upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
410 lines
8.3 KiB
410 lines
8.3 KiB
/*
|
|
* (C) Copyright 2007
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <malloc.h>
|
|
#include <environment.h>
|
|
#include <logbuff.h>
|
|
#include <post.h>
|
|
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <asm/ppc4xx-gpio.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define REBOOT_MAGIC 0x07081967
|
|
#define REBOOT_NOP 0x00000000
|
|
#define REBOOT_DO_POST 0x00000001
|
|
|
|
extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
|
|
|
|
ulong flash_get_size(ulong base, int banknum);
|
|
void env_crc_update(void);
|
|
|
|
static u32 start_time;
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
|
|
mtdcr(UIC0ER, 0x00000000); /* disable all ints */
|
|
mtdcr(UIC0CR, 0x00000000);
|
|
mtdcr(UIC0PR, 0xFFFF7F00); /* set int polarities */
|
|
mtdcr(UIC0TR, 0x00000000); /* set int trigger levels */
|
|
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
|
|
mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
|
|
|
|
/*
|
|
* Configure CPC0_PCI to enable PerWE as output
|
|
*/
|
|
mtdcr(CPC0_PCI, CPC0_PCI_SPE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
u32 pbcr;
|
|
int size_val = 0;
|
|
u32 post_magic;
|
|
u32 post_val;
|
|
|
|
post_magic = in_be32((void *)CONFIG_SYS_POST_MAGIC);
|
|
post_val = in_be32((void *)CONFIG_SYS_POST_VAL);
|
|
if ((post_magic == REBOOT_MAGIC) && (post_val == REBOOT_DO_POST)) {
|
|
/*
|
|
* Set special bootline bootparameter to pass this POST boot
|
|
* mode to Linux to reset the username/password
|
|
*/
|
|
setenv("addmisc", "setenv bootargs \\${bootargs} factory_reset=yes");
|
|
|
|
/*
|
|
* Normally don't run POST tests, only when enabled
|
|
* via the sw-reset button. So disable further tests
|
|
* upon next bootup here.
|
|
*/
|
|
out_be32((void *)CONFIG_SYS_POST_VAL, REBOOT_NOP);
|
|
} else {
|
|
/*
|
|
* Only run POST when initiated via the sw-reset button mechanism
|
|
*/
|
|
post_word_store(0);
|
|
}
|
|
|
|
/*
|
|
* Get current time
|
|
*/
|
|
start_time = get_timer(0);
|
|
|
|
/*
|
|
* FLASH stuff...
|
|
*/
|
|
|
|
/* Re-do sizing to get full correct info */
|
|
|
|
/* adjust flash start and offset */
|
|
mfebc(PB0CR, pbcr);
|
|
switch (gd->bd->bi_flashsize) {
|
|
case 1 << 20:
|
|
size_val = 0;
|
|
break;
|
|
case 2 << 20:
|
|
size_val = 1;
|
|
break;
|
|
case 4 << 20:
|
|
size_val = 2;
|
|
break;
|
|
case 8 << 20:
|
|
size_val = 3;
|
|
break;
|
|
case 16 << 20:
|
|
size_val = 4;
|
|
break;
|
|
case 32 << 20:
|
|
size_val = 5;
|
|
break;
|
|
case 64 << 20:
|
|
size_val = 6;
|
|
break;
|
|
case 128 << 20:
|
|
size_val = 7;
|
|
break;
|
|
}
|
|
pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
|
|
mtebc(PB0CR, pbcr);
|
|
|
|
/*
|
|
* Re-check to get correct base address
|
|
*/
|
|
flash_get_size(gd->bd->bi_flashstart, 0);
|
|
|
|
/* Monitor protection ON by default */
|
|
(void)flash_protect(FLAG_PROTECT_SET,
|
|
-CONFIG_SYS_MONITOR_LEN,
|
|
0xffffffff,
|
|
&flash_info[0]);
|
|
|
|
/* Env protection ON by default */
|
|
(void)flash_protect(FLAG_PROTECT_SET,
|
|
CONFIG_ENV_ADDR_REDUND,
|
|
CONFIG_ENV_ADDR_REDUND + 2*CONFIG_ENV_SECT_SIZE - 1,
|
|
&flash_info[0]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Check Board Identity:
|
|
*/
|
|
int checkboard(void)
|
|
{
|
|
char buf[64];
|
|
int i = getenv_f("serial#", buf, sizeof(buf));
|
|
|
|
puts("Board: Zeus-");
|
|
|
|
if (in_be32((void *)GPIO0_IR) & GPIO_VAL(CONFIG_SYS_GPIO_ZEUS_PE))
|
|
puts("PE");
|
|
else
|
|
puts("CE");
|
|
|
|
puts(" of BulletEndPoint");
|
|
|
|
if (i > 0) {
|
|
puts(", serial# ");
|
|
puts(buf);
|
|
}
|
|
putc('\n');
|
|
|
|
/* both LED's off */
|
|
gpio_write_bit(CONFIG_SYS_GPIO_LED_RED, 0);
|
|
gpio_write_bit(CONFIG_SYS_GPIO_LED_GREEN, 0);
|
|
udelay(10000);
|
|
/* and on again */
|
|
gpio_write_bit(CONFIG_SYS_GPIO_LED_RED, 1);
|
|
gpio_write_bit(CONFIG_SYS_GPIO_LED_GREEN, 1);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int default_env_var(char *buf, char *var)
|
|
{
|
|
char *ptr;
|
|
char *val;
|
|
|
|
/*
|
|
* Find env variable
|
|
*/
|
|
ptr = strstr(buf + 4, var);
|
|
if (ptr == NULL) {
|
|
printf("ERROR: %s not found!\n", var);
|
|
return -1;
|
|
}
|
|
ptr += strlen(var) + 1;
|
|
|
|
/*
|
|
* Now the ethaddr needs to be updated in the "normal"
|
|
* environment storage -> redundant flash.
|
|
*/
|
|
val = ptr;
|
|
setenv(var, val);
|
|
printf("Updated %s from eeprom to %s!\n", var, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int restore_default(void)
|
|
{
|
|
char *buf;
|
|
char *buf_save;
|
|
u32 crc;
|
|
|
|
set_default_env("");
|
|
|
|
gd->env_valid = 1;
|
|
|
|
/*
|
|
* Read board specific values from I2C EEPROM
|
|
* and set env variables accordingly
|
|
* -> ethaddr, eth1addr, serial#
|
|
*/
|
|
buf = buf_save = malloc(FACTORY_RESET_ENV_SIZE);
|
|
if (buf == NULL) {
|
|
printf("ERROR: malloc() failed\n");
|
|
return -1;
|
|
}
|
|
if (eeprom_read(FACTORY_RESET_I2C_EEPROM, FACTORY_RESET_ENV_OFFS,
|
|
(u8 *)buf, FACTORY_RESET_ENV_SIZE)) {
|
|
puts("\nError reading EEPROM!\n");
|
|
} else {
|
|
crc = crc32(0, (u8 *)(buf + 4), FACTORY_RESET_ENV_SIZE - 4);
|
|
if (crc != *(u32 *)buf) {
|
|
printf("ERROR: crc mismatch %08x %08x\n", crc, *(u32 *)buf);
|
|
return -1;
|
|
}
|
|
|
|
default_env_var(buf, "ethaddr");
|
|
buf += 8 + 18;
|
|
default_env_var(buf, "eth1addr");
|
|
buf += 9 + 18;
|
|
default_env_var(buf, "serial#");
|
|
}
|
|
|
|
/*
|
|
* Finally save updated env variables back to flash
|
|
*/
|
|
saveenv();
|
|
|
|
free(buf_save);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int do_set_default(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
char *buf;
|
|
char *buf_save;
|
|
char str[32];
|
|
u32 crc;
|
|
char var[32];
|
|
|
|
if (argc < 4) {
|
|
puts("ERROR!\n");
|
|
return -1;
|
|
}
|
|
|
|
buf = buf_save = malloc(FACTORY_RESET_ENV_SIZE);
|
|
memset(buf, 0, FACTORY_RESET_ENV_SIZE);
|
|
|
|
strcpy(var, "ethaddr");
|
|
printf("Setting %s to %s\n", var, argv[1]);
|
|
sprintf(str, "%s=%s", var, argv[1]);
|
|
strcpy(buf + 4, str);
|
|
buf += strlen(str) + 1;
|
|
|
|
strcpy(var, "eth1addr");
|
|
printf("Setting %s to %s\n", var, argv[2]);
|
|
sprintf(str, "%s=%s", var, argv[2]);
|
|
strcpy(buf + 4, str);
|
|
buf += strlen(str) + 1;
|
|
|
|
strcpy(var, "serial#");
|
|
printf("Setting %s to %s\n", var, argv[3]);
|
|
sprintf(str, "%s=%s", var, argv[3]);
|
|
strcpy(buf + 4, str);
|
|
|
|
crc = crc32(0, (u8 *)(buf_save + 4), FACTORY_RESET_ENV_SIZE - 4);
|
|
*(u32 *)buf_save = crc;
|
|
|
|
if (eeprom_write(FACTORY_RESET_I2C_EEPROM, FACTORY_RESET_ENV_OFFS,
|
|
(u8 *)buf_save, FACTORY_RESET_ENV_SIZE)) {
|
|
puts("\nError writing EEPROM!\n");
|
|
return -1;
|
|
}
|
|
|
|
free(buf_save);
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
setdef, 4, 1, do_set_default,
|
|
"write board-specific values to EEPROM (ethaddr...)",
|
|
"ethaddr eth1addr serial#\n - write board-specific values to EEPROM"
|
|
);
|
|
|
|
static inline int sw_reset_pressed(void)
|
|
{
|
|
return !(in_be32((void *)GPIO0_IR) & GPIO_VAL(CONFIG_SYS_GPIO_SW_RESET));
|
|
}
|
|
|
|
int do_chkreset(cmd_tbl_t* cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
int delta;
|
|
int count = 0;
|
|
int post = 0;
|
|
int factory_reset = 0;
|
|
|
|
if (!sw_reset_pressed()) {
|
|
printf("SW-Reset already high (Button released)\n");
|
|
printf("-> No action taken!\n");
|
|
return 0;
|
|
}
|
|
|
|
printf("Waiting for SW-Reset button to be released.");
|
|
|
|
while (1) {
|
|
delta = get_timer(start_time);
|
|
if (!sw_reset_pressed())
|
|
break;
|
|
|
|
if ((delta > CONFIG_SYS_TIME_POST) && !post) {
|
|
printf("\nWhen released now, POST tests will be started.");
|
|
gpio_write_bit(CONFIG_SYS_GPIO_LED_GREEN, 0);
|
|
post = 1;
|
|
}
|
|
|
|
if ((delta > CONFIG_SYS_TIME_FACTORY_RESET) && !factory_reset) {
|
|
printf("\nWhen released now, factory default values"
|
|
" will be restored.");
|
|
gpio_write_bit(CONFIG_SYS_GPIO_LED_RED, 0);
|
|
factory_reset = 1;
|
|
}
|
|
|
|
udelay(1000);
|
|
if (!(count++ % 1000))
|
|
printf(".");
|
|
}
|
|
|
|
|
|
printf("\nSW-Reset Button released after %d milli-seconds!\n", delta);
|
|
|
|
if (delta > CONFIG_SYS_TIME_FACTORY_RESET) {
|
|
printf("Starting factory reset value restoration...\n");
|
|
|
|
/*
|
|
* Restore default setting
|
|
*/
|
|
restore_default();
|
|
|
|
/*
|
|
* Reset the board for default to become valid
|
|
*/
|
|
do_reset(NULL, 0, 0, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
if (delta > CONFIG_SYS_TIME_POST) {
|
|
printf("Starting POST configuration...\n");
|
|
|
|
/*
|
|
* Enable POST upon next bootup
|
|
*/
|
|
out_be32((void *)CONFIG_SYS_POST_MAGIC, REBOOT_MAGIC);
|
|
out_be32((void *)CONFIG_SYS_POST_VAL, REBOOT_DO_POST);
|
|
post_bootmode_init();
|
|
|
|
/*
|
|
* Reset the logbuffer for a clean start
|
|
*/
|
|
logbuff_reset();
|
|
|
|
do_reset(NULL, 0, 0, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_CMD (
|
|
chkreset, 1, 1, do_chkreset,
|
|
"Check for status of SW-reset button and act accordingly",
|
|
""
|
|
);
|
|
|
|
#if defined(CONFIG_POST)
|
|
/*
|
|
* Returns 1 if keys pressed to start the power-on long-running tests
|
|
* Called from board_init_f().
|
|
*/
|
|
int post_hotkeys_pressed(void)
|
|
{
|
|
u32 post_magic;
|
|
u32 post_val;
|
|
|
|
post_magic = in_be32((void *)CONFIG_SYS_POST_MAGIC);
|
|
post_val = in_be32((void *)CONFIG_SYS_POST_VAL);
|
|
|
|
if ((post_magic == REBOOT_MAGIC) && (post_val == REBOOT_DO_POST))
|
|
return 1;
|
|
else
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_POST */
|
|
|