_TBL_ENTRY( \
"zinit", 5, 1, 0, do_zuma_init_pbb, \
"zinit - init zuma pbb\n", \
"\n" \
" - init zuma pbb\n" \
), MK_CMD_TBL_ENTRY( \
"zdtest", 6, 3, 1, do_zuma_test_dma, \
"zdtest - run dma test\n", \
"[cmd [count]]\n" \
" - run dma cmd (w=0,v=1,cp=2,cmp=3,wi=4,vi=5), count bytes\n" \
), MK_CMD_TBL_ENTRY( \
"zminit", 5, 1, 0, do_zuma_init_mbox, \
"zminit - init zuma mbox\n", \
"\n" \
" - init zuma mbox\n" \
),
int do_zuma_init_pbb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
int do_zuma_test_dma (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
int do_zuma_init_mbox (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
void zuma_init_pbb(void);
int zuma_mbox_init(void);
int zuma_test_dma(int cmd, int size);
#else
#define CMD_TBL_BSP
#endif /* ZUMA_NTL */
#endif /* CONFIG_EVB64260 */
/* -------------------------------------------------------------------- */
/* -----W7O------------------------------------------------------------ */
#if defined(CONFIG_W7O)
#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
"vpd", 3, 2, 1, do_vpd, \
"vpd - Read Vital Product Data\n", \
"[dev_addr]\n" \
" - Read VPD Data from default address, or device address 'dev_addr'.\n" \
),
extern int do_vpd (cmd_tbl_t *, int, int, char *[]);
#endif /* CONFIG_W7O */
/* -------------------------------------------------------------------- */
/* ---- PCIPPC2 / PCIPPC6 --------------------------------------------- */
#if defined(CONFIG_PCIPPC2) || defined(CONFIG_PCIPPC6)
#if defined(CONFIG_WATCHDOG)
#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
"wd", 3, 2, 1, do_wd, \
"wd - check and set watchdog\n", \
"on - switch watchDog on\n" \
"wd off - switch watchdog off\n" \
"wd - print current status\n" \
),
extern int do_wd (cmd_tbl_t *, int, int, char *[]);
#else
#define CMD_TBL_BSP
#endif /* CONFIG_WATCHDOG */
#endif /* CONFIG_PCIPPC2 , CONFIG_PCIPPC6 */
/* -------------------------------------------------------------------- */
/* ----- PN62 --------------------------------------------------------- */
#if defined(CONFIG_PN62)
#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
"loadpci", 5, 2, 1, do_loadpci, \
"loadpci - load binary file over PCI\n", \
"[addr]\n" \
" - load binary file over PCI to address 'addr'\n" \
), MK_CMD_TBL_ENTRY( \
"led" , 3, 3, 1, do_led, \
"led - set LED 0..11 on the PN62 board\n", \
"i fun\n" \
" - set 'i'th LED to function 'fun'\n" \
),
extern int do_loadpci (cmd_tbl_t *, int, int, char *[]);
extern int do_led (cmd_tbl_t *, int, int, char *[]);
#endif /* CONFIG_PN62 */
/* -------------------------------------------------------------------- */
/* ----- TRAB --------------------------------------------------------- */
#if defined(CONFIG_TRAB)
#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
"kbd", 3, 1, 1, do_kbd, \
"kbd - read keyboard status\n", \
NULL \
),
int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
#endif /* CONFIG_TRAB */
/* -------------------------------------------------------------------- */
/* ----- R360MPI ------------------------------------------------------ */
#if defined(CONFIG_R360MPI)
#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
"kbd", 3, 1, 1, do_kbd, \
"kbd - read keyboard status\n", \
NULL \
),
int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
#endif /* CONFIG_R360MPI */
/* -------------------------------------------------------------------- */
/* ------ AMIGAONEG3SE ------------------------------------------------ */
#if defined(CONFIG_AMIGAONEG3SE)
#define CMD_TBL_BSP /* dummy */
#endif /* AmigaOneG3SE */
/* -------------------------------------------------------------------- */
#else
#define CMD_TBL_BSP
#endif /* CFG_CMD_BSP */
#endif /* _CMD_BSP_H_ */