upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/include/configs/syzygy_hub.h

69 lines
2.2 KiB

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2012 Xilinx
* (C) Copyright 2017 Opal Kelly Inc.
*
* Configuration settings for the SYZYGY Hub development board
* See zynq-common.h for Zynq common configs
*/
#ifndef __CONFIG_SYZYGY_HUB_H
#define __CONFIG_SYZYGY_HUB_H
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_ZYNQ_GEM_EEPROM_ADDR 0x57
#define CONFIG_EXTRA_ENV_SETTINGS \
"fit_image=fit.itb\0" \
"bitstream_image=download.bit\0" \
"loadbit_addr=0x1000000\0" \
"load_addr=0x2000000\0" \
"fit_size=0x800000\0" \
"flash_off=0x100000\0" \
"nor_flash_off=0xE2100000\0" \
"fdt_high=0x20000000\0" \
"initrd_high=0x20000000\0" \
"loadbootenv_addr=0x2000000\0" \
"fdt_addr_r=0x1f00000\0" \
"pxefile_addr_r=0x2000000\0" \
"kernel_addr_r=0x2000000\0" \
"scriptaddr=0x3000000\0" \
"ramdisk_addr_r=0x3100000\0" \
"bootenv=uEnv.txt\0" \
"bootenv_dev=mmc\0" \
"loadbootenv=load ${bootenv_dev} 0 ${loadbootenv_addr} ${bootenv}\0" \
"importbootenv=echo Importing environment from ${bootenv_dev} ...; " \
"env import -t ${loadbootenv_addr} $filesize\0" \
"bootenv_existence_test=test -e ${bootenv_dev} 0 /${bootenv}\0" \
"setbootenv=if env run bootenv_existence_test; then " \
"if env run loadbootenv; then " \
"env run importbootenv; " \
"fi; " \
"fi; \0" \
"sd_loadbootenv=set bootenv_dev mmc && " \
"run setbootenv \0" \
"usb_loadbootenv=set bootenv_dev usb && usb start && run setbootenv\0" \
"preboot=if test $modeboot = sdboot; then " \
"run sd_loadbootenv; " \
"echo Checking if uenvcmd is set ...; " \
"if test -n $uenvcmd; then " \
"echo Running uenvcmd ...; " \
"run uenvcmd; " \
"fi; " \
"fi; \0" \
"sdboot=echo Copying FPGA Bitstream from SD to RAM... && " \
"load mmc 0 ${loadbit_addr} ${bitstream_image} && " \
"echo Programming FPGA... && " \
"fpga loadb 0 ${loadbit_addr} ${filesize} && " \
"echo Copying FIT from SD to RAM... && " \
"load mmc 0 ${load_addr} ${fit_image} && " \
"bootm ${load_addr}\0" \
"jtagboot=echo TFTPing FIT to RAM... && " \
"tftpboot ${load_addr} ${fit_image} && " \
"bootm ${load_addr}\0" \
DFU_ALT_INFO \
BOOTENV
#include <configs/zynq-common.h>
#endif /* __CONFIG_SYZYGY_HUB_H */