upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
356 lines
8.4 KiB
356 lines
8.4 KiB
/*
|
|
* (C) Copyright 2000
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <commproc.h>
|
|
#include <mpc8xx.h>
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static long int dram_size (long int, long int *, long int);
|
|
unsigned long ip860_get_dram_size(void);
|
|
unsigned long ip860_get_clk_freq (void);
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
#define _NOT_USED_ 0xFFFFFFFF
|
|
|
|
const uint sdram_table[] = {
|
|
/*
|
|
* Single Read. (Offset 0 in UPMA RAM)
|
|
*/
|
|
0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00,
|
|
0x1ff77c47, /* last */
|
|
/*
|
|
* SDRAM Initialization (offset 5 in UPMA RAM)
|
|
*
|
|
* This is no UPM entry point. The following definition uses
|
|
* the remaining space to establish an initialization
|
|
* sequence, which is executed by a RUN command.
|
|
*
|
|
*/
|
|
0x1ff77c34, 0xefeabc34, 0x1fb57c35, /* last */
|
|
/*
|
|
* Burst Read. (Offset 8 in UPMA RAM)
|
|
*/
|
|
0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00,
|
|
0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47, /* last */
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Single Write. (Offset 18 in UPMA RAM)
|
|
*/
|
|
0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47, /* last */
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Burst Write. (Offset 20 in UPMA RAM)
|
|
*/
|
|
0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
|
|
0xf0affc00, 0xe1bbbc04, 0x1ff77c47, /* last */
|
|
_NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Refresh (Offset 30 in UPMA RAM)
|
|
*/
|
|
0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
|
|
0xfffffc84, 0xfffffc07, /* last */
|
|
_NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Exception. (Offset 3c in UPMA RAM)
|
|
*/
|
|
0x7ffffc07, /* last */
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
};
|
|
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
int board_early_init_f(void)
|
|
{
|
|
volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
|
|
volatile memctl8xx_t *memctl = &immap->im_memctl;
|
|
|
|
/* init BCSR chipselect line for ip860_get_clk_freq() and ip860_get_dram_size() */
|
|
memctl->memc_or4 = CONFIG_SYS_OR4;
|
|
memctl->memc_br4 = CONFIG_SYS_BR4;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* Check Board Identity:
|
|
*
|
|
* Test ID string (IP860...)
|
|
*/
|
|
|
|
int checkboard (void)
|
|
{
|
|
unsigned char *s, *e;
|
|
unsigned char buf[64];
|
|
int i;
|
|
|
|
puts ("Board: ");
|
|
|
|
i = getenv_f("serial#", (char *)buf, sizeof (buf));
|
|
s = (i > 0) ? buf : NULL;
|
|
|
|
if (!s || strncmp ((char *)s, "IP860", 5)) {
|
|
puts ("### No HW ID - assuming IP860");
|
|
} else {
|
|
for (e = s; *e; ++e) {
|
|
if (*e == ' ')
|
|
break;
|
|
}
|
|
|
|
for (; s < e; ++s) {
|
|
putc (*s);
|
|
}
|
|
}
|
|
|
|
putc ('\n');
|
|
|
|
return (0);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
phys_size_t initdram (int board_type)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
|
|
volatile memctl8xx_t *memctl = &immap->im_memctl;
|
|
long int size;
|
|
ulong refresh_val;
|
|
|
|
upmconfig (UPMA, (uint *) sdram_table,
|
|
sizeof (sdram_table) / sizeof (uint));
|
|
|
|
/*
|
|
* Preliminary prescaler for refresh
|
|
*/
|
|
if (ip860_get_clk_freq() == 50000000)
|
|
{
|
|
memctl->memc_mptpr = 0x0400;
|
|
refresh_val = 0xC3000000;
|
|
}
|
|
else
|
|
{
|
|
memctl->memc_mptpr = 0x0200;
|
|
refresh_val = 0x9C000000;
|
|
}
|
|
|
|
|
|
memctl->memc_mar = 0x00000088;
|
|
|
|
/*
|
|
* Map controller banks 2 to the SDRAM address
|
|
*/
|
|
memctl->memc_or2 = CONFIG_SYS_OR2;
|
|
memctl->memc_br2 = CONFIG_SYS_BR2;
|
|
|
|
/* IP860 boards have only one bank SDRAM */
|
|
|
|
|
|
udelay (200);
|
|
|
|
/* perform SDRAM initializsation sequence */
|
|
|
|
memctl->memc_mamr = 0x00804114 | refresh_val;
|
|
memctl->memc_mcr = 0x80004105; /* run precharge pattern from loc 5 */
|
|
udelay(1);
|
|
memctl->memc_mamr = 0x00804118 | refresh_val;
|
|
memctl->memc_mcr = 0x80004130; /* run refresh pattern 8 times */
|
|
|
|
|
|
udelay (1000);
|
|
|
|
/*
|
|
* Check SDRAM Memory Size
|
|
*/
|
|
if (ip860_get_dram_size() == 16)
|
|
size = dram_size (refresh_val | 0x00804114, SDRAM_BASE, SDRAM_MAX_SIZE);
|
|
else
|
|
size = dram_size (refresh_val | 0x00906114, SDRAM_BASE, SDRAM_MAX_SIZE);
|
|
|
|
udelay (1000);
|
|
|
|
memctl->memc_or2 = ((-size) & 0xFFFF0000) | SDRAM_TIMING;
|
|
memctl->memc_br2 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
|
|
|
|
udelay (10000);
|
|
|
|
/*
|
|
* Also, map other memory to correct position
|
|
*/
|
|
|
|
#if (defined(CONFIG_SYS_OR1) && defined(CONFIG_SYS_BR1_PRELIM))
|
|
memctl->memc_or1 = CONFIG_SYS_OR1;
|
|
memctl->memc_br1 = CONFIG_SYS_BR1;
|
|
#endif
|
|
|
|
#if defined(CONFIG_SYS_OR3) && defined(CONFIG_SYS_BR3)
|
|
memctl->memc_or3 = CONFIG_SYS_OR3;
|
|
memctl->memc_br3 = CONFIG_SYS_BR3;
|
|
#endif
|
|
|
|
#if defined(CONFIG_SYS_OR4) && defined(CONFIG_SYS_BR4)
|
|
memctl->memc_or4 = CONFIG_SYS_OR4;
|
|
memctl->memc_br4 = CONFIG_SYS_BR4;
|
|
#endif
|
|
|
|
#if defined(CONFIG_SYS_OR5) && defined(CONFIG_SYS_BR5)
|
|
memctl->memc_or5 = CONFIG_SYS_OR5;
|
|
memctl->memc_br5 = CONFIG_SYS_BR5;
|
|
#endif
|
|
|
|
#if defined(CONFIG_SYS_OR6) && defined(CONFIG_SYS_BR6)
|
|
memctl->memc_or6 = CONFIG_SYS_OR6;
|
|
memctl->memc_br6 = CONFIG_SYS_BR6;
|
|
#endif
|
|
|
|
#if defined(CONFIG_SYS_OR7) && defined(CONFIG_SYS_BR7)
|
|
memctl->memc_or7 = CONFIG_SYS_OR7;
|
|
memctl->memc_br7 = CONFIG_SYS_BR7;
|
|
#endif
|
|
|
|
return (size);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* Check memory range for valid RAM. A simple memory test determines
|
|
* the actually available RAM size between addresses `base' and
|
|
* `base + maxsize'. Some (not all) hardware errors are detected:
|
|
* - short between address lines
|
|
* - short between data lines
|
|
*/
|
|
|
|
static long int dram_size (long int mamr_value, long int *base,
|
|
long int maxsize)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
|
|
volatile memctl8xx_t *memctl = &immap->im_memctl;
|
|
|
|
memctl->memc_mamr = mamr_value;
|
|
|
|
return (get_ram_size(base, maxsize));
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
void reset_phy (void)
|
|
{
|
|
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
|
|
ulong mask = PB_ENET_RESET | PB_ENET_JABD;
|
|
ulong reg;
|
|
|
|
/* Make sure PHY is not in low-power mode */
|
|
immr->im_cpm.cp_pbpar &= ~(mask); /* GPIO */
|
|
immr->im_cpm.cp_pbodr &= ~(mask); /* active output */
|
|
|
|
/* Set JABD low (no JABber Disable),
|
|
* and RESET high (Reset PHY)
|
|
*/
|
|
reg = immr->im_cpm.cp_pbdat;
|
|
reg = (reg & ~PB_ENET_JABD) | PB_ENET_RESET;
|
|
immr->im_cpm.cp_pbdat = reg;
|
|
|
|
/* now drive outputs */
|
|
immr->im_cpm.cp_pbdir |= mask; /* output */
|
|
udelay (1000);
|
|
/*
|
|
* Release RESET signal
|
|
*/
|
|
immr->im_cpm.cp_pbdat &= ~(PB_ENET_RESET);
|
|
udelay (1000);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
unsigned long ip860_get_clk_freq(void)
|
|
{
|
|
volatile ip860_bcsr_t *bcsr = (ip860_bcsr_t *)BCSR_BASE;
|
|
ulong temp;
|
|
uchar sysclk;
|
|
|
|
if ((bcsr->bd_status & 0x80) == 0x80) /* bd_rev valid ? */
|
|
sysclk = (bcsr->bd_rev & 0x18) >> 3;
|
|
else
|
|
sysclk = 0x00;
|
|
|
|
switch (sysclk)
|
|
{
|
|
case 0x00:
|
|
temp = 50000000;
|
|
break;
|
|
|
|
case 0x01:
|
|
temp = 80000000;
|
|
break;
|
|
|
|
default:
|
|
temp = 50000000;
|
|
break;
|
|
}
|
|
|
|
return (temp);
|
|
|
|
}
|
|
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
unsigned long ip860_get_dram_size(void)
|
|
{
|
|
volatile ip860_bcsr_t *bcsr = (ip860_bcsr_t *)BCSR_BASE;
|
|
ulong temp;
|
|
uchar dram_size;
|
|
|
|
if ((bcsr->bd_status & 0x80) == 0x80) /* bd_rev valid ? */
|
|
dram_size = (bcsr->bd_rev & 0xE0) >> 5;
|
|
else
|
|
dram_size = 0x00; /* default is 16 MB */
|
|
|
|
switch (dram_size)
|
|
{
|
|
case 0x00:
|
|
temp = 16;
|
|
break;
|
|
|
|
case 0x01:
|
|
temp = 32;
|
|
break;
|
|
|
|
default:
|
|
temp = 16;
|
|
break;
|
|
}
|
|
|
|
return (temp);
|
|
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|