upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
93 lines
1.9 KiB
93 lines
1.9 KiB
/*
|
|
* TI SATA platform driver
|
|
*
|
|
* (C) Copyright 2013
|
|
* Texas Instruments, <www.ti.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <ahci.h>
|
|
#include <scsi.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/sata.h>
|
|
#include <sata.h>
|
|
#include <asm/io.h>
|
|
#include "pipe3-phy.h"
|
|
|
|
static struct pipe3_dpll_map dpll_map_sata[] = {
|
|
{12000000, {1000, 7, 4, 6, 0} }, /* 12 MHz */
|
|
{16800000, {714, 7, 4, 6, 0} }, /* 16.8 MHz */
|
|
{19200000, {625, 7, 4, 6, 0} }, /* 19.2 MHz */
|
|
{20000000, {600, 7, 4, 6, 0} }, /* 20 MHz */
|
|
{26000000, {461, 7, 4, 6, 0} }, /* 26 MHz */
|
|
{38400000, {312, 7, 4, 6, 0} }, /* 38.4 MHz */
|
|
{ }, /* Terminator */
|
|
};
|
|
|
|
struct omap_pipe3 sata_phy = {
|
|
.pll_ctrl_base = (void __iomem *)TI_SATA_PLLCTRL_BASE,
|
|
/* .power_reg is updated at runtime */
|
|
.dpll_map = dpll_map_sata,
|
|
};
|
|
|
|
int init_sata(int dev)
|
|
{
|
|
int ret;
|
|
u32 val;
|
|
|
|
u32 const clk_domains_sata[] = {
|
|
0
|
|
};
|
|
|
|
u32 const clk_modules_hw_auto_sata[] = {
|
|
(*prcm)->cm_l3init_ocp2scp3_clkctrl,
|
|
0
|
|
};
|
|
|
|
u32 const clk_modules_explicit_en_sata[] = {
|
|
(*prcm)->cm_l3init_sata_clkctrl,
|
|
0
|
|
};
|
|
|
|
do_enable_clocks(clk_domains_sata,
|
|
clk_modules_hw_auto_sata,
|
|
clk_modules_explicit_en_sata,
|
|
0);
|
|
|
|
/* Enable optional functional clock for SATA */
|
|
setbits_le32((*prcm)->cm_l3init_sata_clkctrl,
|
|
SATA_CLKCTRL_OPTFCLKEN_MASK);
|
|
|
|
sata_phy.power_reg = (void __iomem *)(*ctrl)->control_phy_power_sata;
|
|
|
|
/* Power up the PHY */
|
|
phy_pipe3_power_on(&sata_phy);
|
|
|
|
/* Enable SATA module, No Idle, No Standby */
|
|
val = TI_SATA_IDLE_NO | TI_SATA_STANDBY_NO;
|
|
writel(val, TI_SATA_WRAPPER_BASE + TI_SATA_SYSCONFIG);
|
|
|
|
ret = ahci_init(DWC_AHSATA_BASE);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int reset_sata(int dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/* On OMAP platforms SATA provides the SCSI subsystem */
|
|
void scsi_init(void)
|
|
{
|
|
init_sata(0);
|
|
scsi_scan(1);
|
|
}
|
|
|
|
void scsi_bus_reset(void)
|
|
{
|
|
ahci_reset(DWC_AHSATA_BASE);
|
|
ahci_init(DWC_AHSATA_BASE);
|
|
}
|
|
|