upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
120 lines
2.6 KiB
120 lines
2.6 KiB
/*
|
|
* (C) Copyright 2007-2008
|
|
* Stelian Pop <stelian@popies.net>
|
|
* Lead Tech Design <www.leadtechdesign.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/at91_pit.h>
|
|
#include <asm/arch/at91_pmc.h>
|
|
#include <asm/arch/clk.h>
|
|
#include <div64.h>
|
|
|
|
#if !defined(CONFIG_AT91FAMILY)
|
|
# error You need to define CONFIG_AT91FAMILY in your board config!
|
|
#endif
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/*
|
|
* We're using the AT91CAP9/SAM9 PITC in 32 bit mode, by
|
|
* setting the 20 bit counter period to its maximum (0xfffff).
|
|
* (See the relevant data sheets to understand that this really works)
|
|
*
|
|
* We do also mimic the typical powerpc way of incrementing
|
|
* two 32 bit registers called tbl and tbu.
|
|
*
|
|
* Those registers increment at 1/16 the main clock rate.
|
|
*/
|
|
|
|
#define TIMER_LOAD_VAL 0xfffff
|
|
|
|
static inline unsigned long long tick_to_time(unsigned long long tick)
|
|
{
|
|
tick *= CONFIG_SYS_HZ;
|
|
do_div(tick, gd->arch.timer_rate_hz);
|
|
|
|
return tick;
|
|
}
|
|
|
|
static inline unsigned long long usec_to_tick(unsigned long long usec)
|
|
{
|
|
usec *= gd->arch.timer_rate_hz;
|
|
do_div(usec, 1000000);
|
|
|
|
return usec;
|
|
}
|
|
|
|
/*
|
|
* Use the PITC in full 32 bit incrementing mode
|
|
*/
|
|
int timer_init(void)
|
|
{
|
|
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
|
at91_pit_t *pit = (at91_pit_t *) ATMEL_BASE_PIT;
|
|
|
|
/* Enable PITC Clock */
|
|
writel(1 << ATMEL_ID_SYS, &pmc->pcer);
|
|
|
|
/* Enable PITC */
|
|
writel(TIMER_LOAD_VAL | AT91_PIT_MR_EN , &pit->mr);
|
|
|
|
gd->arch.timer_rate_hz = gd->arch.mck_rate_hz / 16;
|
|
gd->arch.tbu = gd->arch.tbl = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Get the current 64 bit timer tick count
|
|
*/
|
|
unsigned long long get_ticks(void)
|
|
{
|
|
at91_pit_t *pit = (at91_pit_t *) ATMEL_BASE_PIT;
|
|
|
|
ulong now = readl(&pit->piir);
|
|
|
|
/* increment tbu if tbl has rolled over */
|
|
if (now < gd->arch.tbl)
|
|
gd->arch.tbu++;
|
|
gd->arch.tbl = now;
|
|
return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl;
|
|
}
|
|
|
|
void __udelay(unsigned long usec)
|
|
{
|
|
unsigned long long start;
|
|
ulong tmo;
|
|
|
|
start = get_ticks(); /* get current timestamp */
|
|
tmo = usec_to_tick(usec); /* convert usecs to ticks */
|
|
while ((get_ticks() - start) < tmo)
|
|
; /* loop till time has passed */
|
|
}
|
|
|
|
/*
|
|
* get_timer(base) can be used to check for timeouts or
|
|
* to measure elasped time relative to an event:
|
|
*
|
|
* ulong start_time = get_timer(0) sets start_time to the current
|
|
* time value.
|
|
* get_timer(start_time) returns the time elapsed since then.
|
|
*
|
|
* The time is used in CONFIG_SYS_HZ units!
|
|
*/
|
|
ulong get_timer(ulong base)
|
|
{
|
|
return tick_to_time(get_ticks()) - base;
|
|
}
|
|
|
|
/*
|
|
* Return the number of timer ticks per second.
|
|
*/
|
|
ulong get_tbclk(void)
|
|
{
|
|
return gd->arch.timer_rate_hz;
|
|
}
|
|
|