upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/x86/cpu/intel_common/mrc.c

271 lines
6.5 KiB

/*
* Copyright (c) 2016 Google, Inc
*
* SPDX-License-Identifier: GPL-2.0
*/
#include <common.h>
#include <dm.h>
#include <syscon.h>
#include <asm/cpu.h>
#include <asm/gpio.h>
#include <asm/intel_regs.h>
#include <asm/mrc_common.h>
#include <asm/pch_common.h>
#include <asm/post.h>
#include <asm/arch/me.h>
#include <asm/report_platform.h>
static const char *const ecc_decoder[] = {
"inactive",
"active on IO",
"disabled on IO",
"active"
};
ulong mrc_common_board_get_usable_ram_top(ulong total_size)
{
struct memory_info *info = &gd->arch.meminfo;
uintptr_t dest_addr = 0;
struct memory_area *largest = NULL;
int i;
/* Find largest area of memory below 4GB */
for (i = 0; i < info->num_areas; i++) {
struct memory_area *area = &info->area[i];
if (area->start >= 1ULL << 32)
continue;
if (!largest || area->size > largest->size)
largest = area;
}
/* If no suitable area was found, return an error. */
assert(largest);
if (!largest || largest->size < (2 << 20))
panic("No available memory found for relocation");
dest_addr = largest->start + largest->size;
return (ulong)dest_addr;
}
void mrc_common_dram_init_banksize(void)
{
struct memory_info *info = &gd->arch.meminfo;
int num_banks;
int i;
for (i = 0, num_banks = 0; i < info->num_areas; i++) {
struct memory_area *area = &info->area[i];
if (area->start >= 1ULL << 32)
continue;
gd->bd->bi_dram[num_banks].start = area->start;
gd->bd->bi_dram[num_banks].size = area->size;
num_banks++;
}
}
int mrc_add_memory_area(struct memory_info *info, uint64_t start,
uint64_t end)
{
struct memory_area *ptr;
if (info->num_areas == CONFIG_NR_DRAM_BANKS)
return -ENOSPC;
ptr = &info->area[info->num_areas];
ptr->start = start;
ptr->size = end - start;
info->total_memory += ptr->size;
if (ptr->start < (1ULL << 32))
info->total_32bit_memory += ptr->size;
debug("%d: memory %llx size %llx, total now %llx / %llx\n",
info->num_areas, ptr->start, ptr->size,
info->total_32bit_memory, info->total_memory);
info->num_areas++;
return 0;
}
/*
* Dump in the log memory controller configuration as read from the memory
* controller registers.
*/
void report_memory_config(void)
{
u32 addr_decoder_common, addr_decode_ch[2];
int i;
addr_decoder_common = readl(MCHBAR_REG(0x5000));
addr_decode_ch[0] = readl(MCHBAR_REG(0x5004));
addr_decode_ch[1] = readl(MCHBAR_REG(0x5008));
debug("memcfg DDR3 clock %d MHz\n",
(readl(MCHBAR_REG(0x5e04)) * 13333 * 2 + 50) / 100);
debug("memcfg channel assignment: A: %d, B % d, C % d\n",
addr_decoder_common & 3,
(addr_decoder_common >> 2) & 3,
(addr_decoder_common >> 4) & 3);
for (i = 0; i < ARRAY_SIZE(addr_decode_ch); i++) {
u32 ch_conf = addr_decode_ch[i];
debug("memcfg channel[%d] config (%8.8x):\n", i, ch_conf);
debug(" ECC %s\n", ecc_decoder[(ch_conf >> 24) & 3]);
debug(" enhanced interleave mode %s\n",
((ch_conf >> 22) & 1) ? "on" : "off");
debug(" rank interleave %s\n",
((ch_conf >> 21) & 1) ? "on" : "off");
debug(" DIMMA %d MB width x%d %s rank%s\n",
((ch_conf >> 0) & 0xff) * 256,
((ch_conf >> 19) & 1) ? 16 : 8,
((ch_conf >> 17) & 1) ? "dual" : "single",
((ch_conf >> 16) & 1) ? "" : ", selected");
debug(" DIMMB %d MB width x%d %s rank%s\n",
((ch_conf >> 8) & 0xff) * 256,
((ch_conf >> 20) & 1) ? 16 : 8,
((ch_conf >> 18) & 1) ? "dual" : "single",
((ch_conf >> 16) & 1) ? ", selected" : "");
}
}
int mrc_locate_spd(struct udevice *dev, int size, const void **spd_datap)
{
const void *blob = gd->fdt_blob;
int spd_index;
struct gpio_desc desc[4];
int spd_node;
int node;
int ret;
ret = gpio_request_list_by_name(dev, "board-id-gpios", desc,
ARRAY_SIZE(desc), GPIOD_IS_IN);
if (ret < 0) {
debug("%s: gpio ret=%d\n", __func__, ret);
return ret;
}
spd_index = dm_gpio_get_values_as_int(desc, ret);
debug("spd index %d\n", spd_index);
node = fdt_first_subnode(blob, dev->of_offset);
if (node < 0)
return -EINVAL;
for (spd_node = fdt_first_subnode(blob, node);
spd_node > 0;
spd_node = fdt_next_subnode(blob, spd_node)) {
int len;
if (fdtdec_get_int(blob, spd_node, "reg", -1) != spd_index)
continue;
*spd_datap = fdt_getprop(blob, spd_node, "data", &len);
if (len < size) {
printf("Missing SPD data\n");
return -EINVAL;
}
debug("Using SDRAM SPD data for '%s'\n",
fdt_get_name(blob, spd_node, NULL));
return 0;
}
printf("No SPD data found for index %d\n", spd_index);
return -ENOENT;
}
asmlinkage void sdram_console_tx_byte(unsigned char byte)
{
#ifdef DEBUG
putc(byte);
#endif
}
/**
* Find the PEI executable in the ROM and execute it.
*
* @me_dev: Management Engine device
* @pei_data: configuration data for UEFI PEI reference code
*/
static int sdram_initialise(struct udevice *dev, struct udevice *me_dev,
void *pei_data, bool use_asm_linkage)
{
unsigned version;
const char *data;
report_platform_info(dev);
debug("Starting UEFI PEI System Agent\n");
debug("PEI data at %p:\n", pei_data);
data = (char *)CONFIG_X86_MRC_ADDR;
if (data) {
int rv;
ulong start;
debug("Calling MRC at %p\n", data);
post_code(POST_PRE_MRC);
start = get_timer(0);
if (use_asm_linkage) {
asmlinkage int (*func)(void *);
func = (asmlinkage int (*)(void *))data;
rv = func(pei_data);
} else {
int (*func)(void *);
func = (int (*)(void *))data;
rv = func(pei_data);
}
post_code(POST_MRC);
if (rv) {
switch (rv) {
case -1:
printf("PEI version mismatch.\n");
break;
case -2:
printf("Invalid memory frequency.\n");
break;
default:
printf("MRC returned %x.\n", rv);
}
printf("Nonzero MRC return value.\n");
return -EFAULT;
}
debug("MRC execution time %lu ms\n", get_timer(start));
} else {
printf("UEFI PEI System Agent not found.\n");
return -ENOSYS;
}
version = readl(MCHBAR_REG(MCHBAR_PEI_VERSION));
debug("System Agent Version %d.%d.%d Build %d\n",
version >> 24 , (version >> 16) & 0xff,
(version >> 8) & 0xff, version & 0xff);
#if CONFIG_USBDEBUG
/* mrc.bin reconfigures USB, so reinit it to have debug */
early_usbdebug_init();
#endif
return 0;
}
int mrc_common_init(struct udevice *dev, void *pei_data, bool use_asm_linkage)
{
struct udevice *me_dev;
int ret;
ret = syscon_get_by_driver_data(X86_SYSCON_ME, &me_dev);
if (ret)
return ret;
ret = sdram_initialise(dev, me_dev, pei_data, use_asm_linkage);
if (ret)
return ret;
quick_ram_check();
post_code(POST_DRAM);
report_memory_config();
return 0;
}