u-boot

upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support

History

Wolfgang Denk 64134f0112 Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections With recent toolchain versions, some boards would not build because or errors like this one (here for ocotea board when building with ELDK 4.2 beta): ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab] For many boards, the .bss section is big enough that it wraps around at the end of the address space (0xFFFFFFFF), so the problem will not be visible unless you use a 64 bit tool chain for development. On some boards however, changes to the code size (due to different optimizations) we bail out with section overlaps like above. The fix is to add the NOLOAD attribute to the .bss and .sbss sections, telling the linker that .bss does not consume any space in the image. Signed-off-by: Wolfgang Denk <wd@denx.de>		17 years ago
..
Makefile	Move "ar" flags to config.mk to allow for silent "make -s"	19 years ago
README	* Code cleanup:	22 years ago
config.mk	…
flash.c	…
mvs1.c	Cleanup for GCC-4.x	20 years ago
u-boot.lds	Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections	17 years ago
u-boot.lds.debug		20 years ago

README

This port is for the MATRIX Vision mvSensor.
It is an mpc823-based universal image processing board
with CMOS or CCD sensor, 4MB FLASH and 16-64MB RAM.

See http://www.matrix-vision.de for more details or mail...

mvsensor@matrix-vision.de

Howard Gray
MATRIX Vision GmbH
Talstr. 16
D-71570
Oppenweiler
Germany