upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
96 lines
2.7 KiB
96 lines
2.7 KiB
/*
|
|
* (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com
|
|
*
|
|
* Developed for DENX Software Engineering GmbH
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
#include <common.h>
|
|
|
|
/* This test attempts to verify board GDC. A scratch register tested, then
|
|
* simple memory test (get_ram_size()) run over GDC memory.
|
|
*/
|
|
|
|
#include <post.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define GDC_SCRATCH_REG 0xC1FF8044
|
|
#define GDC_VERSION_REG 0xC1FF8084
|
|
#define GDC_RAM_START 0xC0000000
|
|
#define GDC_RAM_END 0xC2000000
|
|
|
|
#if CONFIG_POST & CONFIG_SYS_POST_BSPEC4
|
|
|
|
static int gdc_test_reg_one(uint value)
|
|
{
|
|
int ret;
|
|
uint read_value;
|
|
|
|
/* write test pattern */
|
|
out_be32((void *)GDC_SCRATCH_REG, value);
|
|
/* read other location (protect against data lines capacity) */
|
|
ret = in_be32((void *)GDC_RAM_START);
|
|
/* verify test pattern */
|
|
read_value = in_be32((void *)GDC_SCRATCH_REG);
|
|
if (read_value != value) {
|
|
post_log("GDC SCRATCH test failed write %08X, read %08X\n",
|
|
value, read_value);
|
|
}
|
|
|
|
return (read_value != value);
|
|
}
|
|
|
|
/* Verify GDC, get memory size */
|
|
int gdc_post_test(int flags)
|
|
{
|
|
uint old_value;
|
|
int ret = 0;
|
|
|
|
post_log("\n");
|
|
old_value = in_be32((void *)GDC_SCRATCH_REG);
|
|
|
|
/*
|
|
* GPIOC2 register behaviour: the LIME graphics processor has a
|
|
* maximum of 5 GPIO ports that can be used in this hardware
|
|
* configuration. Thus only the bits for these 5 GPIOs can be
|
|
* activated in the GPIOC2 register. All other bits will always be
|
|
* read as zero.
|
|
*/
|
|
if (gdc_test_reg_one(0x00150015))
|
|
ret = 1;
|
|
if (gdc_test_reg_one(0x000A000A))
|
|
ret = 1;
|
|
|
|
out_be32((void *)GDC_SCRATCH_REG, old_value);
|
|
|
|
old_value = in_be32((void *)GDC_VERSION_REG);
|
|
post_log("GDC chip version %u.%u, year %04X\n",
|
|
(old_value >> 8) & 0xFF, old_value & 0xFF,
|
|
(old_value >> 16) & 0xFFFF);
|
|
|
|
old_value = get_ram_size((void *)GDC_RAM_START,
|
|
GDC_RAM_END - GDC_RAM_START);
|
|
post_log("GDC RAM size: %d bytes\n", old_value);
|
|
|
|
return ret;
|
|
}
|
|
#endif /* CONFIG_POST & CONFIG_SYS_POST_BSPEC4 */
|
|
|