upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/freescale/mpc8349emds/mpc8349emds.c

289 lines
6.7 KiB

/*
* (C) Copyright 2006
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <ioports.h>
#include <mpc83xx.h>
#include <asm/mpc8349_pci.h>
#include <i2c.h>
#include <spi.h>
#include <miiphy.h>
#ifdef CONFIG_SYS_FSL_DDR2
#include <fsl_ddr_sdram.h>
#else
#include <spd_sdram.h>
#endif
#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
int fixed_sdram(void);
void sdram_init(void);
#if defined(CONFIG_DDR_ECC) && defined(CONFIG_MPC83xx)
void ddr_enable_ecc(unsigned int dram_size);
#endif
int board_early_init_f (void)
{
volatile u8* bcsr = (volatile u8*)CONFIG_SYS_BCSR;
/* Enable flash write */
bcsr[1] &= ~0x01;
#ifdef CONFIG_SYS_USE_MPC834XSYS_USB_PHY
/* Use USB PHY on SYS board */
bcsr[5] |= 0x02;
#endif
return 0;
}
#define ns2clk(ns) (ns / (1000000000 / CONFIG_8349_CLKIN) + 1)
int dram_init(void)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
phys_size_t msize = 0;
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
return -ENXIO;
/* DDR SDRAM - Main SODIMM */
im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
#if defined(CONFIG_SPD_EEPROM)
#ifndef CONFIG_SYS_FSL_DDR2
msize = spd_sdram() * 1024 * 1024;
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
ddr_enable_ecc(msize);
#endif
#else
msize = fsl_ddr_sdram();
#endif
#else
msize = fixed_sdram() * 1024 * 1024;
#endif
/*
* Initialize SDRAM if it is on local bus.
*/
sdram_init();
/* set total bus SDRAM size(bytes) -- DDR */
gd->ram_size = msize;
return 0;
}
#if !defined(CONFIG_SPD_EEPROM)
/*************************************************************************
* fixed sdram init -- doesn't use serial presence detect.
************************************************************************/
int fixed_sdram(void)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
u32 msize = CONFIG_SYS_DDR_SIZE;
u32 ddr_size = msize << 20; /* DDR size in bytes */
u32 ddr_size_log2 = __ilog2(ddr_size);
im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
#if (CONFIG_SYS_DDR_SIZE != 256)
#warning Currenly any ddr size other than 256 is not supported
#endif
#ifdef CONFIG_DDR_II
im->ddr.csbnds[2].csbnds = CONFIG_SYS_DDR_CS2_BNDS;
im->ddr.cs_config[2] = CONFIG_SYS_DDR_CS2_CONFIG;
im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
#else
#if ((CONFIG_SYS_DDR_SDRAM_BASE & 0x00FFFFFF) != 0)
#warning Chip select bounds is only configurable in 16MB increments
#endif
im->ddr.csbnds[2].csbnds =
((CONFIG_SYS_DDR_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) |
(((CONFIG_SYS_DDR_SDRAM_BASE + ddr_size - 1) >>
CSBNDS_EA_SHIFT) & CSBNDS_EA);
im->ddr.cs_config[2] = CONFIG_SYS_DDR_CS2_CONFIG;
/* currently we use only one CS, so disable the other banks */
im->ddr.cs_config[0] = 0;
im->ddr.cs_config[1] = 0;
im->ddr.cs_config[3] = 0;
im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
im->ddr.sdram_cfg =
SDRAM_CFG_SREN
#if defined(CONFIG_DDR_2T_TIMING)
| SDRAM_CFG_2T_EN
#endif
| 2 << SDRAM_CFG_SDRAM_TYPE_SHIFT;
#if defined (CONFIG_DDR_32BIT)
/* for 32-bit mode burst length is 8 */
im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE);
#endif
im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
#endif
udelay(200);
/* enable DDR controller */
im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
return msize;
}
#endif/*!CONFIG_SYS_SPD_EEPROM*/
int checkboard (void)
{
/*
* Warning: do not read the BCSR registers here
*
* There is a timing bug in the 8349E and 8349EA BCSR code
* version 1.2 (read from BCSR 11) that will cause the CFI
* flash initialization code to overwrite BCSR 0, disabling
* the serial ports and gigabit ethernet
*/
puts("Board: Freescale MPC8349EMDS\n");
return 0;
}
/*
* if MPC8349EMDS is soldered with SDRAM
*/
#if defined(CONFIG_SYS_BR2_PRELIM) \
&& defined(CONFIG_SYS_OR2_PRELIM) \
&& defined(CONFIG_SYS_LBLAWBAR2_PRELIM) \
&& defined(CONFIG_SYS_LBLAWAR2_PRELIM)
/*
* Initialize SDRAM memory on the Local Bus.
*/
void sdram_init(void)
{
volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile fsl_lbc_t *lbc = &immap->im_lbc;
uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
/*
* Setup SDRAM Base and Option Registers, already done in cpu_init.c
*/
/* setup mtrpt, lsrt and lbcr for LB bus */
lbc->lbcr = CONFIG_SYS_LBC_LBCR;
lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
lbc->lsrt = CONFIG_SYS_LBC_LSRT;
asm("sync");
/*
* Configure the SDRAM controller Machine Mode Register.
*/
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */
asm("sync");
*sdram_addr = 0xff;
udelay(100);
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2; /* 0x48636733; auto refresh */
asm("sync");
/*1 times*/
*sdram_addr = 0xff;
udelay(100);
/*2 times*/
*sdram_addr = 0xff;
udelay(100);
/*3 times*/
*sdram_addr = 0xff;
udelay(100);
/*4 times*/
*sdram_addr = 0xff;
udelay(100);
/*5 times*/
*sdram_addr = 0xff;
udelay(100);
/*6 times*/
*sdram_addr = 0xff;
udelay(100);
/*7 times*/
*sdram_addr = 0xff;
udelay(100);
/*8 times*/
*sdram_addr = 0xff;
udelay(100);
/* 0x58636733; mode register write operation */
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
asm("sync");
*sdram_addr = 0xff;
udelay(100);
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */
asm("sync");
*sdram_addr = 0xff;
udelay(100);
}
#else
void sdram_init(void)
{
}
#endif
/*
* The following are used to control the SPI chip selects for the SPI command.
*/
#ifdef CONFIG_MPC8XXX_SPI
#define SPI_CS_MASK 0x80000000
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
{
return bus == 0 && cs == 0;
}
void spi_cs_activate(struct spi_slave *slave)
{
volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
iopd->dat &= ~SPI_CS_MASK;
}
void spi_cs_deactivate(struct spi_slave *slave)
{
volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
iopd->dat |= SPI_CS_MASK;
}
#endif /* CONFIG_HARD_SPI */
#if defined(CONFIG_OF_BOARD_SETUP)
int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
return 0;
}
#endif