upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
700 lines
17 KiB
700 lines
17 KiB
/*
|
|
* (C) Copyright 2001
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <mpc8xx.h>
|
|
|
|
#if defined(CONFIG_ENV_IS_IN_FLASH)
|
|
# ifndef CONFIG_ENV_ADDR
|
|
# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
|
|
# endif
|
|
# ifndef CONFIG_ENV_SIZE
|
|
# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
|
|
# endif
|
|
# ifndef CONFIG_ENV_SECT_SIZE
|
|
# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
|
|
# endif
|
|
#endif
|
|
|
|
/*---------------------------------------------------------------------*/
|
|
#undef DEBUG_FLASH
|
|
|
|
#ifdef DEBUG_FLASH
|
|
#define DEBUGF(fmt,args...) printf(fmt ,##args)
|
|
#else
|
|
#define DEBUGF(fmt,args...)
|
|
#endif
|
|
/*---------------------------------------------------------------------*/
|
|
|
|
|
|
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Functions
|
|
*/
|
|
static ulong flash_get_size (vu_long *addr, flash_info_t *info);
|
|
static int write_data (flash_info_t *info, ulong dest, ulong data);
|
|
static void flash_get_offsets (ulong base, flash_info_t *info);
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*
|
|
* The PCU E uses an address map where flash banks are aligned top
|
|
* down, so that the "first" flash bank ends at top of memory, and
|
|
* the monitor entry point is at address (0xFFF00100). The second
|
|
* flash bank is mapped immediately below bank 0.
|
|
*
|
|
* This is NOT in conformance to the "official" memory map!
|
|
*
|
|
*/
|
|
|
|
#define PCU_MONITOR_BASE ( (flash_info[0].start[0] + flash_info[0].size - 1) \
|
|
- (0xFFFFFFFF - CONFIG_SYS_MONITOR_BASE) )
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
unsigned long flash_init (void)
|
|
{
|
|
volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
|
|
volatile memctl8xx_t *memctl = &immap->im_memctl;
|
|
unsigned long base, size_b0, size_b1;
|
|
int i;
|
|
|
|
/* Init: no FLASHes known */
|
|
for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
|
|
flash_info[i].flash_id = FLASH_UNKNOWN;
|
|
}
|
|
|
|
/* Static FLASH Bank configuration here - FIXME XXX */
|
|
|
|
/*
|
|
* Warning:
|
|
*
|
|
* Since the PCU E memory map assigns flash banks top down,
|
|
* we swap the numbering later if both banks are equipped,
|
|
* so they look like a contiguous area of memory.
|
|
*/
|
|
DEBUGF("\n## Get flash bank 1 size @ 0x%08x\n",FLASH_BASE0_PRELIM);
|
|
|
|
size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
|
|
|
|
if (flash_info[0].flash_id == FLASH_UNKNOWN) {
|
|
printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
|
|
size_b0, size_b0<<20);
|
|
}
|
|
|
|
DEBUGF("## Get flash bank 2 size @ 0x%08x\n",FLASH_BASE6_PRELIM);
|
|
size_b1 = flash_get_size((vu_long *)FLASH_BASE6_PRELIM, &flash_info[1]);
|
|
|
|
DEBUGF("## Prelim. Flash bank sizes: %08lx + 0x%08lx\n", size_b0, size_b1);
|
|
|
|
if (size_b1 > size_b0) {
|
|
printf ("## ERROR: "
|
|
"Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n",
|
|
size_b1, size_b1<<20,
|
|
size_b0, size_b0<<20
|
|
);
|
|
flash_info[0].flash_id = FLASH_UNKNOWN;
|
|
flash_info[1].flash_id = FLASH_UNKNOWN;
|
|
flash_info[0].sector_count = -1;
|
|
flash_info[1].sector_count = -1;
|
|
flash_info[0].size = 0;
|
|
flash_info[1].size = 0;
|
|
return (0);
|
|
}
|
|
|
|
DEBUGF ("## Before remap: "
|
|
"BR0: 0x%08x OR0: 0x%08x "
|
|
"BR6: 0x%08x OR6: 0x%08x\n",
|
|
memctl->memc_br0, memctl->memc_or0,
|
|
memctl->memc_br6, memctl->memc_or6);
|
|
|
|
/* Remap FLASH according to real size */
|
|
base = 0 - size_b0;
|
|
memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
|
|
memctl->memc_br0 = (base & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V;
|
|
|
|
DEBUGF("## BR0: 0x%08x OR0: 0x%08x\n",
|
|
memctl->memc_br0, memctl->memc_or0);
|
|
|
|
/* Re-do sizing to get full correct info */
|
|
size_b0 = flash_get_size((vu_long *)base, &flash_info[0]);
|
|
base = 0 - size_b0;
|
|
|
|
flash_info[0].size = size_b0;
|
|
|
|
flash_get_offsets (base, &flash_info[0]);
|
|
|
|
/* monitor protection ON by default */
|
|
flash_protect(FLAG_PROTECT_SET,
|
|
PCU_MONITOR_BASE,
|
|
PCU_MONITOR_BASE+monitor_flash_len-1,
|
|
&flash_info[0]);
|
|
|
|
#ifdef CONFIG_ENV_IS_IN_FLASH
|
|
/* ENV protection ON by default */
|
|
flash_protect(FLAG_PROTECT_SET,
|
|
CONFIG_ENV_ADDR,
|
|
CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
|
|
&flash_info[0]);
|
|
#endif
|
|
|
|
if (size_b1) {
|
|
flash_info_t tmp_info;
|
|
|
|
memctl->memc_or6 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
|
|
memctl->memc_br6 = ((base - size_b1) & BR_BA_MSK) |
|
|
BR_PS_16 | BR_MS_GPCM | BR_V;
|
|
|
|
DEBUGF("## New BR6: 0x%08x OR6: 0x%08x\n",
|
|
memctl->memc_br6, memctl->memc_or6);
|
|
|
|
/* Re-do sizing to get full correct info */
|
|
size_b1 = flash_get_size((vu_long *)(base - size_b1),
|
|
&flash_info[1]);
|
|
base -= size_b1;
|
|
|
|
flash_get_offsets (base, &flash_info[1]);
|
|
|
|
flash_info[1].size = size_b1;
|
|
|
|
#ifdef CONFIG_ENV_IS_IN_FLASH
|
|
/* ENV protection ON by default */
|
|
flash_protect(FLAG_PROTECT_SET,
|
|
CONFIG_ENV_ADDR,
|
|
CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
|
|
&flash_info[1]);
|
|
#endif
|
|
/*
|
|
* Swap bank numbers so that addresses are in ascending order
|
|
*/
|
|
tmp_info = flash_info[0];
|
|
flash_info[0] = flash_info[1];
|
|
flash_info[1] = tmp_info;
|
|
} else {
|
|
memctl->memc_br1 = 0; /* invalidate bank */
|
|
|
|
flash_info[1].flash_id = FLASH_UNKNOWN;
|
|
flash_info[1].sector_count = -1;
|
|
}
|
|
|
|
|
|
DEBUGF("## Final Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
|
|
|
|
return (size_b0 + size_b1);
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
static void flash_get_offsets (ulong base, flash_info_t *info)
|
|
{
|
|
int i;
|
|
short n;
|
|
|
|
if (info->flash_id == FLASH_UNKNOWN) {
|
|
return;
|
|
}
|
|
|
|
if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_AMD) {
|
|
return;
|
|
}
|
|
|
|
switch (info->flash_id & FLASH_TYPEMASK) {
|
|
case FLASH_AMDL322T:
|
|
case FLASH_AMDL323T:
|
|
case FLASH_AMDL324T:
|
|
/* set sector offsets for top boot block type */
|
|
|
|
base += info->size;
|
|
i = info->sector_count;
|
|
for (n=0; n<8; ++n) { /* 8 x 8k boot sectors */
|
|
base -= 8 << 10;
|
|
--i;
|
|
info->start[i] = base;
|
|
}
|
|
while (i > 0) { /* 64k regular sectors */
|
|
base -= 64 << 10;
|
|
--i;
|
|
info->start[i] = base;
|
|
}
|
|
return;
|
|
case FLASH_AMDL322B:
|
|
case FLASH_AMDL323B:
|
|
case FLASH_AMDL324B:
|
|
/* set sector offsets for bottom boot block type */
|
|
for (i=0; i<8; ++i) { /* 8 x 8k boot sectors */
|
|
info->start[i] = base;
|
|
base += 8 << 10;
|
|
}
|
|
while (base < info->size) { /* 64k regular sectors */
|
|
info->start[i] = base;
|
|
base += 64 << 10;
|
|
++i;
|
|
}
|
|
return;
|
|
case FLASH_AMDL640:
|
|
/* set sector offsets for dual boot block type */
|
|
for (i=0; i<8; ++i) { /* 8 x 8k boot sectors */
|
|
info->start[i] = base;
|
|
base += 8 << 10;
|
|
}
|
|
n = info->sector_count - 8;
|
|
while (i < n) { /* 64k regular sectors */
|
|
info->start[i] = base;
|
|
base += 64 << 10;
|
|
++i;
|
|
}
|
|
while (i < info->sector_count) { /* 8 x 8k boot sectors */
|
|
info->start[i] = base;
|
|
base += 8 << 10;
|
|
++i;
|
|
}
|
|
return;
|
|
default:
|
|
return;
|
|
}
|
|
/* NOTREACHED */
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
void flash_print_info (flash_info_t *info)
|
|
{
|
|
int i;
|
|
|
|
if (info->flash_id == FLASH_UNKNOWN) {
|
|
printf ("missing or unknown FLASH type\n");
|
|
return;
|
|
}
|
|
|
|
switch (info->flash_id & FLASH_VENDMASK) {
|
|
case FLASH_MAN_AMD: printf ("AMD "); break;
|
|
case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
|
|
default: printf ("Unknown Vendor "); break;
|
|
}
|
|
|
|
switch (info->flash_id & FLASH_TYPEMASK) {
|
|
case FLASH_AMDL322B: printf ("AM29DL322B (32 Mbit, bottom boot sect)\n");
|
|
break;
|
|
case FLASH_AMDL322T: printf ("AM29DL322T (32 Mbit, top boot sector)\n");
|
|
break;
|
|
case FLASH_AMDL323B: printf ("AM29DL323B (32 Mbit, bottom boot sect)\n");
|
|
break;
|
|
case FLASH_AMDL323T: printf ("AM29DL323T (32 Mbit, top boot sector)\n");
|
|
break;
|
|
case FLASH_AMDL324B: printf ("AM29DL324B (32 Mbit, bottom boot sect)\n");
|
|
break;
|
|
case FLASH_AMDL324T: printf ("AM29DL324T (32 Mbit, top boot sector)\n");
|
|
break;
|
|
case FLASH_AMDL640: printf ("AM29DL640D (64 Mbit, dual boot sector)\n");
|
|
break;
|
|
default: printf ("Unknown Chip Type 0x%lX\n",
|
|
info->flash_id);
|
|
break;
|
|
}
|
|
|
|
printf (" Size: %ld MB in %d Sectors\n",
|
|
info->size >> 20, info->sector_count);
|
|
|
|
printf (" Sector Start Addresses:");
|
|
for (i=0; i<info->sector_count; ++i) {
|
|
if ((i % 5) == 0)
|
|
printf ("\n ");
|
|
printf (" %08lX%s",
|
|
info->start[i],
|
|
info->protect[i] ? " (RO)" : " "
|
|
);
|
|
}
|
|
printf ("\n");
|
|
return;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
/*
|
|
* The following code cannot be run from FLASH!
|
|
*/
|
|
|
|
static ulong flash_get_size (vu_long *addr, flash_info_t *info)
|
|
{
|
|
short i;
|
|
ushort value;
|
|
vu_short *saddr = (vu_short *)addr;
|
|
|
|
/* Write auto select command: read Manufacturer ID */
|
|
saddr[0x0555] = 0x00AA;
|
|
saddr[0x02AA] = 0x0055;
|
|
saddr[0x0555] = 0x0090;
|
|
|
|
value = saddr[0];
|
|
|
|
DEBUGF("Manuf. ID @ 0x%08lx: 0x%04x\n", (ulong)addr, value);
|
|
|
|
switch (value) {
|
|
case (AMD_MANUFACT & 0xFFFF):
|
|
info->flash_id = FLASH_MAN_AMD;
|
|
break;
|
|
case (FUJ_MANUFACT & 0xFFFF):
|
|
info->flash_id = FLASH_MAN_FUJ;
|
|
break;
|
|
default:
|
|
DEBUGF("Unknown Manufacturer ID\n");
|
|
info->flash_id = FLASH_UNKNOWN;
|
|
info->sector_count = 0;
|
|
info->size = 0;
|
|
return (0); /* no or unknown flash */
|
|
}
|
|
|
|
value = saddr[1]; /* device ID */
|
|
|
|
DEBUGF("Device ID @ 0x%08lx: 0x%04x\n", (ulong)(&addr[1]), value);
|
|
|
|
switch (value) {
|
|
|
|
case (AMD_ID_DL322T & 0xFFFF):
|
|
info->flash_id += FLASH_AMDL322T;
|
|
info->sector_count = 71;
|
|
info->size = 0x00400000;
|
|
break; /* => 8 MB */
|
|
|
|
case (AMD_ID_DL322B & 0xFFFF):
|
|
info->flash_id += FLASH_AMDL322B;
|
|
info->sector_count = 71;
|
|
info->size = 0x00400000;
|
|
break; /* => 8 MB */
|
|
|
|
case (AMD_ID_DL323T & 0xFFFF):
|
|
info->flash_id += FLASH_AMDL323T;
|
|
info->sector_count = 71;
|
|
info->size = 0x00400000;
|
|
break; /* => 8 MB */
|
|
|
|
case (AMD_ID_DL323B & 0xFFFF):
|
|
info->flash_id += FLASH_AMDL323B;
|
|
info->sector_count = 71;
|
|
info->size = 0x00400000;
|
|
break; /* => 8 MB */
|
|
|
|
case (AMD_ID_DL324T & 0xFFFF):
|
|
info->flash_id += FLASH_AMDL324T;
|
|
info->sector_count = 71;
|
|
info->size = 0x00400000;
|
|
break; /* => 8 MB */
|
|
|
|
case (AMD_ID_DL324B & 0xFFFF):
|
|
info->flash_id += FLASH_AMDL324B;
|
|
info->sector_count = 71;
|
|
info->size = 0x00400000;
|
|
break; /* => 8 MB */
|
|
case (AMD_ID_DL640 & 0xFFFF):
|
|
info->flash_id += FLASH_AMDL640;
|
|
info->sector_count = 142;
|
|
info->size = 0x00800000;
|
|
break;
|
|
default:
|
|
DEBUGF("Unknown Device ID\n");
|
|
info->flash_id = FLASH_UNKNOWN;
|
|
return (0); /* => no or unknown flash */
|
|
|
|
}
|
|
|
|
flash_get_offsets ((ulong)addr, info);
|
|
|
|
/* check for protected sectors */
|
|
for (i = 0; i < info->sector_count; i++) {
|
|
#if 0
|
|
/* read sector protection at sector address, (A7 .. A0) = 0x02 */
|
|
/* D0 = 1 if protected */
|
|
saddr = (vu_short *)(info->start[i]);
|
|
info->protect[i] = saddr[2] & 1;
|
|
#else
|
|
info->protect[i] =0;
|
|
#endif
|
|
}
|
|
|
|
if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
|
|
printf ("** ERROR: sector count %d > max (%d) **\n",
|
|
info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
|
|
info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
|
|
}
|
|
|
|
saddr = (vu_short *)info->start[0];
|
|
*saddr = 0x00F0; /* restore read mode */
|
|
|
|
return (info->size);
|
|
}
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
int flash_erase (flash_info_t *info, int s_first, int s_last)
|
|
{
|
|
vu_short *addr = (vu_short*)(info->start[0]);
|
|
int flag, prot, sect, l_sect;
|
|
ulong start, now, last;
|
|
|
|
if ((s_first < 0) || (s_first > s_last)) {
|
|
if (info->flash_id == FLASH_UNKNOWN) {
|
|
printf ("- missing\n");
|
|
} else {
|
|
printf ("- no sectors to erase\n");
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
if ((info->flash_id == FLASH_UNKNOWN) ||
|
|
(info->flash_id > FLASH_AMD_COMP)) {
|
|
printf ("Can't erase unknown flash type %08lx - aborted\n",
|
|
info->flash_id);
|
|
return 1;
|
|
}
|
|
|
|
prot = 0;
|
|
for (sect=s_first; sect<=s_last; ++sect) {
|
|
if (info->protect[sect]) {
|
|
prot++;
|
|
}
|
|
}
|
|
|
|
if (prot) {
|
|
printf ("- Warning: %d protected sectors will not be erased!\n",
|
|
prot);
|
|
} else {
|
|
printf ("\n");
|
|
}
|
|
|
|
l_sect = -1;
|
|
|
|
/* Disable interrupts which might cause a timeout here */
|
|
flag = disable_interrupts();
|
|
|
|
addr[0x0555] = 0x00AA;
|
|
addr[0x02AA] = 0x0055;
|
|
addr[0x0555] = 0x0080;
|
|
addr[0x0555] = 0x00AA;
|
|
addr[0x02AA] = 0x0055;
|
|
|
|
/* Start erase on unprotected sectors */
|
|
for (sect = s_first; sect<=s_last; sect++) {
|
|
if (info->protect[sect] == 0) { /* not protected */
|
|
addr = (vu_short*)(info->start[sect]);
|
|
addr[0] = 0x0030;
|
|
l_sect = sect;
|
|
}
|
|
}
|
|
|
|
/* re-enable interrupts if necessary */
|
|
if (flag)
|
|
enable_interrupts();
|
|
|
|
/* wait at least 80us - let's wait 1 ms */
|
|
udelay (1000);
|
|
|
|
/*
|
|
* We wait for the last triggered sector
|
|
*/
|
|
if (l_sect < 0)
|
|
goto DONE;
|
|
|
|
start = get_timer (0);
|
|
last = start;
|
|
addr = (vu_short*)(info->start[l_sect]);
|
|
while ((addr[0] & 0x0080) != 0x0080) {
|
|
if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
|
|
printf ("Timeout\n");
|
|
return 1;
|
|
}
|
|
/* show that we're waiting */
|
|
if ((now - last) > 1000) { /* every second */
|
|
putc ('.');
|
|
last = now;
|
|
}
|
|
}
|
|
|
|
DONE:
|
|
/* reset to read mode */
|
|
addr = (vu_short *)info->start[0];
|
|
addr[0] = 0x00F0; /* reset bank */
|
|
|
|
printf (" done\n");
|
|
return 0;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Copy memory to flash, returns:
|
|
* 0 - OK
|
|
* 1 - write timeout
|
|
* 2 - Flash not erased
|
|
*/
|
|
|
|
#define FLASH_WIDTH 2 /* flash bus width in bytes */
|
|
|
|
int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
|
|
{
|
|
ulong cp, wp, data;
|
|
int i, l, rc;
|
|
|
|
wp = (addr & ~(FLASH_WIDTH-1)); /* get lower FLASH_WIDTH aligned address */
|
|
|
|
/*
|
|
* handle unaligned start bytes
|
|
*/
|
|
if ((l = addr - wp) != 0) {
|
|
data = 0;
|
|
for (i=0, cp=wp; i<l; ++i, ++cp) {
|
|
data = (data << 8) | (*(uchar *)cp);
|
|
}
|
|
for (; i<FLASH_WIDTH && cnt>0; ++i) {
|
|
data = (data << 8) | *src++;
|
|
--cnt;
|
|
++cp;
|
|
}
|
|
for (; cnt==0 && i<FLASH_WIDTH; ++i, ++cp) {
|
|
data = (data << 8) | (*(uchar *)cp);
|
|
}
|
|
|
|
if ((rc = write_data(info, wp, data)) != 0) {
|
|
return (rc);
|
|
}
|
|
wp += FLASH_WIDTH;
|
|
}
|
|
|
|
/*
|
|
* handle FLASH_WIDTH aligned part
|
|
*/
|
|
while (cnt >= FLASH_WIDTH) {
|
|
data = 0;
|
|
for (i=0; i<FLASH_WIDTH; ++i) {
|
|
data = (data << 8) | *src++;
|
|
}
|
|
if ((rc = write_data(info, wp, data)) != 0) {
|
|
return (rc);
|
|
}
|
|
wp += FLASH_WIDTH;
|
|
cnt -= FLASH_WIDTH;
|
|
}
|
|
|
|
if (cnt == 0) {
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* handle unaligned tail bytes
|
|
*/
|
|
data = 0;
|
|
for (i=0, cp=wp; i<FLASH_WIDTH && cnt>0; ++i, ++cp) {
|
|
data = (data << 8) | *src++;
|
|
--cnt;
|
|
}
|
|
for (; i<FLASH_WIDTH; ++i, ++cp) {
|
|
data = (data << 8) | (*(uchar *)cp);
|
|
}
|
|
|
|
return (write_data(info, wp, data));
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Write a word to Flash, returns:
|
|
* 0 - OK
|
|
* 1 - write timeout
|
|
* 2 - Flash not erased
|
|
*/
|
|
static int write_data (flash_info_t *info, ulong dest, ulong data)
|
|
{
|
|
vu_short *addr = (vu_short*)(info->start[0]);
|
|
vu_short *sdest = (vu_short *)dest;
|
|
ushort sdata = (ushort)data;
|
|
ushort sval;
|
|
ulong start, passed;
|
|
int flag, rc;
|
|
|
|
/* Check if Flash is (sufficiently) erased */
|
|
if ((*sdest & sdata) != sdata) {
|
|
return (2);
|
|
}
|
|
/* Disable interrupts which might cause a timeout here */
|
|
flag = disable_interrupts();
|
|
|
|
addr[0x0555] = 0x00AA;
|
|
addr[0x02AA] = 0x0055;
|
|
addr[0x0555] = 0x00A0;
|
|
|
|
#ifdef WORKAROUND_FOR_BROKEN_HARDWARE
|
|
/* work around the timeout bugs */
|
|
udelay(20);
|
|
#endif
|
|
|
|
*sdest = sdata;
|
|
|
|
/* re-enable interrupts if necessary */
|
|
if (flag)
|
|
enable_interrupts();
|
|
|
|
rc = 0;
|
|
/* data polling for D7 */
|
|
start = get_timer (0);
|
|
|
|
for (passed=0; passed < CONFIG_SYS_FLASH_WRITE_TOUT; passed=get_timer(start)) {
|
|
|
|
sval = *sdest;
|
|
|
|
if ((sval & 0x0080) == (sdata & 0x0080))
|
|
break;
|
|
|
|
if ((sval & 0x0020) == 0) /* DQ5: Timeout? */
|
|
continue;
|
|
|
|
sval = *sdest;
|
|
|
|
if ((sval & 0x0080) != (sdata & 0x0080))
|
|
rc = 1;
|
|
|
|
break;
|
|
}
|
|
|
|
if (rc) {
|
|
DEBUGF ("Program cycle failed @ addr 0x%08lX: val %04X data %04X\n",
|
|
dest, sval, sdata);
|
|
}
|
|
|
|
if (passed >= CONFIG_SYS_FLASH_WRITE_TOUT) {
|
|
DEBUGF ("Timeout @ addr 0x%08lX: val %04X data %04X\n",
|
|
dest, sval, sdata);
|
|
rc = 1;
|
|
}
|
|
|
|
/* reset to read mode */
|
|
addr = (vu_short *)info->start[0];
|
|
addr[0] = 0x00F0; /* reset bank */
|
|
|
|
return (rc);
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
|