upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
75 lines
2.8 KiB
75 lines
2.8 KiB
/*
|
|
* SPDX-License-Identifier: GPL-2.0 IBM-pibs
|
|
*/
|
|
/*------------------------------------------------------------------------- */
|
|
/* Function: ext_bus_cntlr_init */
|
|
/* Description: Initializes the External Bus Controller for the external */
|
|
/* peripherals. IMPORTANT: For pass1 this code must run from */
|
|
/* cache since you can not reliably change a peripheral banks */
|
|
/* timing register (pbxap) while running code from that bank. */
|
|
/* For ex., since we are running from ROM on bank 0, we can NOT */
|
|
/* execute the code that modifies bank 0 timings from ROM, so */
|
|
/* we run it from cache. */
|
|
/* */
|
|
/* */
|
|
/* The layout for the PEI JSE board: */
|
|
/* Bank 0 - Flash and SRAM */
|
|
/* Bank 1 - SystemACE */
|
|
/* Bank 2 - not used */
|
|
/* Bank 3 - not used */
|
|
/* Bank 4 - not used */
|
|
/* Bank 5 - not used */
|
|
/* Bank 6 - not used */
|
|
/* Bank 7 - not used */
|
|
/*------------------------------------------------------------------------- */
|
|
#include <asm/ppc4xx.h>
|
|
|
|
#include <ppc_asm.tmpl>
|
|
#include <ppc_defs.h>
|
|
|
|
#include <asm/cache.h>
|
|
#include <asm/mmu.h>
|
|
|
|
.globl ext_bus_cntlr_init
|
|
ext_bus_cntlr_init:
|
|
mflr r4 /* save link register */
|
|
bl ..getAddr
|
|
..getAddr:
|
|
mflr r3 /* get address of ..getAddr */
|
|
mtlr r4 /* restore link register */
|
|
addi r4,0,14 /* set ctr to 10; used to prefetch */
|
|
mtctr r4 /* 10 cache lines to fit this function */
|
|
/* in cache (gives us 8x10=80 instrctns) */
|
|
..ebcloop:
|
|
icbt r0,r3 /* prefetch cache line for addr in r3 */
|
|
addi r3,r3,32 /* move to next cache line */
|
|
bdnz ..ebcloop /* continue for 10 cache lines */
|
|
|
|
/*----------------------------------------------------------------- */
|
|
/* Delay to ensure all accesses to ROM are complete before changing */
|
|
/* bank 0 timings. 200usec should be enough. */
|
|
/* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles */
|
|
/*----------------------------------------------------------------- */
|
|
addis r3,0,0x0
|
|
ori r3,r3,0xA000 /* ensure 200usec have passed since reset */
|
|
mtctr r3
|
|
..spinlp:
|
|
bdnz ..spinlp /* spin loop */
|
|
|
|
/*----------------------------------------------------------------- */
|
|
/* Memory Bank 0 (Flash) initialization */
|
|
/*----------------------------------------------------------------- */
|
|
|
|
addi r4,0,PB1AP
|
|
mtdcr EBC0_CFGADDR,r4
|
|
addis r4,0,0x9B01
|
|
ori r4,r4,0x5480
|
|
mtdcr EBC0_CFGDATA,r4
|
|
|
|
addi r4,0,PB0CR
|
|
mtdcr EBC0_CFGADDR,r4
|
|
addis r4,0,0xFFF1 /* BAS=0xFFF,BS=0x0(1MB),BU=0x3(R/W), */
|
|
ori r4,r4,0x8000 /* BW=0x0( 8 bits) */
|
|
mtdcr EBC0_CFGDATA,r4
|
|
|
|
blr
|
|
|