upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
477 lines
12 KiB
477 lines
12 KiB
/*
|
|
* (C) Copyright 2003
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
|
|
#ifndef CONFIG_FLASH_CFI_DRIVER
|
|
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
|
|
|
|
/* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
|
|
* has nothing to do with the flash chip being 8-bit or 16-bit.
|
|
*/
|
|
#ifdef CONFIG_FLASH_16BIT
|
|
typedef unsigned short FLASH_PORT_WIDTH;
|
|
typedef volatile unsigned short FLASH_PORT_WIDTHV;
|
|
#define FLASH_ID_MASK 0xFFFF
|
|
#else
|
|
typedef unsigned char FLASH_PORT_WIDTH;
|
|
typedef volatile unsigned char FLASH_PORT_WIDTHV;
|
|
#define FLASH_ID_MASK 0xFF
|
|
#endif
|
|
|
|
#define FPW FLASH_PORT_WIDTH
|
|
#define FPWV FLASH_PORT_WIDTHV
|
|
|
|
#define ORMASK(size) ((-size) & OR_AM_MSK)
|
|
|
|
#define FLASH_CYCLE1 0x0555
|
|
#define FLASH_CYCLE2 0x02aa
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Functions
|
|
*/
|
|
static ulong flash_get_size(FPWV *addr, flash_info_t *info);
|
|
static void flash_reset(flash_info_t *info);
|
|
static int write_word_amd(flash_info_t *info, FPWV *dest, FPW data);
|
|
static flash_info_t *flash_get_info(ulong base);
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* flash_init()
|
|
*
|
|
* sets up flash_info and returns size of FLASH (bytes)
|
|
*/
|
|
unsigned long flash_init (void)
|
|
{
|
|
unsigned long size = 0;
|
|
int i;
|
|
extern void flash_preinit(void);
|
|
extern void flash_afterinit(ulong);
|
|
ulong flashbase = CONFIG_SYS_FLASH_BASE;
|
|
|
|
flash_preinit();
|
|
|
|
/* Init: no FLASHes known */
|
|
for (i=0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
|
|
memset(&flash_info[i], 0, sizeof(flash_info_t));
|
|
|
|
flash_info[i].size =
|
|
flash_get_size((FPW *)flashbase, &flash_info[i]);
|
|
|
|
size += flash_info[i].size;
|
|
flashbase += 0x800000;
|
|
}
|
|
#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
|
|
/* monitor protection ON by default */
|
|
flash_protect(FLAG_PROTECT_SET,
|
|
CONFIG_SYS_MONITOR_BASE,
|
|
CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
|
|
flash_get_info(CONFIG_SYS_MONITOR_BASE));
|
|
#endif
|
|
|
|
#ifdef CONFIG_ENV_IS_IN_FLASH
|
|
/* ENV protection ON by default */
|
|
flash_protect(FLAG_PROTECT_SET,
|
|
CONFIG_ENV_ADDR,
|
|
CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
|
|
flash_get_info(CONFIG_ENV_ADDR));
|
|
#endif
|
|
|
|
|
|
flash_afterinit(size);
|
|
return size ? size : 1;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
static void flash_reset(flash_info_t *info)
|
|
{
|
|
FPWV *base = (FPWV *)(info->start[0]);
|
|
|
|
/* Put FLASH back in read mode */
|
|
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
|
|
*base = (FPW)0x00FF00FF; /* Intel Read Mode */
|
|
else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
|
|
*base = (FPW)0x00F000F0; /* AMD Read Mode */
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
static flash_info_t *flash_get_info(ulong base)
|
|
{
|
|
int i;
|
|
flash_info_t * info;
|
|
|
|
for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i ++) {
|
|
info = & flash_info[i];
|
|
if (info->size &&
|
|
info->start[0] <= base && base <= info->start[0] + info->size - 1)
|
|
break;
|
|
}
|
|
|
|
return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
void flash_print_info (flash_info_t *info)
|
|
{
|
|
int i;
|
|
uchar *boottype;
|
|
uchar *bootletter;
|
|
char *fmt;
|
|
uchar botbootletter[] = "B";
|
|
uchar topbootletter[] = "T";
|
|
uchar botboottype[] = "bottom boot sector";
|
|
uchar topboottype[] = "top boot sector";
|
|
|
|
if (info->flash_id == FLASH_UNKNOWN) {
|
|
printf ("missing or unknown FLASH type\n");
|
|
return;
|
|
}
|
|
|
|
switch (info->flash_id & FLASH_VENDMASK) {
|
|
case FLASH_MAN_AMD: printf ("AMD "); break;
|
|
case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break;
|
|
case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
|
|
case FLASH_MAN_SST: printf ("SST "); break;
|
|
case FLASH_MAN_STM: printf ("STM "); break;
|
|
case FLASH_MAN_INTEL: printf ("INTEL "); break;
|
|
default: printf ("Unknown Vendor "); break;
|
|
}
|
|
|
|
/* check for top or bottom boot, if it applies */
|
|
if (info->flash_id & FLASH_BTYPE) {
|
|
boottype = botboottype;
|
|
bootletter = botbootletter;
|
|
}
|
|
else {
|
|
boottype = topboottype;
|
|
bootletter = topbootletter;
|
|
}
|
|
|
|
switch (info->flash_id & FLASH_TYPEMASK) {
|
|
case FLASH_AMDLV065D:
|
|
fmt = "29LV065 (64 Mbit, uniform sectors)\n";
|
|
break;
|
|
default:
|
|
fmt = "Unknown Chip Type\n";
|
|
break;
|
|
}
|
|
|
|
printf (fmt, bootletter, boottype);
|
|
|
|
printf (" Size: %ld MB in %d Sectors\n",
|
|
info->size >> 20,
|
|
info->sector_count);
|
|
|
|
printf (" Sector Start Addresses:");
|
|
|
|
for (i=0; i<info->sector_count; ++i) {
|
|
if ((i % 5) == 0) {
|
|
printf ("\n ");
|
|
}
|
|
|
|
printf (" %08lX%s", info->start[i],
|
|
info->protect[i] ? " (RO)" : " ");
|
|
}
|
|
|
|
printf ("\n");
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
/*
|
|
* The following code cannot be run from FLASH!
|
|
*/
|
|
|
|
ulong flash_get_size (FPWV *addr, flash_info_t *info)
|
|
{
|
|
int i;
|
|
FPWV* addr2;
|
|
|
|
/* Write auto select command: read Manufacturer ID */
|
|
/* Write auto select command sequence and test FLASH answer */
|
|
addr[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* for AMD, Intel ignores this */
|
|
addr[FLASH_CYCLE2] = (FPW)0x00550055; /* for AMD, Intel ignores this */
|
|
addr[FLASH_CYCLE1] = (FPW)0x00900090; /* selects Intel or AMD */
|
|
|
|
/* The manufacturer codes are only 1 byte, so just use 1 byte.
|
|
* This works for any bus width and any FLASH device width.
|
|
*/
|
|
udelay(100);
|
|
switch (addr[0] & 0xff) {
|
|
|
|
case (uchar)AMD_MANUFACT:
|
|
info->flash_id = FLASH_MAN_AMD;
|
|
break;
|
|
|
|
case (uchar)INTEL_MANUFACT:
|
|
info->flash_id = FLASH_MAN_INTEL;
|
|
break;
|
|
|
|
default:
|
|
info->flash_id = FLASH_UNKNOWN;
|
|
info->sector_count = 0;
|
|
info->size = 0;
|
|
break;
|
|
}
|
|
|
|
/* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
|
|
if (info->flash_id != FLASH_UNKNOWN) switch ((FPW)addr[1]) {
|
|
|
|
case (FPW)AMD_ID_LV065D:
|
|
info->flash_id += FLASH_AMDLV065D;
|
|
info->sector_count = 128;
|
|
info->size = 0x00800000;
|
|
for( i = 0; i < info->sector_count; i++ )
|
|
info->start[i] = (ulong)addr + (i * 0x10000);
|
|
break; /* => 8 or 16 MB */
|
|
|
|
default:
|
|
info->flash_id = FLASH_UNKNOWN;
|
|
info->sector_count = 0;
|
|
info->size = 0;
|
|
return (0); /* => no or unknown flash */
|
|
}
|
|
|
|
/* test for real flash at bank 1 */
|
|
addr2 = (FPW *)((ulong)addr | 0x800000);
|
|
if (addr2 != addr &&
|
|
((addr2[0] & 0xff) == (addr[0] & 0xff)) && ((FPW)addr2[1] == (FPW)addr[1])) {
|
|
/* Seems 2 banks are the same space (8Mb chip is installed,
|
|
* J24 in default position (CS0)). Disable this (first) bank.
|
|
*/
|
|
info->flash_id = FLASH_UNKNOWN;
|
|
info->sector_count = 0;
|
|
info->size = 0;
|
|
}
|
|
/* Put FLASH back in read mode */
|
|
flash_reset(info);
|
|
|
|
return (info->size);
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
int flash_erase (flash_info_t *info, int s_first, int s_last)
|
|
{
|
|
FPWV *addr;
|
|
int flag, prot, sect;
|
|
int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL;
|
|
ulong start, now, last;
|
|
int rcode = 0;
|
|
|
|
if ((s_first < 0) || (s_first > s_last)) {
|
|
if (info->flash_id == FLASH_UNKNOWN) {
|
|
printf ("- missing\n");
|
|
} else {
|
|
printf ("- no sectors to erase\n");
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
switch (info->flash_id & FLASH_TYPEMASK) {
|
|
case FLASH_AMDLV065D:
|
|
break;
|
|
case FLASH_UNKNOWN:
|
|
default:
|
|
printf ("Can't erase unknown flash type %08lx - aborted\n",
|
|
info->flash_id);
|
|
return 1;
|
|
}
|
|
|
|
prot = 0;
|
|
for (sect=s_first; sect<=s_last; ++sect) {
|
|
if (info->protect[sect]) {
|
|
prot++;
|
|
}
|
|
}
|
|
|
|
if (prot) {
|
|
printf ("- Warning: %d protected sectors will not be erased!\n",
|
|
prot);
|
|
} else {
|
|
printf ("\n");
|
|
}
|
|
|
|
last = get_timer(0);
|
|
|
|
/* Start erase on unprotected sectors */
|
|
for (sect = s_first; sect<=s_last && rcode == 0; sect++) {
|
|
|
|
if (info->protect[sect] != 0) /* protected, skip it */
|
|
continue;
|
|
|
|
/* Disable interrupts which might cause a timeout here */
|
|
flag = disable_interrupts();
|
|
|
|
addr = (FPWV *)(info->start[sect]);
|
|
if (intel) {
|
|
*addr = (FPW)0x00500050; /* clear status register */
|
|
*addr = (FPW)0x00200020; /* erase setup */
|
|
*addr = (FPW)0x00D000D0; /* erase confirm */
|
|
}
|
|
else {
|
|
/* must be AMD style if not Intel */
|
|
FPWV *base; /* first address in bank */
|
|
|
|
base = (FPWV *)(info->start[0]);
|
|
base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */
|
|
base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */
|
|
base[FLASH_CYCLE1] = (FPW)0x00800080; /* erase mode */
|
|
base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */
|
|
base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */
|
|
*addr = (FPW)0x00300030; /* erase sector */
|
|
}
|
|
|
|
/* re-enable interrupts if necessary */
|
|
if (flag)
|
|
enable_interrupts();
|
|
|
|
start = get_timer(0);
|
|
|
|
/* wait at least 50us for AMD, 80us for Intel.
|
|
* Let's wait 1 ms.
|
|
*/
|
|
udelay (1000);
|
|
|
|
while ((*addr & (FPW)0x00800080) != (FPW)0x00800080) {
|
|
if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
|
|
printf ("Timeout\n");
|
|
|
|
if (intel) {
|
|
/* suspend erase */
|
|
*addr = (FPW)0x00B000B0;
|
|
}
|
|
|
|
flash_reset(info); /* reset to read mode */
|
|
rcode = 1; /* failed */
|
|
break;
|
|
}
|
|
|
|
/* show that we're waiting */
|
|
if ((get_timer(last)) > CONFIG_SYS_HZ) {/* every second */
|
|
putc ('.');
|
|
last = get_timer(0);
|
|
}
|
|
}
|
|
|
|
/* show that we're waiting */
|
|
if ((get_timer(last)) > CONFIG_SYS_HZ) { /* every second */
|
|
putc ('.');
|
|
last = get_timer(0);
|
|
}
|
|
|
|
flash_reset(info); /* reset to read mode */
|
|
}
|
|
|
|
printf (" done\n");
|
|
return rcode;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Copy memory to flash, returns:
|
|
* 0 - OK
|
|
* 1 - write timeout
|
|
* 2 - Flash not erased
|
|
*/
|
|
int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
|
|
{
|
|
FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */
|
|
int bytes; /* number of bytes to program in current word */
|
|
int left; /* number of bytes left to program */
|
|
int i, res;
|
|
|
|
for (left = cnt, res = 0;
|
|
left > 0 && res == 0;
|
|
addr += sizeof(data), left -= sizeof(data) - bytes) {
|
|
|
|
bytes = addr & (sizeof(data) - 1);
|
|
addr &= ~(sizeof(data) - 1);
|
|
|
|
/* combine source and destination data so can program
|
|
* an entire word of 16 or 32 bits
|
|
*/
|
|
for (i = 0; i < sizeof(data); i++) {
|
|
data <<= 8;
|
|
if (i < bytes || i - bytes >= left )
|
|
data += *((uchar *)addr + i);
|
|
else
|
|
data += *src++;
|
|
}
|
|
|
|
/* write one word to the flash */
|
|
switch (info->flash_id & FLASH_VENDMASK) {
|
|
case FLASH_MAN_AMD:
|
|
res = write_word_amd(info, (FPWV *)addr, data);
|
|
break;
|
|
default:
|
|
/* unknown flash type, error! */
|
|
printf ("missing or unknown FLASH type\n");
|
|
res = 1; /* not really a timeout, but gives error */
|
|
break;
|
|
}
|
|
}
|
|
|
|
return (res);
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Write a word to Flash for AMD FLASH
|
|
* A word is 16 or 32 bits, whichever the bus width of the flash bank
|
|
* (not an individual chip) is.
|
|
*
|
|
* returns:
|
|
* 0 - OK
|
|
* 1 - write timeout
|
|
* 2 - Flash not erased
|
|
*/
|
|
static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data)
|
|
{
|
|
ulong start;
|
|
int flag;
|
|
int res = 0; /* result, assume success */
|
|
FPWV *base; /* first address in flash bank */
|
|
|
|
/* Check if Flash is (sufficiently) erased */
|
|
if ((*dest & data) != data) {
|
|
return (2);
|
|
}
|
|
|
|
|
|
base = (FPWV *)(info->start[0]);
|
|
|
|
/* Disable interrupts which might cause a timeout here */
|
|
flag = disable_interrupts();
|
|
|
|
base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */
|
|
base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */
|
|
base[FLASH_CYCLE1] = (FPW)0x00A000A0; /* selects program mode */
|
|
|
|
*dest = data; /* start programming the data */
|
|
|
|
/* re-enable interrupts if necessary */
|
|
if (flag)
|
|
enable_interrupts();
|
|
|
|
start = get_timer (0);
|
|
|
|
/* data polling for D7 */
|
|
while (res == 0 && (*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) {
|
|
if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
|
|
*dest = (FPW)0x00F000F0; /* reset bank */
|
|
res = 1;
|
|
}
|
|
}
|
|
|
|
return (res);
|
|
}
|
|
#endif /*CONFIG_FLASH_CFI_DRIVER*/
|
|
|