upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/usb/host/ehci-mxc.c

249 lines
6.2 KiB

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
*/
#include <common.h>
#include <usb.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <usb/ehci-ci.h>
#include <errno.h>
#include "ehci.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
#define MX25_OTG_SIC_SHIFT 29
#define MX25_OTG_SIC_MASK (0x3 << MX25_OTG_SIC_SHIFT)
#define MX25_OTG_PM_BIT (1 << 24)
#define MX25_OTG_PP_BIT (1 << 11)
#define MX25_OTG_OCPOL_BIT (1 << 3)
#define MX25_H1_SIC_SHIFT 21
#define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT)
#define MX25_H1_PP_BIT (1 << 18)
#define MX25_H1_PM_BIT (1 << 16)
#define MX25_H1_IPPUE_UP_BIT (1 << 7)
#define MX25_H1_IPPUE_DOWN_BIT (1 << 6)
#define MX25_H1_TLL_BIT (1 << 5)
#define MX25_H1_USBTE_BIT (1 << 4)
#define MX25_H1_OCPOL_BIT (1 << 2)
#define MX31_OTG_SIC_SHIFT 29
#define MX31_OTG_SIC_MASK (0x3 << MX31_OTG_SIC_SHIFT)
#define MX31_OTG_PM_BIT (1 << 24)
#define MX31_H2_SIC_SHIFT 21
#define MX31_H2_SIC_MASK (0x3 << MX31_H2_SIC_SHIFT)
#define MX31_H2_PM_BIT (1 << 16)
#define MX31_H2_DT_BIT (1 << 5)
#define MX31_H1_SIC_SHIFT 13
#define MX31_H1_SIC_MASK (0x3 << MX31_H1_SIC_SHIFT)
#define MX31_H1_PM_BIT (1 << 8)
#define MX31_H1_DT_BIT (1 << 4)
#define MX35_OTG_SIC_SHIFT 29
#define MX35_OTG_SIC_MASK (0x3 << MX35_OTG_SIC_SHIFT)
#define MX35_OTG_PM_BIT (1 << 24)
#define MX35_OTG_PP_BIT (1 << 11)
#define MX35_OTG_OCPOL_BIT (1 << 3)
#define MX35_H1_SIC_SHIFT 21
#define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT)
#define MX35_H1_PP_BIT (1 << 18)
#define MX35_H1_PM_BIT (1 << 16)
#define MX35_H1_IPPUE_UP_BIT (1 << 7)
#define MX35_H1_IPPUE_DOWN_BIT (1 << 6)
#define MX35_H1_TLL_BIT (1 << 5)
#define MX35_H1_USBTE_BIT (1 << 4)
#define MX35_H1_OCPOL_BIT (1 << 2)
static int mxc_set_usbcontrol(int port, unsigned int flags)
{
unsigned int v;
v = readl(IMX_USB_BASE + USBCTRL_OTGBASE_OFFSET);
#if defined(CONFIG_MX25)
switch (port) {
case 0: /* OTG port */
v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT | MX25_OTG_PP_BIT |
MX25_OTG_OCPOL_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX25_OTG_PM_BIT;
if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
v |= MX25_OTG_PP_BIT;
if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
v |= MX25_OTG_OCPOL_BIT;
break;
case 1: /* H1 port */
v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_PP_BIT |
MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT |
MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT |
MX25_H1_IPPUE_UP_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX25_H1_PM_BIT;
if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
v |= MX25_H1_PP_BIT;
if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
v |= MX25_H1_OCPOL_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX25_H1_TLL_BIT;
if (flags & MXC_EHCI_INTERNAL_PHY)
v |= MX25_H1_USBTE_BIT;
if (flags & MXC_EHCI_IPPUE_DOWN)
v |= MX25_H1_IPPUE_DOWN_BIT;
if (flags & MXC_EHCI_IPPUE_UP)
v |= MX25_H1_IPPUE_UP_BIT;
break;
default:
return -EINVAL;
}
#elif defined(CONFIG_MX31)
switch (port) {
case 0: /* OTG port */
v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_OTG_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX31_OTG_PM_BIT;
break;
case 1: /* H1 port */
v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H1_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX31_H1_PM_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX31_H1_DT_BIT;
break;
case 2: /* H2 port */
v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H2_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX31_H2_PM_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX31_H2_DT_BIT;
break;
default:
return -EINVAL;
}
#elif defined(CONFIG_MX35)
switch (port) {
case 0: /* OTG port */
v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT | MX35_OTG_PP_BIT |
MX35_OTG_OCPOL_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_OTG_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX35_OTG_PM_BIT;
if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
v |= MX35_OTG_PP_BIT;
if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
v |= MX35_OTG_OCPOL_BIT;
break;
case 1: /* H1 port */
v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_PP_BIT |
MX35_H1_OCPOL_BIT | MX35_H1_TLL_BIT |
MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT |
MX35_H1_IPPUE_UP_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_H1_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX35_H1_PM_BIT;
if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
v |= MX35_H1_PP_BIT;
if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
v |= MX35_H1_OCPOL_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX35_H1_TLL_BIT;
if (flags & MXC_EHCI_INTERNAL_PHY)
v |= MX35_H1_USBTE_BIT;
if (flags & MXC_EHCI_IPPUE_DOWN)
v |= MX35_H1_IPPUE_DOWN_BIT;
if (flags & MXC_EHCI_IPPUE_UP)
v |= MX35_H1_IPPUE_UP_BIT;
break;
default:
return -EINVAL;
}
#else
#error MXC EHCI USB driver not supported on this platform
#endif
writel(v, IMX_USB_BASE + USBCTRL_OTGBASE_OFFSET);
return 0;
}
int ehci_hcd_init(int index, enum usb_init_type init,
struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
struct usb_ehci *ehci;
#ifdef CONFIG_MX31
struct clock_control_regs *sc_regs =
(struct clock_control_regs *)CCM_BASE;
__raw_readl(&sc_regs->ccmr);
__raw_writel(__raw_readl(&sc_regs->ccmr) | (1 << 9), &sc_regs->ccmr) ;
#endif
udelay(80);
ehci = (struct usb_ehci *)(IMX_USB_BASE +
IMX_USB_PORT_OFFSET * CONFIG_MXC_USB_PORT);
*hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
*hcor = (struct ehci_hcor *)((uint32_t) *hccr +
HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
setbits_le32(&ehci->usbmode, CM_HOST);
__raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
mxc_set_usbcontrol(CONFIG_MXC_USB_PORT, CONFIG_MXC_USB_FLAGS);
#ifdef CONFIG_MX35
/* Workaround for ENGcm11601 */
__raw_writel(0, &ehci->sbuscfg);
#endif
udelay(10000);
return 0;
}
/*
* Destroy the appropriate control structures corresponding
* the the EHCI host controller.
*/
int ehci_hcd_stop(int index)
{
return 0;
}