upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
133 lines
2.8 KiB
133 lines
2.8 KiB
/*
|
|
* Copyright 2004 Freescale Semiconductor.
|
|
* Jeff Brown
|
|
* Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
|
|
*
|
|
* (C) Copyright 2000-2002
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <mpc86xx.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* used in some defintiions of CONFIG_SYS_CLK_FREQ */
|
|
extern unsigned long get_board_sys_clk(unsigned long dummy);
|
|
|
|
void get_sys_info(sys_info_t *sys_info)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
|
|
volatile ccsr_gur_t *gur = &immap->im_gur;
|
|
uint plat_ratio, e600_ratio;
|
|
|
|
plat_ratio = (gur->porpllsr) & 0x0000003e;
|
|
plat_ratio >>= 1;
|
|
|
|
switch (plat_ratio) {
|
|
case 0x0:
|
|
sys_info->freq_systembus = 16 * CONFIG_SYS_CLK_FREQ;
|
|
break;
|
|
case 0x02:
|
|
case 0x03:
|
|
case 0x04:
|
|
case 0x05:
|
|
case 0x06:
|
|
case 0x08:
|
|
case 0x09:
|
|
case 0x0a:
|
|
case 0x0c:
|
|
case 0x10:
|
|
sys_info->freq_systembus = plat_ratio * CONFIG_SYS_CLK_FREQ;
|
|
break;
|
|
default:
|
|
sys_info->freq_systembus = 0;
|
|
break;
|
|
}
|
|
|
|
e600_ratio = (gur->porpllsr) & 0x003f0000;
|
|
e600_ratio >>= 16;
|
|
|
|
switch (e600_ratio) {
|
|
case 0x10:
|
|
sys_info->freq_processor = 2 * sys_info->freq_systembus;
|
|
break;
|
|
case 0x19:
|
|
sys_info->freq_processor = 5 * sys_info->freq_systembus / 2;
|
|
break;
|
|
case 0x20:
|
|
sys_info->freq_processor = 3 * sys_info->freq_systembus;
|
|
break;
|
|
case 0x39:
|
|
sys_info->freq_processor = 7 * sys_info->freq_systembus / 2;
|
|
break;
|
|
case 0x28:
|
|
sys_info->freq_processor = 4 * sys_info->freq_systembus;
|
|
break;
|
|
case 0x1d:
|
|
sys_info->freq_processor = 9 * sys_info->freq_systembus / 2;
|
|
break;
|
|
default:
|
|
sys_info->freq_processor = e600_ratio +
|
|
sys_info->freq_systembus;
|
|
break;
|
|
}
|
|
|
|
sys_info->freq_localbus = sys_info->freq_systembus;
|
|
}
|
|
|
|
|
|
/*
|
|
* Measure CPU clock speed (core clock GCLK1, GCLK2)
|
|
* (Approx. GCLK frequency in Hz)
|
|
*/
|
|
|
|
int get_clocks(void)
|
|
{
|
|
sys_info_t sys_info;
|
|
|
|
get_sys_info(&sys_info);
|
|
gd->cpu_clk = sys_info.freq_processor;
|
|
gd->bus_clk = sys_info.freq_systembus;
|
|
gd->arch.lbc_clk = sys_info.freq_localbus;
|
|
|
|
/*
|
|
* The base clock for I2C depends on the actual SOC. Unfortunately,
|
|
* there is no pattern that can be used to determine the frequency, so
|
|
* the only choice is to look up the actual SOC number and use the value
|
|
* for that SOC. This information is taken from application note
|
|
* AN2919.
|
|
*/
|
|
#ifdef CONFIG_ARCH_MPC8610
|
|
gd->arch.i2c1_clk = sys_info.freq_systembus;
|
|
#else
|
|
gd->arch.i2c1_clk = sys_info.freq_systembus / 2;
|
|
#endif
|
|
gd->arch.i2c2_clk = gd->arch.i2c1_clk;
|
|
|
|
if (gd->cpu_clk != 0)
|
|
return 0;
|
|
else
|
|
return 1;
|
|
}
|
|
|
|
|
|
/*
|
|
* get_bus_freq
|
|
* Return system bus freq in Hz
|
|
*/
|
|
|
|
ulong get_bus_freq(ulong dummy)
|
|
{
|
|
ulong val;
|
|
sys_info_t sys_info;
|
|
|
|
get_sys_info(&sys_info);
|
|
val = sys_info.freq_systembus;
|
|
|
|
return val;
|
|
}
|
|
|