upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/ttcontrol/vision2/vision2.c

711 lines
20 KiB

/*
* (C) Copyright 2010
* Stefano Babic, DENX Software Engineering, sbabic@denx.de.
*
* (C) Copyright 2009 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/mx5x_pins.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/iomux.h>
#include <mxc_gpio.h>
#include <asm/arch/sys_proto.h>
#include <asm/errno.h>
#include <i2c.h>
#include <mmc.h>
#include <fsl_esdhc.h>
#include <fsl_pmic.h>
#include <mc13892.h>
DECLARE_GLOBAL_DATA_PTR;
static u32 system_rev;
#ifdef CONFIG_HW_WATCHDOG
#include <watchdog.h>
void hw_watchdog_reset(void)
{
int val;
/* toggle watchdog trigger pin */
val = mxc_gpio_get(66);
val = val ? 0 : 1;
mxc_gpio_set(66, val);
}
#endif
static void init_drive_strength(void)
{
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEDDR, PAD_CTL_DDR_INPUT_CMOS);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEADDR, PAD_CTL_PKE_ENABLE);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRAPKS, PAD_CTL_PUE_KEEPER);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRAPUS, PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_A1, PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_A0, PAD_CTL_DRV_HIGH);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_A1, PAD_CTL_DRV_HIGH);
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_RAS,
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CAS,
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEDDR, PAD_CTL_PKE_ENABLE);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRPKS, PAD_CTL_PUE_KEEPER);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR0, PAD_CTL_HYS_NONE);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR1, PAD_CTL_HYS_NONE);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR2, PAD_CTL_HYS_NONE);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR3, PAD_CTL_HYS_NONE);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B0, PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B1, PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B2, PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B4, PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRPUS, PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_INMODE1, PAD_CTL_DDR_INPUT_CMOS);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B0, PAD_CTL_DRV_MEDIUM);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B1, PAD_CTL_DRV_MEDIUM);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B2, PAD_CTL_DRV_MEDIUM);
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B4, PAD_CTL_DRV_MEDIUM);
/* Setting pad options */
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDWE,
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCKE0,
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCKE1,
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCLK,
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS0,
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS1,
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS2,
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS3,
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CS0,
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CS1,
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM0,
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM1,
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM2,
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM3,
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
}
u32 get_board_rev(void)
{
system_rev = get_cpu_rev();
return system_rev;
}
int dram_init(void)
{
#ifdef CONFIG_SYS_ARM_WITHOUT_RELOC
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1,
PHYS_SDRAM_1_SIZE);
#if (CONFIG_NR_DRAM_BANKS > 1)
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2,
PHYS_SDRAM_2_SIZE);
#endif
#else
gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1,
PHYS_SDRAM_1_SIZE);
#endif
return 0;
}
static void setup_weim(void)
{
struct weim *pweim = (struct weim *)WEIM_BASE_ADDR;
pweim->csgcr1 = 0x004100b9;
pweim->csgcr2 = 0x00000001;
pweim->csrcr1 = 0x0a018000;
pweim->csrcr2 = 0;
pweim->cswcr1 = 0x0704a240;
}
static void setup_uart(void)
{
unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST;
/* console RX on Pin EIM_D25 */
mxc_request_iomux(MX51_PIN_EIM_D25, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_EIM_D25, pad);
/* console TX on Pin EIM_D26 */
mxc_request_iomux(MX51_PIN_EIM_D26, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_EIM_D26, pad);
}
#ifdef CONFIG_MXC_SPI
void spi_io_init(void)
{
/* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */
mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI,
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
/* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */
mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO,
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
/* 000: Select mux mode: ALT0 mux port: SS0 of instance: ecspi1. */
mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_CSPI1_SS0,
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
/*
* SS1 will be used as GPIO because of uninterrupted
* long SPI transmissions (GPIO4_25)
*/
mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_CSPI1_SS1,
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
/* 000: Select mux mode: ALT0 mux port: SS2 of instance: ecspi1. */
mxc_request_iomux(MX51_PIN_DI1_PIN11, IOMUX_CONFIG_ALT7);
mxc_iomux_set_pad(MX51_PIN_DI1_PIN11,
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
/* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */
mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK,
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
}
static void reset_peripherals(int reset)
{
if (reset) {
/* reset_n is on NANDF_D15 */
mxc_gpio_set(89, 0);
mxc_gpio_direction(89, MXC_GPIO_DIRECTION_OUT);
#ifdef CONFIG_VISION2_HW_1_0
/*
* set FEC Configuration lines
* set levels of FEC config lines
*/
mxc_gpio_set(75, 0);
mxc_gpio_set(74, 1);
mxc_gpio_set(95, 1);
mxc_gpio_direction(75, MXC_GPIO_DIRECTION_OUT);
mxc_gpio_direction(74, MXC_GPIO_DIRECTION_OUT);
mxc_gpio_direction(95, MXC_GPIO_DIRECTION_OUT);
/* set direction of FEC config lines */
mxc_gpio_set(59, 0);
mxc_gpio_set(60, 0);
mxc_gpio_set(61, 0);
mxc_gpio_set(55, 1);
mxc_gpio_direction(59, MXC_GPIO_DIRECTION_OUT);
mxc_gpio_direction(60, MXC_GPIO_DIRECTION_OUT);
mxc_gpio_direction(61, MXC_GPIO_DIRECTION_OUT);
mxc_gpio_direction(55, MXC_GPIO_DIRECTION_OUT);
/* FEC_RXD1 - sel GPIO (2-23) for configuration -> 1 */
mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT1);
/* FEC_RXD2 - sel GPIO (2-27) for configuration -> 0 */
mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT1);
/* FEC_RXD3 - sel GPIO (2-28) for configuration -> 0 */
mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT1);
/* FEC_RXER - sel GPIO (2-29) for configuration -> 0 */
mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT1);
/* FEC_COL - sel GPIO (3-10) for configuration -> 1 */
mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT3);
/* FEC_RCLK - sel GPIO (3-11) for configuration -> 0 */
mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT3);
/* FEC_RXD0 - sel GPIO (3-31) for configuration -> 1 */
mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT3);
#endif
/*
* activate reset_n pin
* Select mux mode: ALT3 mux port: NAND D15
*/
mxc_request_iomux(MX51_PIN_NANDF_D15, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_NANDF_D15,
PAD_CTL_DRV_VOT_HIGH | PAD_CTL_DRV_MAX);
} else {
/* set FEC Control lines */
mxc_gpio_direction(89, MXC_GPIO_DIRECTION_IN);
udelay(500);
#ifdef CONFIG_VISION2_HW_1_0
/* FEC RDATA[3] */
mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180);
/* FEC RDATA[2] */
mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180);
/* FEC RDATA[1] */
mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180);
/* FEC RDATA[0] */
mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2);
mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180);
/* FEC RX_CLK */
mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180);
/* FEC RX_ER */
mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180);
/* FEC COL */
mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180);
#endif
}
}
static void power_init_mx51(void)
{
unsigned int val;
/* Write needed to Power Gate 2 register */
val = pmic_reg_read(REG_POWER_MISC);
/* enable VCAM with 2.775V to enable read from PMIC */
val = VCAMCONFIG | VCAMEN;
pmic_reg_write(REG_MODE_1, val);
/*
* Set switchers in Auto in NORMAL mode & STANDBY mode
* Setup the switcher mode for SW1 & SW2
*/
val = pmic_reg_read(REG_SW_4);
val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) |
(SWMODE_MASK << SWMODE2_SHIFT)));
val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) |
(SWMODE_AUTO_AUTO << SWMODE2_SHIFT);
pmic_reg_write(REG_SW_4, val);
/* Setup the switcher mode for SW3 & SW4 */
val = pmic_reg_read(REG_SW_5);
val &= ~((SWMODE_MASK << SWMODE4_SHIFT) |
(SWMODE_MASK << SWMODE3_SHIFT));
val |= (SWMODE_AUTO_AUTO << SWMODE4_SHIFT) |
(SWMODE_AUTO_AUTO << SWMODE3_SHIFT);
pmic_reg_write(REG_SW_5, val);
/* Set VGEN3 to 1.8V, VCAM to 3.0V */
val = pmic_reg_read(REG_SETTING_0);
val &= ~(VCAM_MASK | VGEN3_MASK);
val |= VCAM_3_0;
pmic_reg_write(REG_SETTING_0, val);
/* Set VVIDEO to 2.775V, VAUDIO to 3V0, VSD to 1.8V */
val = pmic_reg_read(REG_SETTING_1);
val &= ~(VVIDEO_MASK | VSD_MASK | VAUDIO_MASK);
val |= VVIDEO_2_775 | VAUDIO_3_0 | VSD_1_8;
pmic_reg_write(REG_SETTING_1, val);
/* Configure VGEN3 and VCAM regulators to use external PNP */
val = VGEN3CONFIG | VCAMCONFIG;
pmic_reg_write(REG_MODE_1, val);
udelay(200);
/* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */
val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG |
VVIDEOEN | VAUDIOEN | VSDEN;
pmic_reg_write(REG_MODE_1, val);
val = pmic_reg_read(REG_POWER_CTL2);
val |= WDIRESET;
pmic_reg_write(REG_POWER_CTL2, val);
udelay(2500);
}
#endif
static void setup_gpios(void)
{
unsigned int i;
/* CAM_SUP_DISn, GPIO1_7 */
mxc_request_iomux(MX51_PIN_GPIO1_7, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_GPIO1_7, 0x82);
/* DAB Display EN, GPIO3_1 */
mxc_request_iomux(MX51_PIN_DI1_PIN12, IOMUX_CONFIG_ALT4);
mxc_iomux_set_pad(MX51_PIN_DI1_PIN12, 0x82);
/* WDOG_TRIGGER, GPIO3_2 */
mxc_request_iomux(MX51_PIN_DI1_PIN13, IOMUX_CONFIG_ALT4);
mxc_iomux_set_pad(MX51_PIN_DI1_PIN13, 0x82);
/* Now we need to trigger the watchdog */
WATCHDOG_RESET();
/* Display2 TxEN, GPIO3_3 */
mxc_request_iomux(MX51_PIN_DI1_D0_CS, IOMUX_CONFIG_ALT4);
mxc_iomux_set_pad(MX51_PIN_DI1_D0_CS, 0x82);
/* DAB Light EN, GPIO3_4 */
mxc_request_iomux(MX51_PIN_DI1_D1_CS, IOMUX_CONFIG_ALT4);
mxc_iomux_set_pad(MX51_PIN_DI1_D1_CS, 0x82);
/* AUDIO_MUTE, GPIO3_5 */
mxc_request_iomux(MX51_PIN_DISPB2_SER_DIN, IOMUX_CONFIG_ALT4);
mxc_iomux_set_pad(MX51_PIN_DISPB2_SER_DIN, 0x82);
/* SPARE_OUT, GPIO3_6 */
mxc_request_iomux(MX51_PIN_DISPB2_SER_DIO, IOMUX_CONFIG_ALT4);
mxc_iomux_set_pad(MX51_PIN_DISPB2_SER_DIO, 0x82);
/* BEEPER_EN, GPIO3_26 */
mxc_request_iomux(MX51_PIN_NANDF_D14, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_NANDF_D14, 0x82);
/* POWER_OFF, GPIO3_27 */
mxc_request_iomux(MX51_PIN_NANDF_D13, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_NANDF_D13, 0x82);
/* FRAM_WE, GPIO3_30 */
mxc_request_iomux(MX51_PIN_NANDF_D10, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_NANDF_D10, 0x82);
/* EXPANSION_EN, GPIO4_26 */
mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, 0x82);
/*
* Set GPIO1_4 to high and output; it is used to reset
* the system on reboot
*/
mxc_gpio_set(4, 1);
mxc_gpio_direction(4, MXC_GPIO_DIRECTION_OUT);
mxc_gpio_set(7, 0);
mxc_gpio_direction(7, MXC_GPIO_DIRECTION_OUT);
for (i = 65; i < 71; i++) {
mxc_gpio_set(i, 0);
mxc_gpio_direction(i, MXC_GPIO_DIRECTION_OUT);
}
mxc_gpio_set(94, 0);
mxc_gpio_direction(94, MXC_GPIO_DIRECTION_OUT);
/* Set POWER_OFF high */
mxc_gpio_set(91, 1);
mxc_gpio_direction(91, MXC_GPIO_DIRECTION_OUT);
mxc_gpio_set(90, 0);
mxc_gpio_direction(90, MXC_GPIO_DIRECTION_OUT);
mxc_gpio_set(122, 0);
mxc_gpio_direction(122, MXC_GPIO_DIRECTION_OUT);
mxc_gpio_set(121, 1);
mxc_gpio_direction(121, MXC_GPIO_DIRECTION_OUT);
WATCHDOG_RESET();
}
static void setup_fec(void)
{
/*FEC_MDIO*/
mxc_request_iomux(MX51_PIN_EIM_EB2, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_EIM_EB2, 0x1FD);
/*FEC_MDC*/
mxc_request_iomux(MX51_PIN_NANDF_CS3, IOMUX_CONFIG_ALT2);
mxc_iomux_set_pad(MX51_PIN_NANDF_CS3, 0x2004);
/* FEC RDATA[3] */
mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180);
/* FEC RDATA[2] */
mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180);
/* FEC RDATA[1] */
mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180);
/* FEC RDATA[0] */
mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2);
mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180);
/* FEC TDATA[3] */
mxc_request_iomux(MX51_PIN_NANDF_CS6, IOMUX_CONFIG_ALT2);
mxc_iomux_set_pad(MX51_PIN_NANDF_CS6, 0x2004);
/* FEC TDATA[2] */
mxc_request_iomux(MX51_PIN_NANDF_CS5, IOMUX_CONFIG_ALT2);
mxc_iomux_set_pad(MX51_PIN_NANDF_CS5, 0x2004);
/* FEC TDATA[1] */
mxc_request_iomux(MX51_PIN_NANDF_CS4, IOMUX_CONFIG_ALT2);
mxc_iomux_set_pad(MX51_PIN_NANDF_CS4, 0x2004);
/* FEC TDATA[0] */
mxc_request_iomux(MX51_PIN_NANDF_D8, IOMUX_CONFIG_ALT2);
mxc_iomux_set_pad(MX51_PIN_NANDF_D8, 0x2004);
/* FEC TX_EN */
mxc_request_iomux(MX51_PIN_NANDF_CS7, IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX51_PIN_NANDF_CS7, 0x2004);
/* FEC TX_ER */
mxc_request_iomux(MX51_PIN_NANDF_CS2, IOMUX_CONFIG_ALT2);
mxc_iomux_set_pad(MX51_PIN_NANDF_CS2, 0x2004);
/* FEC TX_CLK */
mxc_request_iomux(MX51_PIN_NANDF_RDY_INT, IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX51_PIN_NANDF_RDY_INT, 0x2180);
/* FEC TX_COL */
mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180);
/* FEC RX_CLK */
mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180);
/* FEC RX_CRS */
mxc_request_iomux(MX51_PIN_EIM_CS5, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_EIM_CS5, 0x180);
/* FEC RX_ER */
mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180);
/* FEC RX_DV */
mxc_request_iomux(MX51_PIN_NANDF_D11, IOMUX_CONFIG_ALT2);
mxc_iomux_set_pad(MX51_PIN_NANDF_D11, 0x2180);
}
struct fsl_esdhc_cfg esdhc_cfg[1] = {
{MMC_SDHC1_BASE_ADDR, 1},
};
int get_mmc_getcd(u8 *cd, struct mmc *mmc)
{
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
*cd = mxc_gpio_get(0);
else
*cd = 0;
return 0;
}
#ifdef CONFIG_FSL_ESDHC
int board_mmc_init(bd_t *bis)
{
mxc_request_iomux(MX51_PIN_SD1_CMD,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
mxc_request_iomux(MX51_PIN_SD1_CLK,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
mxc_request_iomux(MX51_PIN_SD1_DATA0,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
mxc_request_iomux(MX51_PIN_SD1_DATA1,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
mxc_request_iomux(MX51_PIN_SD1_DATA2,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
mxc_request_iomux(MX51_PIN_SD1_DATA3,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
mxc_iomux_set_pad(MX51_PIN_SD1_CMD,
PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
PAD_CTL_PUE_PULL |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_SD1_CLK,
PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
PAD_CTL_HYS_NONE | PAD_CTL_47K_PU |
PAD_CTL_PUE_PULL |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_SD1_DATA0,
PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
PAD_CTL_PUE_PULL |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_SD1_DATA1,
PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
PAD_CTL_PUE_PULL |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_SD1_DATA2,
PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
PAD_CTL_PUE_PULL |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX51_PIN_SD1_DATA3,
PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PD |
PAD_CTL_PUE_PULL |
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
mxc_request_iomux(MX51_PIN_GPIO1_0,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
mxc_iomux_set_pad(MX51_PIN_GPIO1_0,
PAD_CTL_HYS_ENABLE);
mxc_request_iomux(MX51_PIN_GPIO1_1,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
mxc_iomux_set_pad(MX51_PIN_GPIO1_1,
PAD_CTL_HYS_ENABLE);
return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
}
#endif
int board_early_init_f(void)
{
init_drive_strength();
/* Setup debug led */
mxc_gpio_set(6, 0);
mxc_gpio_direction(6, MXC_GPIO_DIRECTION_OUT);
mxc_request_iomux(MX51_PIN_GPIO1_6, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_GPIO1_6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
/* wait a little while to give the pll time to settle */
sdelay(100000);
setup_weim();
setup_uart();
setup_fec();
setup_gpios();
spi_io_init();
return 0;
}
int board_init(void)
{
#ifdef CONFIG_SYS_ARM_WITHOUT_RELOC
board_early_init_f();
#endif
gd->bd->bi_arch_number = MACH_TYPE_TTC_VISION2; /* board id for linux */
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
return 0;
}
int board_late_init(void)
{
power_init_mx51();
reset_peripherals(1);
udelay(2000);
reset_peripherals(0);
udelay(2000);
/* Early revisions require a second reset */
#ifdef CONFIG_VISION2_HW_1_0
reset_peripherals(1);
udelay(2000);
reset_peripherals(0);
udelay(2000);
#endif
return 0;
}
int checkboard(void)
{
u32 system_rev = get_cpu_rev();
u32 cause;
struct src *src_regs = (struct src *)SRC_BASE_ADDR;
puts("Board: TTControl Vision II CPU V");
switch (system_rev & 0xff) {
case CHIP_REV_3_0:
puts("3.0 [");
break;
case CHIP_REV_2_5:
puts("2.5 [");
break;
case CHIP_REV_2_0:
puts("2.0 [");
break;
case CHIP_REV_1_1:
puts("1.1 [");
break;
case CHIP_REV_1_0:
default:
puts("1.0 [");
break;
}
cause = src_regs->srsr;
switch (cause) {
case 0x0001:
puts("POR");
break;
case 0x0009:
puts("RST");
break;
case 0x0010:
case 0x0011:
puts("WDOG");
break;
default:
printf("unknown 0x%x", cause);
}
puts("]\n");
return 0;
}