upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support

You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

York Sun 6f5e1dc531 powerpc/8xxx: Add support for interactive DDR programming interface ... Interactive DDR debugging provides a user interface to view and modify SPD, DIMM parameters, board options and DDR controller registers before DDR is initialized. With this feature, developers can fine-tune DDR for board bringup and other debugging without frequently having to reprogram the flash. To enable this feature, define CONFIG_FSL_DDR_INTERACTIVE in board header file and set an environment variable to activate it. Syntax: setenv ddr_interactive on After reset, U-boot prompts before initializing DDR controllers FSL DDR> The available commands are print print SPD and intermediate computed data reset reboot machine recompute reload SPD and options to default and recompute regs edit modify spd, parameter, or option compute recompute registers from current next_step to end next_step shows current next_step help this message go program the memory controller and continue with u-boot The first command should be "compute", which reads data from DIMM SPDs and board options, performs the calculation then stops before setting DDR controller. A user can use "print" and "edit" commands to view and modify anything. "Go" picks up from current step with any modification and compltes the calculation then enables the DDR controller to continue u-boot. "Recompute" does it over from fresh reading. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>		13 years ago
..
Makefile	powerpc/8xxx: Add support for interactive DDR programming interface	13 years ago
common_timing_params.h	…
ctrl_regs.c	…
ddr.h	powerpc/8xxx: Add support for interactive DDR programming interface	13 years ago
ddr1_dimm_params.c	…
ddr2_dimm_params.c	…
ddr3_dimm_params.c	powerpc/mpc8xxx: check SPD length before using part number	13 years ago
interactive.c	powerpc/8xxx: Add support for interactive DDR programming interface	13 years ago
lc_common_dimm_params.c	…
main.c	powerpc/8xxx: Add support for interactive DDR programming interface	13 years ago
options.c	…
util.c	…