upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/sparc/cpu/leon3/cpu_init.c

175 lines
4.2 KiB

/* Initializes CPU and basic hardware such as memory
* controllers, IRQ controller and system timer 0.
*
* (C) Copyright 2007, 2015
* Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/asi.h>
#include <asm/leon.h>
#include <asm/io.h>
#include <ambapp.h>
#include <grlib/irqmp.h>
#include <grlib/gptimer.h>
#include <debug_uart.h>
#include <config.h>
/* Default Plug&Play I/O area */
#ifndef CONFIG_AMBAPP_IOAREA
#define CONFIG_AMBAPP_IOAREA AMBA_DEFAULT_IOAREA
#endif
/* Select which TIMER that will become the time base */
#ifndef CONFIG_SYS_GRLIB_GPTIMER_INDEX
#define CONFIG_SYS_GRLIB_GPTIMER_INDEX 0
#endif
DECLARE_GLOBAL_DATA_PTR;
ambapp_dev_irqmp *irqmp = NULL;
/*
* Breath some life into the CPU...
*
* Run from FLASH/PROM:
* - until memory controller is set up, only registers available
* - memory controller has already been setup up, stack can be used
* - no global variables available for writing
* - constants available
*/
void cpu_init_f(void)
{
#ifdef CONFIG_DEBUG_UART
debug_uart_init();
#endif
}
/* If cache snooping is available in hardware the result will be set
* to 0x800000, otherwise 0.
*/
static unsigned int snoop_detect(void)
{
unsigned int result;
asm("lda [%%g0] 2, %0" : "=r"(result));
return result & 0x00800000;
}
int arch_cpu_init(void)
{
ambapp_apbdev apbdev;
int index;
gd->cpu_clk = CONFIG_SYS_CLK_FREQ;
gd->bus_clk = CONFIG_SYS_CLK_FREQ;
gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
gd->arch.snooping_available = snoop_detect();
/* Initialize the AMBA Plug & Play bus structure, the bus
* structure represents the AMBA bus that the CPU is located at.
*/
ambapp_bus_init(CONFIG_AMBAPP_IOAREA, CONFIG_SYS_CLK_FREQ, &ambapp_plb);
/* Initialize/clear all the timers in the system.
*/
for (index = 0; ambapp_apb_find(&ambapp_plb, VENDOR_GAISLER,
GAISLER_GPTIMER, index, &apbdev) == 1; index++) {
ambapp_dev_gptimer *timer;
unsigned int bus_freq;
int i, ntimers;
timer = (ambapp_dev_gptimer *)apbdev.address;
/* Different buses may have different frequency, the
* frequency of the bus tell in which frequency the timer
* prescaler operates.
*/
bus_freq = ambapp_bus_freq(&ambapp_plb, apbdev.ahb_bus_index);
/* Initialize prescaler common to all timers to 1MHz */
timer->scalar = timer->scalar_reload =
(((bus_freq / 1000) + 500) / 1000) - 1;
/* Clear all timers */
ntimers = timer->config & 0x7;
for (i = 0; i < ntimers; i++) {
timer->e[i].ctrl = GPTIMER_CTRL_IP;
timer->e[i].rld = 0;
timer->e[i].ctrl = GPTIMER_CTRL_LD;
}
}
return 0;
}
/*
* initialize higher level parts of CPU like time base and timers
*/
int cpu_init_r(void)
{
ambapp_apbdev apbdev;
int cpu;
/*
* Find AMBA APB IRQMP Controller,
*/
if (ambapp_apb_find(&ambapp_plb, VENDOR_GAISLER,
GAISLER_IRQMP, 0, &apbdev) != 1) {
panic("%s: IRQ controller not found\n", __func__);
return -1;
}
irqmp = (ambapp_dev_irqmp *)apbdev.address;
/* initialize the IRQMP */
irqmp->ilevel = 0xf; /* all IRQ off */
irqmp->iforce = 0;
irqmp->ipend = 0;
irqmp->iclear = 0xfffe; /* clear all old pending interrupts */
for (cpu = 0; cpu < 16; cpu++) {
/* mask and clear force for all IRQs on CPU[N] */
irqmp->cpu_mask[cpu] = 0;
irqmp->cpu_force[cpu] = 0;
}
return 0;
}
;
int timer_init(void)
{
ambapp_dev_gptimer_element *tmr;
ambapp_dev_gptimer *gptimer;
ambapp_apbdev apbdev;
unsigned bus_freq;
if (ambapp_apb_find(&ambapp_plb, VENDOR_GAISLER, GAISLER_GPTIMER,
CONFIG_SYS_GRLIB_GPTIMER_INDEX, &apbdev) != 1) {
panic("%s: gptimer not found!\n", __func__);
return -1;
}
gptimer = (ambapp_dev_gptimer *) apbdev.address;
/* Different buses may have different frequency, the
* frequency of the bus tell in which frequency the timer
* prescaler operates.
*/
bus_freq = ambapp_bus_freq(&ambapp_plb, apbdev.ahb_bus_index);
/* initialize prescaler common to all timers to 1MHz */
gptimer->scalar = gptimer->scalar_reload =
(((bus_freq / 1000) + 500) / 1000) - 1;
tmr = (ambapp_dev_gptimer_element *)&gptimer->e[0];
tmr->val = 0;
tmr->rld = ~0;
tmr->ctrl = GPTIMER_CTRL_EN | GPTIMER_CTRL_RS | GPTIMER_CTRL_LD;
CONFIG_SYS_TIMER_COUNTER = (void *)&tmr->val;
return 0;
}