upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
85 lines
2.0 KiB
85 lines
2.0 KiB
/*
|
|
* (C) Copyright 2007
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/* define DEBUG for debugging output (obviously ;-)) */
|
|
#if 0
|
|
#define DEBUG
|
|
#endif
|
|
|
|
#include <common.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <asm/ppc4xx-gpio.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
extern void board_pll_init_f(void);
|
|
|
|
static void cram_bcr_write(u32 wr_val)
|
|
{
|
|
wr_val <<= 2;
|
|
|
|
/* set CRAM_CRE to 1 */
|
|
gpio_write_bit(CONFIG_SYS_GPIO_CRAM_CRE, 1);
|
|
|
|
/* Write BCR to CRAM on CS1 */
|
|
out32(wr_val + 0x00200000, 0);
|
|
debug("CRAM VAL: %08x for CS1 ", wr_val + 0x00200000);
|
|
|
|
/* Write BCR to CRAM on CS2 */
|
|
out32(wr_val + 0x02200000, 0);
|
|
debug("CRAM VAL: %08x for CS2\n", wr_val + 0x02200000);
|
|
|
|
sync();
|
|
eieio();
|
|
|
|
/* set CRAM_CRE back to 0 (normal operation) */
|
|
gpio_write_bit(CONFIG_SYS_GPIO_CRAM_CRE, 0);
|
|
|
|
return;
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
int i;
|
|
u32 val;
|
|
|
|
/* 1. EBC need to program READY, CLK, ADV for ASync mode */
|
|
gpio_config(CONFIG_SYS_GPIO_CRAM_CLK, GPIO_OUT, GPIO_SEL, GPIO_OUT_0);
|
|
gpio_config(CONFIG_SYS_GPIO_CRAM_ADV, GPIO_OUT, GPIO_SEL, GPIO_OUT_0);
|
|
gpio_config(CONFIG_SYS_GPIO_CRAM_CRE, GPIO_OUT, GPIO_SEL, GPIO_OUT_0);
|
|
gpio_config(CONFIG_SYS_GPIO_CRAM_WAIT, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG);
|
|
|
|
/* 2. EBC in Async mode */
|
|
mtebc(PB1AP, 0x078F1EC0);
|
|
mtebc(PB2AP, 0x078F1EC0);
|
|
mtebc(PB1CR, 0x000BC000);
|
|
mtebc(PB2CR, 0x020BC000);
|
|
|
|
/* 3. Set CRAM in Sync mode */
|
|
cram_bcr_write(0x7012); /* CRAM burst setting */
|
|
|
|
/* 4. EBC in Sync mode */
|
|
mtebc(PB1AP, 0x9C0201C0);
|
|
mtebc(PB2AP, 0x9C0201C0);
|
|
|
|
/* Set GPIO pins back to alternate function */
|
|
gpio_config(CONFIG_SYS_GPIO_CRAM_CLK, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG);
|
|
gpio_config(CONFIG_SYS_GPIO_CRAM_ADV, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG);
|
|
|
|
/* Config EBC to use RDY */
|
|
mfsdr(SDR0_ULTRA0, val);
|
|
mtsdr(SDR0_ULTRA0, val | SDR_ULTRA0_EBCRDYEN);
|
|
|
|
/* Wait a short while, since for NAND booting this is too fast */
|
|
for (i=0; i<200000; i++)
|
|
;
|
|
|
|
gd->ram_size = CONFIG_SYS_MBYTES_RAM << 20;
|
|
|
|
return 0;
|
|
}
|
|
|