upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
592 lines
16 KiB
592 lines
16 KiB
/*
|
|
* (C) Copyright 2001
|
|
* Denis Peter, MPL AG Switzerland
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <inttypes.h>
|
|
#include <pci.h>
|
|
#include <scsi.h>
|
|
|
|
#ifdef CONFIG_SCSI_DEV_LIST
|
|
#define SCSI_DEV_LIST CONFIG_SCSI_DEV_LIST
|
|
#else
|
|
#ifdef CONFIG_SCSI_SYM53C8XX
|
|
#define SCSI_VEND_ID 0x1000
|
|
#ifndef CONFIG_SCSI_DEV_ID
|
|
#define SCSI_DEV_ID 0x0001
|
|
#else
|
|
#define SCSI_DEV_ID CONFIG_SCSI_DEV_ID
|
|
#endif
|
|
#elif defined CONFIG_SATA_ULI5288
|
|
|
|
#define SCSI_VEND_ID 0x10b9
|
|
#define SCSI_DEV_ID 0x5288
|
|
|
|
#elif !defined(CONFIG_SCSI_AHCI_PLAT)
|
|
#error no scsi device defined
|
|
#endif
|
|
#define SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID}
|
|
#endif
|
|
|
|
#if defined(CONFIG_PCI) && !defined(CONFIG_SCSI_AHCI_PLAT)
|
|
const struct pci_device_id scsi_device_list[] = { SCSI_DEV_LIST };
|
|
#endif
|
|
static ccb tempccb; /* temporary scsi command buffer */
|
|
|
|
static unsigned char tempbuff[512]; /* temporary data buffer */
|
|
|
|
static int scsi_max_devs; /* number of highest available scsi device */
|
|
|
|
static int scsi_curr_dev; /* current device */
|
|
|
|
static struct blk_desc scsi_dev_desc[CONFIG_SYS_SCSI_MAX_DEVICE];
|
|
|
|
/* almost the maximum amount of the scsi_ext command.. */
|
|
#define SCSI_MAX_READ_BLK 0xFFFF
|
|
#define SCSI_LBA48_READ 0xFFFFFFF
|
|
|
|
#ifdef CONFIG_SYS_64BIT_LBA
|
|
void scsi_setup_read16(ccb *pccb, lbaint_t start, unsigned long blocks)
|
|
{
|
|
pccb->cmd[0] = SCSI_READ16;
|
|
pccb->cmd[1] = pccb->lun << 5;
|
|
pccb->cmd[2] = (unsigned char)(start >> 56) & 0xff;
|
|
pccb->cmd[3] = (unsigned char)(start >> 48) & 0xff;
|
|
pccb->cmd[4] = (unsigned char)(start >> 40) & 0xff;
|
|
pccb->cmd[5] = (unsigned char)(start >> 32) & 0xff;
|
|
pccb->cmd[6] = (unsigned char)(start >> 24) & 0xff;
|
|
pccb->cmd[7] = (unsigned char)(start >> 16) & 0xff;
|
|
pccb->cmd[8] = (unsigned char)(start >> 8) & 0xff;
|
|
pccb->cmd[9] = (unsigned char)start & 0xff;
|
|
pccb->cmd[10] = 0;
|
|
pccb->cmd[11] = (unsigned char)(blocks >> 24) & 0xff;
|
|
pccb->cmd[12] = (unsigned char)(blocks >> 16) & 0xff;
|
|
pccb->cmd[13] = (unsigned char)(blocks >> 8) & 0xff;
|
|
pccb->cmd[14] = (unsigned char)blocks & 0xff;
|
|
pccb->cmd[15] = 0;
|
|
pccb->cmdlen = 16;
|
|
pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
|
|
debug("scsi_setup_read16: cmd: %02X %02X startblk %02X%02X%02X%02X%02X%02X%02X%02X blccnt %02X%02X%02X%02X\n",
|
|
pccb->cmd[0], pccb->cmd[1],
|
|
pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5],
|
|
pccb->cmd[6], pccb->cmd[7], pccb->cmd[8], pccb->cmd[9],
|
|
pccb->cmd[11], pccb->cmd[12], pccb->cmd[13], pccb->cmd[14]);
|
|
}
|
|
#endif
|
|
|
|
void scsi_setup_read_ext(ccb *pccb, lbaint_t start, unsigned short blocks)
|
|
{
|
|
pccb->cmd[0] = SCSI_READ10;
|
|
pccb->cmd[1] = pccb->lun << 5;
|
|
pccb->cmd[2] = (unsigned char)(start >> 24) & 0xff;
|
|
pccb->cmd[3] = (unsigned char)(start >> 16) & 0xff;
|
|
pccb->cmd[4] = (unsigned char)(start >> 8) & 0xff;
|
|
pccb->cmd[5] = (unsigned char)start & 0xff;
|
|
pccb->cmd[6] = 0;
|
|
pccb->cmd[7] = (unsigned char)(blocks >> 8) & 0xff;
|
|
pccb->cmd[8] = (unsigned char)blocks & 0xff;
|
|
pccb->cmd[6] = 0;
|
|
pccb->cmdlen = 10;
|
|
pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
|
|
debug("scsi_setup_read_ext: cmd: %02X %02X startblk %02X%02X%02X%02X blccnt %02X%02X\n",
|
|
pccb->cmd[0], pccb->cmd[1],
|
|
pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5],
|
|
pccb->cmd[7], pccb->cmd[8]);
|
|
}
|
|
|
|
void scsi_setup_write_ext(ccb *pccb, lbaint_t start, unsigned short blocks)
|
|
{
|
|
pccb->cmd[0] = SCSI_WRITE10;
|
|
pccb->cmd[1] = pccb->lun << 5;
|
|
pccb->cmd[2] = (unsigned char)(start >> 24) & 0xff;
|
|
pccb->cmd[3] = (unsigned char)(start >> 16) & 0xff;
|
|
pccb->cmd[4] = (unsigned char)(start >> 8) & 0xff;
|
|
pccb->cmd[5] = (unsigned char)start & 0xff;
|
|
pccb->cmd[6] = 0;
|
|
pccb->cmd[7] = ((unsigned char)(blocks >> 8)) & 0xff;
|
|
pccb->cmd[8] = (unsigned char)blocks & 0xff;
|
|
pccb->cmd[9] = 0;
|
|
pccb->cmdlen = 10;
|
|
pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
|
|
debug("%s: cmd: %02X %02X startblk %02X%02X%02X%02X blccnt %02X%02X\n",
|
|
__func__,
|
|
pccb->cmd[0], pccb->cmd[1],
|
|
pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5],
|
|
pccb->cmd[7], pccb->cmd[8]);
|
|
}
|
|
|
|
void scsi_setup_read6(ccb *pccb, lbaint_t start, unsigned short blocks)
|
|
{
|
|
pccb->cmd[0] = SCSI_READ6;
|
|
pccb->cmd[1] = pccb->lun << 5 | ((unsigned char)(start >> 16) & 0x1f);
|
|
pccb->cmd[2] = (unsigned char)(start >> 8) & 0xff;
|
|
pccb->cmd[3] = (unsigned char)start & 0xff;
|
|
pccb->cmd[4] = (unsigned char)blocks & 0xff;
|
|
pccb->cmd[5] = 0;
|
|
pccb->cmdlen = 6;
|
|
pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
|
|
debug("scsi_setup_read6: cmd: %02X %02X startblk %02X%02X blccnt %02X\n",
|
|
pccb->cmd[0], pccb->cmd[1],
|
|
pccb->cmd[2], pccb->cmd[3], pccb->cmd[4]);
|
|
}
|
|
|
|
|
|
void scsi_setup_inquiry(ccb *pccb)
|
|
{
|
|
pccb->cmd[0] = SCSI_INQUIRY;
|
|
pccb->cmd[1] = pccb->lun << 5;
|
|
pccb->cmd[2] = 0;
|
|
pccb->cmd[3] = 0;
|
|
if (pccb->datalen > 255)
|
|
pccb->cmd[4] = 255;
|
|
else
|
|
pccb->cmd[4] = (unsigned char)pccb->datalen;
|
|
pccb->cmd[5] = 0;
|
|
pccb->cmdlen = 6;
|
|
pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
|
|
}
|
|
|
|
#ifdef CONFIG_BLK
|
|
static ulong scsi_read(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt,
|
|
void *buffer)
|
|
#else
|
|
static ulong scsi_read(struct blk_desc *block_dev, lbaint_t blknr,
|
|
lbaint_t blkcnt, void *buffer)
|
|
#endif
|
|
{
|
|
#ifdef CONFIG_BLK
|
|
struct blk_desc *block_dev = dev_get_uclass_platdata(dev);
|
|
#endif
|
|
int device = block_dev->devnum;
|
|
lbaint_t start, blks;
|
|
uintptr_t buf_addr;
|
|
unsigned short smallblks = 0;
|
|
ccb *pccb = (ccb *)&tempccb;
|
|
device &= 0xff;
|
|
|
|
/* Setup device */
|
|
pccb->target = scsi_dev_desc[device].target;
|
|
pccb->lun = scsi_dev_desc[device].lun;
|
|
buf_addr = (unsigned long)buffer;
|
|
start = blknr;
|
|
blks = blkcnt;
|
|
debug("\nscsi_read: dev %d startblk " LBAF
|
|
", blccnt " LBAF " buffer %lx\n",
|
|
device, start, blks, (unsigned long)buffer);
|
|
do {
|
|
pccb->pdata = (unsigned char *)buf_addr;
|
|
#ifdef CONFIG_SYS_64BIT_LBA
|
|
if (start > SCSI_LBA48_READ) {
|
|
unsigned long blocks;
|
|
blocks = min_t(lbaint_t, blks, SCSI_MAX_READ_BLK);
|
|
pccb->datalen = scsi_dev_desc[device].blksz * blocks;
|
|
scsi_setup_read16(pccb, start, blocks);
|
|
start += blocks;
|
|
blks -= blocks;
|
|
} else
|
|
#endif
|
|
if (blks > SCSI_MAX_READ_BLK) {
|
|
pccb->datalen = scsi_dev_desc[device].blksz *
|
|
SCSI_MAX_READ_BLK;
|
|
smallblks = SCSI_MAX_READ_BLK;
|
|
scsi_setup_read_ext(pccb, start, smallblks);
|
|
start += SCSI_MAX_READ_BLK;
|
|
blks -= SCSI_MAX_READ_BLK;
|
|
} else {
|
|
pccb->datalen = scsi_dev_desc[device].blksz * blks;
|
|
smallblks = (unsigned short)blks;
|
|
scsi_setup_read_ext(pccb, start, smallblks);
|
|
start += blks;
|
|
blks = 0;
|
|
}
|
|
debug("scsi_read_ext: startblk " LBAF
|
|
", blccnt %x buffer %" PRIXPTR "\n",
|
|
start, smallblks, buf_addr);
|
|
if (scsi_exec(pccb) != true) {
|
|
scsi_print_error(pccb);
|
|
blkcnt -= blks;
|
|
break;
|
|
}
|
|
buf_addr += pccb->datalen;
|
|
} while (blks != 0);
|
|
debug("scsi_read_ext: end startblk " LBAF
|
|
", blccnt %x buffer %" PRIXPTR "\n", start, smallblks, buf_addr);
|
|
return blkcnt;
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* scsi_write
|
|
*/
|
|
|
|
/* Almost the maximum amount of the scsi_ext command.. */
|
|
#define SCSI_MAX_WRITE_BLK 0xFFFF
|
|
|
|
#ifdef CONFIG_BLK
|
|
static ulong scsi_write(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt,
|
|
const void *buffer)
|
|
#else
|
|
static ulong scsi_write(struct blk_desc *block_dev, lbaint_t blknr,
|
|
lbaint_t blkcnt, const void *buffer)
|
|
#endif
|
|
{
|
|
#ifdef CONFIG_BLK
|
|
struct blk_desc *block_dev = dev_get_uclass_platdata(dev);
|
|
#endif
|
|
int device = block_dev->devnum;
|
|
lbaint_t start, blks;
|
|
uintptr_t buf_addr;
|
|
unsigned short smallblks;
|
|
ccb *pccb = (ccb *)&tempccb;
|
|
|
|
device &= 0xff;
|
|
|
|
/* Setup device */
|
|
pccb->target = scsi_dev_desc[device].target;
|
|
pccb->lun = scsi_dev_desc[device].lun;
|
|
buf_addr = (unsigned long)buffer;
|
|
start = blknr;
|
|
blks = blkcnt;
|
|
debug("\n%s: dev %d startblk " LBAF ", blccnt " LBAF " buffer %lx\n",
|
|
__func__, device, start, blks, (unsigned long)buffer);
|
|
do {
|
|
pccb->pdata = (unsigned char *)buf_addr;
|
|
if (blks > SCSI_MAX_WRITE_BLK) {
|
|
pccb->datalen = (scsi_dev_desc[device].blksz *
|
|
SCSI_MAX_WRITE_BLK);
|
|
smallblks = SCSI_MAX_WRITE_BLK;
|
|
scsi_setup_write_ext(pccb, start, smallblks);
|
|
start += SCSI_MAX_WRITE_BLK;
|
|
blks -= SCSI_MAX_WRITE_BLK;
|
|
} else {
|
|
pccb->datalen = scsi_dev_desc[device].blksz * blks;
|
|
smallblks = (unsigned short)blks;
|
|
scsi_setup_write_ext(pccb, start, smallblks);
|
|
start += blks;
|
|
blks = 0;
|
|
}
|
|
debug("%s: startblk " LBAF ", blccnt %x buffer %" PRIXPTR "\n",
|
|
__func__, start, smallblks, buf_addr);
|
|
if (scsi_exec(pccb) != true) {
|
|
scsi_print_error(pccb);
|
|
blkcnt -= blks;
|
|
break;
|
|
}
|
|
buf_addr += pccb->datalen;
|
|
} while (blks != 0);
|
|
debug("%s: end startblk " LBAF ", blccnt %x buffer %" PRIXPTR "\n",
|
|
__func__, start, smallblks, buf_addr);
|
|
return blkcnt;
|
|
}
|
|
|
|
int scsi_get_disk_count(void)
|
|
{
|
|
return scsi_max_devs;
|
|
}
|
|
|
|
#if defined(CONFIG_PCI) && !defined(CONFIG_SCSI_AHCI_PLAT)
|
|
void scsi_init(void)
|
|
{
|
|
int busdevfunc = -1;
|
|
int i;
|
|
/*
|
|
* Find a device from the list, this driver will support a single
|
|
* controller.
|
|
*/
|
|
for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) {
|
|
/* get PCI Device ID */
|
|
#ifdef CONFIG_DM_PCI
|
|
struct udevice *dev;
|
|
int ret;
|
|
|
|
ret = dm_pci_find_device(scsi_device_list[i].vendor,
|
|
scsi_device_list[i].device, 0, &dev);
|
|
if (!ret) {
|
|
busdevfunc = dm_pci_get_bdf(dev);
|
|
break;
|
|
}
|
|
#else
|
|
busdevfunc = pci_find_device(scsi_device_list[i].vendor,
|
|
scsi_device_list[i].device,
|
|
0);
|
|
#endif
|
|
if (busdevfunc != -1)
|
|
break;
|
|
}
|
|
|
|
if (busdevfunc == -1) {
|
|
printf("Error: SCSI Controller(s) ");
|
|
for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) {
|
|
printf("%04X:%04X ",
|
|
scsi_device_list[i].vendor,
|
|
scsi_device_list[i].device);
|
|
}
|
|
printf("not found\n");
|
|
return;
|
|
}
|
|
#ifdef DEBUG
|
|
else {
|
|
printf("SCSI Controller (%04X,%04X) found (%d:%d:%d)\n",
|
|
scsi_device_list[i].vendor,
|
|
scsi_device_list[i].device,
|
|
(busdevfunc >> 16) & 0xFF,
|
|
(busdevfunc >> 11) & 0x1F,
|
|
(busdevfunc >> 8) & 0x7);
|
|
}
|
|
#endif
|
|
bootstage_start(BOOTSTAGE_ID_ACCUM_SCSI, "ahci");
|
|
scsi_low_level_init(busdevfunc);
|
|
scsi_scan(1);
|
|
bootstage_accum(BOOTSTAGE_ID_ACCUM_SCSI);
|
|
}
|
|
#endif
|
|
|
|
/* copy src to dest, skipping leading and trailing blanks
|
|
* and null terminate the string
|
|
*/
|
|
void scsi_ident_cpy(unsigned char *dest, unsigned char *src, unsigned int len)
|
|
{
|
|
int start, end;
|
|
|
|
start = 0;
|
|
while (start < len) {
|
|
if (src[start] != ' ')
|
|
break;
|
|
start++;
|
|
}
|
|
end = len-1;
|
|
while (end > start) {
|
|
if (src[end] != ' ')
|
|
break;
|
|
end--;
|
|
}
|
|
for (; start <= end; start++)
|
|
*dest ++= src[start];
|
|
*dest = '\0';
|
|
}
|
|
|
|
|
|
/* Trim trailing blanks, and NUL-terminate string
|
|
*/
|
|
void scsi_trim_trail(unsigned char *str, unsigned int len)
|
|
{
|
|
unsigned char *p = str + len - 1;
|
|
|
|
while (len-- > 0) {
|
|
*p-- = '\0';
|
|
if (*p != ' ')
|
|
return;
|
|
}
|
|
}
|
|
|
|
int scsi_read_capacity(ccb *pccb, lbaint_t *capacity, unsigned long *blksz)
|
|
{
|
|
*capacity = 0;
|
|
|
|
memset(pccb->cmd, '\0', sizeof(pccb->cmd));
|
|
pccb->cmd[0] = SCSI_RD_CAPAC10;
|
|
pccb->cmd[1] = pccb->lun << 5;
|
|
pccb->cmdlen = 10;
|
|
pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
|
|
|
|
pccb->datalen = 8;
|
|
if (scsi_exec(pccb) != true)
|
|
return 1;
|
|
|
|
*capacity = ((lbaint_t)pccb->pdata[0] << 24) |
|
|
((lbaint_t)pccb->pdata[1] << 16) |
|
|
((lbaint_t)pccb->pdata[2] << 8) |
|
|
((lbaint_t)pccb->pdata[3]);
|
|
|
|
if (*capacity != 0xffffffff) {
|
|
/* Read capacity (10) was sufficient for this drive. */
|
|
*blksz = ((unsigned long)pccb->pdata[4] << 24) |
|
|
((unsigned long)pccb->pdata[5] << 16) |
|
|
((unsigned long)pccb->pdata[6] << 8) |
|
|
((unsigned long)pccb->pdata[7]);
|
|
return 0;
|
|
}
|
|
|
|
/* Read capacity (10) was insufficient. Use read capacity (16). */
|
|
memset(pccb->cmd, '\0', sizeof(pccb->cmd));
|
|
pccb->cmd[0] = SCSI_RD_CAPAC16;
|
|
pccb->cmd[1] = 0x10;
|
|
pccb->cmdlen = 16;
|
|
pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
|
|
|
|
pccb->datalen = 16;
|
|
if (scsi_exec(pccb) != true)
|
|
return 1;
|
|
|
|
*capacity = ((uint64_t)pccb->pdata[0] << 56) |
|
|
((uint64_t)pccb->pdata[1] << 48) |
|
|
((uint64_t)pccb->pdata[2] << 40) |
|
|
((uint64_t)pccb->pdata[3] << 32) |
|
|
((uint64_t)pccb->pdata[4] << 24) |
|
|
((uint64_t)pccb->pdata[5] << 16) |
|
|
((uint64_t)pccb->pdata[6] << 8) |
|
|
((uint64_t)pccb->pdata[7]);
|
|
|
|
*blksz = ((uint64_t)pccb->pdata[8] << 56) |
|
|
((uint64_t)pccb->pdata[9] << 48) |
|
|
((uint64_t)pccb->pdata[10] << 40) |
|
|
((uint64_t)pccb->pdata[11] << 32) |
|
|
((uint64_t)pccb->pdata[12] << 24) |
|
|
((uint64_t)pccb->pdata[13] << 16) |
|
|
((uint64_t)pccb->pdata[14] << 8) |
|
|
((uint64_t)pccb->pdata[15]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* Some setup (fill-in) routines
|
|
*/
|
|
void scsi_setup_test_unit_ready(ccb *pccb)
|
|
{
|
|
pccb->cmd[0] = SCSI_TST_U_RDY;
|
|
pccb->cmd[1] = pccb->lun << 5;
|
|
pccb->cmd[2] = 0;
|
|
pccb->cmd[3] = 0;
|
|
pccb->cmd[4] = 0;
|
|
pccb->cmd[5] = 0;
|
|
pccb->cmdlen = 6;
|
|
pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
|
|
}
|
|
|
|
/*
|
|
* (re)-scan the scsi bus and reports scsi device info
|
|
* to the user if mode = 1
|
|
*/
|
|
void scsi_scan(int mode)
|
|
{
|
|
unsigned char i, perq, modi, lun;
|
|
lbaint_t capacity;
|
|
unsigned long blksz;
|
|
ccb *pccb = (ccb *)&tempccb;
|
|
|
|
if (mode == 1)
|
|
printf("scanning bus for devices...\n");
|
|
for (i = 0; i < CONFIG_SYS_SCSI_MAX_DEVICE; i++) {
|
|
scsi_dev_desc[i].target = 0xff;
|
|
scsi_dev_desc[i].lun = 0xff;
|
|
scsi_dev_desc[i].lba = 0;
|
|
scsi_dev_desc[i].blksz = 0;
|
|
scsi_dev_desc[i].log2blksz =
|
|
LOG2_INVALID(typeof(scsi_dev_desc[i].log2blksz));
|
|
scsi_dev_desc[i].type = DEV_TYPE_UNKNOWN;
|
|
scsi_dev_desc[i].vendor[0] = 0;
|
|
scsi_dev_desc[i].product[0] = 0;
|
|
scsi_dev_desc[i].revision[0] = 0;
|
|
scsi_dev_desc[i].removable = false;
|
|
scsi_dev_desc[i].if_type = IF_TYPE_SCSI;
|
|
scsi_dev_desc[i].devnum = i;
|
|
scsi_dev_desc[i].part_type = PART_TYPE_UNKNOWN;
|
|
#ifndef CONFIG_BLK
|
|
scsi_dev_desc[i].block_read = scsi_read;
|
|
scsi_dev_desc[i].block_write = scsi_write;
|
|
#endif
|
|
}
|
|
scsi_max_devs = 0;
|
|
for (i = 0; i < CONFIG_SYS_SCSI_MAX_SCSI_ID; i++) {
|
|
pccb->target = i;
|
|
for (lun = 0; lun < CONFIG_SYS_SCSI_MAX_LUN; lun++) {
|
|
pccb->lun = lun;
|
|
pccb->pdata = (unsigned char *)&tempbuff;
|
|
pccb->datalen = 512;
|
|
scsi_setup_inquiry(pccb);
|
|
if (scsi_exec(pccb) != true) {
|
|
if (pccb->contr_stat == SCSI_SEL_TIME_OUT) {
|
|
/*
|
|
* selection timeout => assuming no
|
|
* device present
|
|
*/
|
|
debug("Selection timeout ID %d\n",
|
|
pccb->target);
|
|
continue;
|
|
}
|
|
scsi_print_error(pccb);
|
|
continue;
|
|
}
|
|
perq = tempbuff[0];
|
|
modi = tempbuff[1];
|
|
if ((perq & 0x1f) == 0x1f)
|
|
continue; /* skip unknown devices */
|
|
if ((modi & 0x80) == 0x80) /* drive is removable */
|
|
scsi_dev_desc[scsi_max_devs].removable = true;
|
|
/* get info for this device */
|
|
scsi_ident_cpy((unsigned char *)&scsi_dev_desc
|
|
[scsi_max_devs].vendor[0],
|
|
&tempbuff[8], 8);
|
|
scsi_ident_cpy((unsigned char *)&scsi_dev_desc
|
|
[scsi_max_devs].product[0],
|
|
&tempbuff[16], 16);
|
|
scsi_ident_cpy((unsigned char *)&scsi_dev_desc
|
|
[scsi_max_devs].revision[0],
|
|
&tempbuff[32], 4);
|
|
scsi_dev_desc[scsi_max_devs].target = pccb->target;
|
|
scsi_dev_desc[scsi_max_devs].lun = pccb->lun;
|
|
|
|
pccb->datalen = 0;
|
|
scsi_setup_test_unit_ready(pccb);
|
|
if (scsi_exec(pccb) != true) {
|
|
if (scsi_dev_desc[scsi_max_devs].removable) {
|
|
scsi_dev_desc[scsi_max_devs].type =
|
|
perq;
|
|
goto removable;
|
|
}
|
|
scsi_print_error(pccb);
|
|
continue;
|
|
}
|
|
if (scsi_read_capacity(pccb, &capacity, &blksz)) {
|
|
scsi_print_error(pccb);
|
|
continue;
|
|
}
|
|
scsi_dev_desc[scsi_max_devs].lba = capacity;
|
|
scsi_dev_desc[scsi_max_devs].blksz = blksz;
|
|
scsi_dev_desc[scsi_max_devs].log2blksz =
|
|
LOG2(scsi_dev_desc[scsi_max_devs].blksz);
|
|
scsi_dev_desc[scsi_max_devs].type = perq;
|
|
part_init(&scsi_dev_desc[scsi_max_devs]);
|
|
removable:
|
|
if (mode == 1) {
|
|
printf(" Device %d: ", scsi_max_devs);
|
|
dev_print(&scsi_dev_desc[scsi_max_devs]);
|
|
} /* if mode */
|
|
scsi_max_devs++;
|
|
} /* next LUN */
|
|
}
|
|
if (scsi_max_devs > 0)
|
|
scsi_curr_dev = 0;
|
|
else
|
|
scsi_curr_dev = -1;
|
|
|
|
printf("Found %d device(s).\n", scsi_max_devs);
|
|
#ifndef CONFIG_SPL_BUILD
|
|
setenv_ulong("scsidevs", scsi_max_devs);
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_BLK
|
|
static const struct blk_ops scsi_blk_ops = {
|
|
.read = scsi_read,
|
|
.write = scsi_write,
|
|
};
|
|
|
|
U_BOOT_DRIVER(scsi_blk) = {
|
|
.name = "scsi_blk",
|
|
.id = UCLASS_BLK,
|
|
.ops = &scsi_blk_ops,
|
|
};
|
|
#else
|
|
U_BOOT_LEGACY_BLK(scsi) = {
|
|
.if_typename = "sata",
|
|
.if_type = IF_TYPE_SCSI,
|
|
.max_devs = CONFIG_SYS_SCSI_MAX_DEVICE,
|
|
.desc = scsi_dev_desc,
|
|
};
|
|
#endif
|
|
|