upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/spi/atmel_dataflash_spi.c

195 lines
5.8 KiB

/*
* Driver for ATMEL DataFlash support
* Author : Hamid Ikdoumi (Atmel)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
#include <common.h>
#ifndef CONFIG_AT91_LEGACY
# define CONFIG_AT91_LEGACY
# warning Please update to use C structure SoC access !
#endif
#include <spi.h>
#include <malloc.h>
#include <asm/io.h>
#include <asm/arch/clk.h>
#include <asm/arch/hardware.h>
#include "atmel_spi.h"
#include <asm/arch/gpio.h>
#include <asm/arch/at91_pio.h>
#include <asm/arch/at91_spi.h>
#include <dataflash.h>
#define AT91_SPI_PCS0_DATAFLASH_CARD 0xE /* Chip Select 0: NPCS0%1110 */
#define AT91_SPI_PCS1_DATAFLASH_CARD 0xD /* Chip Select 1: NPCS1%1101 */
#define AT91_SPI_PCS2_DATAFLASH_CARD 0xB /* Chip Select 2: NPCS2%1011 */
#define AT91_SPI_PCS3_DATAFLASH_CARD 0x7 /* Chip Select 3: NPCS3%0111 */
void AT91F_SpiInit(void)
{
/* Reset the SPI */
writel(AT91_SPI_SWRST, ATMEL_BASE_SPI0 + AT91_SPI_CR);
/* Configure SPI in Master Mode with No CS selected !!! */
writel(AT91_SPI_MSTR | AT91_SPI_MODFDIS | AT91_SPI_PCS,
ATMEL_BASE_SPI0 + AT91_SPI_MR);
/* Configure CS0 */
writel(AT91_SPI_NCPHA |
(AT91_SPI_DLYBS & DATAFLASH_TCSS) |
(AT91_SPI_DLYBCT & DATAFLASH_TCHS) |
((get_mck_clk_rate() / AT91_SPI_CLK) << 8),
ATMEL_BASE_SPI0 + AT91_SPI_CSR(0));
#ifdef CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1
/* Configure CS1 */
writel(AT91_SPI_NCPHA |
(AT91_SPI_DLYBS & DATAFLASH_TCSS) |
(AT91_SPI_DLYBCT & DATAFLASH_TCHS) |
((get_mck_clk_rate() / AT91_SPI_CLK) << 8),
ATMEL_BASE_SPI0 + AT91_SPI_CSR(1));
#endif
#ifdef CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS2
/* Configure CS2 */
writel(AT91_SPI_NCPHA |
(AT91_SPI_DLYBS & DATAFLASH_TCSS) |
(AT91_SPI_DLYBCT & DATAFLASH_TCHS) |
((get_mck_clk_rate() / AT91_SPI_CLK) << 8),
ATMEL_BASE_SPI0 + AT91_SPI_CSR(2));
#endif
#ifdef CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3
/* Configure CS3 */
writel(AT91_SPI_NCPHA |
(AT91_SPI_DLYBS & DATAFLASH_TCSS) |
(AT91_SPI_DLYBCT & DATAFLASH_TCHS) |
((get_mck_clk_rate() / AT91_SPI_CLK) << 8),
ATMEL_BASE_SPI0 + AT91_SPI_CSR(3));
#endif
/* SPI_Enable */
writel(AT91_SPI_SPIEN, ATMEL_BASE_SPI0 + AT91_SPI_CR);
while (!(readl(ATMEL_BASE_SPI0 + AT91_SPI_SR) & AT91_SPI_SPIENS))
;
/*
* Add tempo to get SPI in a safe state.
* Should not be needed for new silicon (Rev B)
*/
udelay(500000);
readl(ATMEL_BASE_SPI0 + AT91_SPI_SR);
readl(ATMEL_BASE_SPI0 + AT91_SPI_RDR);
}
void AT91F_SpiEnable(int cs)
{
unsigned long mode;
switch (cs) {
case 0: /* Configure SPI CS0 for Serial DataFlash AT45DBxx */
mode = readl(ATMEL_BASE_SPI0 + AT91_SPI_MR);
mode &= 0xFFF0FFFF;
writel(mode | ((AT91_SPI_PCS0_DATAFLASH_CARD<<16) & AT91_SPI_PCS),
ATMEL_BASE_SPI0 + AT91_SPI_MR);
break;
case 1: /* Configure SPI CS1 for Serial DataFlash AT45DBxx */
mode = readl(ATMEL_BASE_SPI0 + AT91_SPI_MR);
mode &= 0xFFF0FFFF;
writel(mode | ((AT91_SPI_PCS1_DATAFLASH_CARD<<16) & AT91_SPI_PCS),
ATMEL_BASE_SPI0 + AT91_SPI_MR);
break;
case 2: /* Configure SPI CS2 for Serial DataFlash AT45DBxx */
mode = readl(ATMEL_BASE_SPI0 + AT91_SPI_MR);
mode &= 0xFFF0FFFF;
writel(mode | ((AT91_SPI_PCS2_DATAFLASH_CARD<<16) & AT91_SPI_PCS),
ATMEL_BASE_SPI0 + AT91_SPI_MR);
break;
case 3:
mode = readl(ATMEL_BASE_SPI0 + AT91_SPI_MR);
mode &= 0xFFF0FFFF;
writel(mode | ((AT91_SPI_PCS3_DATAFLASH_CARD<<16) & AT91_SPI_PCS),
ATMEL_BASE_SPI0 + AT91_SPI_MR);
break;
}
/* SPI_Enable */
writel(AT91_SPI_SPIEN, ATMEL_BASE_SPI0 + AT91_SPI_CR);
}
unsigned int AT91F_SpiWrite1(AT91PS_DataflashDesc pDesc);
unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc)
{
unsigned int timeout;
unsigned int timebase;
pDesc->state = BUSY;
writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS,
ATMEL_BASE_SPI0 + AT91_SPI_PTCR);
/* Initialize the Transmit and Receive Pointer */
writel((unsigned int)pDesc->rx_cmd_pt,
ATMEL_BASE_SPI0 + AT91_SPI_RPR);
writel((unsigned int)pDesc->tx_cmd_pt,
ATMEL_BASE_SPI0 + AT91_SPI_TPR);
/* Intialize the Transmit and Receive Counters */
writel(pDesc->rx_cmd_size, ATMEL_BASE_SPI0 + AT91_SPI_RCR);
writel(pDesc->tx_cmd_size, ATMEL_BASE_SPI0 + AT91_SPI_TCR);
if (pDesc->tx_data_size != 0) {
/* Initialize the Next Transmit and Next Receive Pointer */
writel((unsigned int)pDesc->rx_data_pt,
ATMEL_BASE_SPI0 + AT91_SPI_RNPR);
writel((unsigned int)pDesc->tx_data_pt,
ATMEL_BASE_SPI0 + AT91_SPI_TNPR);
/* Intialize the Next Transmit and Next Receive Counters */
writel(pDesc->rx_data_size,
ATMEL_BASE_SPI0 + AT91_SPI_RNCR);
writel(pDesc->tx_data_size,
ATMEL_BASE_SPI0 + AT91_SPI_TNCR);
}
/* arm simple, non interrupt dependent timer */
timebase = get_timer(0);
timeout = 0;
writel(AT91_SPI_TXTEN + AT91_SPI_RXTEN,
ATMEL_BASE_SPI0 + AT91_SPI_PTCR);
while (!(readl(ATMEL_BASE_SPI0 + AT91_SPI_SR) & AT91_SPI_RXBUFF) &&
((timeout = get_timer(timebase)) < CONFIG_SYS_SPI_WRITE_TOUT))
;
writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS,
ATMEL_BASE_SPI0 + AT91_SPI_PTCR);
pDesc->state = IDLE;
if (timeout >= CONFIG_SYS_SPI_WRITE_TOUT) {
printf("Error Timeout\n\r");
return DATAFLASH_ERROR;
}
return DATAFLASH_OK;
}