upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/ddr/marvell/a38x/ddr3_a38x.h

93 lines
2.8 KiB

/*
* Copyright (C) Marvell International Ltd. and its affiliates
*
* SPDX-License-Identifier: GPL-2.0
*/
#ifndef _DDR3_A38X_H
#define _DDR3_A38X_H
#define MAX_INTERFACE_NUM 1
#define MAX_BUS_NUM 5
#include "ddr3_hws_hw_training_def.h"
#define ECC_SUPPORT
/* right now, we're not supporting this in mainline */
#undef SUPPORT_STATIC_DUNIT_CONFIG
/* Controler bus divider 1 for 32 bit, 2 for 64 bit */
#define DDR_CONTROLLER_BUS_WIDTH_MULTIPLIER 1
/* Tune internal training params values */
#define TUNE_TRAINING_PARAMS_CK_DELAY 160
#define TUNE_TRAINING_PARAMS_CK_DELAY_16 160
#define TUNE_TRAINING_PARAMS_PFINGER 41
#define TUNE_TRAINING_PARAMS_NFINGER 43
#define TUNE_TRAINING_PARAMS_PHYREG3VAL 0xa
#define MARVELL_BOARD MARVELL_BOARD_ID_BASE
#define REG_DEVICE_SAR1_ADDR 0xe4204
#define RST2_CPU_DDR_CLOCK_SELECT_IN_OFFSET 17
#define RST2_CPU_DDR_CLOCK_SELECT_IN_MASK 0x1f
/* DRAM Windows */
#define REG_XBAR_WIN_5_CTRL_ADDR 0x20050
#define REG_XBAR_WIN_5_BASE_ADDR 0x20054
/* DRAM Windows */
#define REG_XBAR_WIN_4_CTRL_ADDR 0x20040
#define REG_XBAR_WIN_4_BASE_ADDR 0x20044
#define REG_XBAR_WIN_4_REMAP_ADDR 0x20048
#define REG_XBAR_WIN_7_REMAP_ADDR 0x20078
#define REG_XBAR_WIN_16_CTRL_ADDR 0x200d0
#define REG_XBAR_WIN_16_BASE_ADDR 0x200d4
#define REG_XBAR_WIN_16_REMAP_ADDR 0x200dc
#define REG_XBAR_WIN_19_CTRL_ADDR 0x200e8
#define REG_FASTPATH_WIN_BASE_ADDR(win) (0x20180 + (0x8 * win))
#define REG_FASTPATH_WIN_CTRL_ADDR(win) (0x20184 + (0x8 * win))
/* SatR defined too change topology busWidth and ECC configuration */
#define DDR_SATR_CONFIG_MASK_WIDTH 0x8
#define DDR_SATR_CONFIG_MASK_ECC 0x10
#define DDR_SATR_CONFIG_MASK_ECC_PUP 0x20
#define REG_SAMPLE_RESET_HIGH_ADDR 0x18600
#define MV_BOARD_REFCLK MV_BOARD_REFCLK_25MHZ
/* Matrix enables DRAM modes (bus width/ECC) per boardId */
#define TOPOLOGY_UPDATE_32BIT 0
#define TOPOLOGY_UPDATE_32BIT_ECC 1
#define TOPOLOGY_UPDATE_16BIT 2
#define TOPOLOGY_UPDATE_16BIT_ECC 3
#define TOPOLOGY_UPDATE_16BIT_ECC_PUP3 4
#define TOPOLOGY_UPDATE { \
/* 32Bit, 32bit ECC, 16bit, 16bit ECC PUP4, 16bit ECC PUP3 */ \
{1, 1, 1, 1, 1}, /* RD_NAS_68XX_ID */ \
{1, 1, 1, 1, 1}, /* DB_68XX_ID */ \
{1, 0, 1, 0, 1}, /* RD_AP_68XX_ID */ \
{1, 0, 1, 0, 1}, /* DB_AP_68XX_ID */ \
{1, 0, 1, 0, 1}, /* DB_GP_68XX_ID */ \
{0, 0, 1, 1, 0}, /* DB_BP_6821_ID */ \
{1, 1, 1, 1, 1} /* DB_AMC_6820_ID */ \
};
enum {
CPU_1066MHZ_DDR_400MHZ,
CPU_RESERVED_DDR_RESERVED0,
CPU_667MHZ_DDR_667MHZ,
CPU_800MHZ_DDR_800MHZ,
CPU_RESERVED_DDR_RESERVED1,
CPU_RESERVED_DDR_RESERVED2,
CPU_RESERVED_DDR_RESERVED3,
LAST_FREQ
};
#define ACTIVE_INTERFACE_MASK 0x1
#endif /* _DDR3_A38X_H */