upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/arm/mach-uniphier/ph1-pro4/pll_init.c

151 lines
3.4 KiB

/*
* Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <linux/io.h>
#include <mach/sc-regs.h>
#include <mach/sg-regs.h>
#undef DPLL_SSC_RATE_1PER
static void dpll_init(void)
{
u32 tmp;
/*
* Set Frequency
* Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz)
* to FOUT ( DPLLCTRL.bit[29:20] )
*/
tmp = readl(SC_DPLLCTRL);
tmp &= ~(0x000f0000);
#if CONFIG_DDR_FREQ == 1600
tmp |= 0x000c0000;
#elif CONFIG_DDR_FREQ == 1333
tmp |= 0x000d0000;
#else
# error "Unsupported frequency"
#endif
/*
* Set Moduration rate
* Set 0x0(1%)/0x1(2%) to SSC_RATE(DPLLCTRL.bit[15])
*/
#if defined(DPLL_SSC_RATE_1PER)
tmp &= ~0x00008000;
#else
tmp |= 0x00008000;
#endif
writel(tmp, SC_DPLLCTRL);
tmp = readl(SC_DPLLCTRL2);
tmp |= SC_DPLLCTRL2_NRSTDS;
writel(tmp, SC_DPLLCTRL2);
}
static void vpll_init(void)
{
u32 tmp, clk_mode_axosel;
/* Set VPLL27A & VPLL27B */
tmp = readl(SG_PINMON0);
clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
#if defined(CONFIG_MACH_PH1_PRO4)
/* 25MHz or 6.25MHz is default for Pro4R, no need to set VPLLA/B */
if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ ||
clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ)
return;
#endif
/* Disable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */
tmp = readl(SC_VPLL27ACTRL);
tmp |= 0x00000001;
writel(tmp, SC_VPLL27ACTRL);
tmp = readl(SC_VPLL27BCTRL);
tmp |= 0x00000001;
writel(tmp, SC_VPLL27BCTRL);
/* Unset VPLA_K_LD and VPLB_K_LD bit */
tmp = readl(SC_VPLL27ACTRL3);
tmp &= ~0x10000000;
writel(tmp, SC_VPLL27ACTRL3);
tmp = readl(SC_VPLL27BCTRL3);
tmp &= ~0x10000000;
writel(tmp, SC_VPLL27BCTRL3);
/* Set VPLA_M and VPLB_M to 0x20 */
tmp = readl(SC_VPLL27ACTRL2);
tmp &= ~0x0000007f;
tmp |= 0x00000020;
writel(tmp, SC_VPLL27ACTRL2);
tmp = readl(SC_VPLL27BCTRL2);
tmp &= ~0x0000007f;
tmp |= 0x00000020;
writel(tmp, SC_VPLL27BCTRL2);
if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ ||
clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) {
/* Set VPLA_K and VPLB_K for AXO: 25MHz */
tmp = readl(SC_VPLL27ACTRL3);
tmp &= ~0x000fffff;
tmp |= 0x00066666;
writel(tmp, SC_VPLL27ACTRL3);
tmp = readl(SC_VPLL27BCTRL3);
tmp &= ~0x000fffff;
tmp |= 0x00066666;
writel(tmp, SC_VPLL27BCTRL3);
} else {
/* Set VPLA_K and VPLB_K for AXO: 24.576 MHz */
tmp = readl(SC_VPLL27ACTRL3);
tmp &= ~0x000fffff;
tmp |= 0x000f5800;
writel(tmp, SC_VPLL27ACTRL3);
tmp = readl(SC_VPLL27BCTRL3);
tmp &= ~0x000fffff;
tmp |= 0x000f5800;
writel(tmp, SC_VPLL27BCTRL3);
}
/* wait 1 usec */
udelay(1);
/* Set VPLA_K_LD and VPLB_K_LD to load K parameters */
tmp = readl(SC_VPLL27ACTRL3);
tmp |= 0x10000000;
writel(tmp, SC_VPLL27ACTRL3);
tmp = readl(SC_VPLL27BCTRL3);
tmp |= 0x10000000;
writel(tmp, SC_VPLL27BCTRL3);
/* Unset VPLA_SNRST and VPLB_SNRST bit */
tmp = readl(SC_VPLL27ACTRL2);
tmp |= 0x10000000;
writel(tmp, SC_VPLL27ACTRL2);
tmp = readl(SC_VPLL27BCTRL2);
tmp |= 0x10000000;
writel(tmp, SC_VPLL27BCTRL2);
/* Enable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */
tmp = readl(SC_VPLL27ACTRL);
tmp &= ~0x00000001;
writel(tmp, SC_VPLL27ACTRL);
tmp = readl(SC_VPLL27BCTRL);
tmp &= ~0x00000001;
writel(tmp, SC_VPLL27BCTRL);
}
void pll_init(void)
{
dpll_init();
vpll_init();
/*
* Wait 500 usec until dpll get stable
* We wait 1 usec in vpll_init() so 1 usec can be saved here.
*/
udelay(499);
}