upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
114 lines
2.6 KiB
114 lines
2.6 KiB
/*
|
|
* Jz4740 UART support
|
|
* Copyright (c) 2011
|
|
* Qi Hardware, Xiangfu Liu <xiangfu@sharism.cc>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/jz4740.h>
|
|
|
|
/*
|
|
* serial_init - initialize a channel
|
|
*
|
|
* This routine initializes the number of data bits, parity
|
|
* and set the selected baud rate. Interrupts are disabled.
|
|
* Set the modem control signals if the option is selected.
|
|
*
|
|
* RETURNS: N/A
|
|
*/
|
|
struct jz4740_uart *uart = (struct jz4740_uart *)CONFIG_SYS_UART_BASE;
|
|
|
|
int serial_init(void)
|
|
{
|
|
/* Disable port interrupts while changing hardware */
|
|
writeb(0, &uart->dlhr_ier);
|
|
|
|
/* Disable UART unit function */
|
|
writeb(~UART_FCR_UUE, &uart->iir_fcr);
|
|
|
|
/* Set both receiver and transmitter in UART mode (not SIR) */
|
|
writeb(~(SIRCR_RSIRE | SIRCR_TSIRE), &uart->isr);
|
|
|
|
/*
|
|
* Set databits, stopbits and parity.
|
|
* (8-bit data, 1 stopbit, no parity)
|
|
*/
|
|
writeb(UART_LCR_WLEN_8 | UART_LCR_STOP_1, &uart->lcr);
|
|
|
|
/* Set baud rate */
|
|
serial_setbrg();
|
|
|
|
/* Enable UART unit, enable and clear FIFO */
|
|
writeb(UART_FCR_UUE | UART_FCR_FE | UART_FCR_TFLS | UART_FCR_RFLS,
|
|
&uart->iir_fcr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void serial_setbrg(void)
|
|
{
|
|
u32 baud_div, tmp;
|
|
|
|
baud_div = CONFIG_SYS_EXTAL / 16 / CONFIG_BAUDRATE;
|
|
|
|
tmp = readb(&uart->lcr);
|
|
tmp |= UART_LCR_DLAB;
|
|
writeb(tmp, &uart->lcr);
|
|
|
|
writeb((baud_div >> 8) & 0xff, &uart->dlhr_ier);
|
|
writeb(baud_div & 0xff, &uart->rbr_thr_dllr);
|
|
|
|
tmp &= ~UART_LCR_DLAB;
|
|
writeb(tmp, &uart->lcr);
|
|
}
|
|
|
|
int serial_tstc(void)
|
|
{
|
|
if (readb(&uart->lsr) & UART_LSR_DR)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void serial_putc(const char c)
|
|
{
|
|
if (c == '\n')
|
|
serial_putc('\r');
|
|
|
|
/* Wait for fifo to shift out some bytes */
|
|
while (!((readb(&uart->lsr) & (UART_LSR_TDRQ | UART_LSR_TEMT)) == 0x60))
|
|
;
|
|
|
|
writeb((u8)c, &uart->rbr_thr_dllr);
|
|
}
|
|
|
|
int serial_getc(void)
|
|
{
|
|
while (!serial_tstc())
|
|
;
|
|
|
|
return readb(&uart->rbr_thr_dllr);
|
|
}
|
|
|
|
void serial_puts(const char *s)
|
|
{
|
|
while (*s)
|
|
serial_putc(*s++);
|
|
}
|
|
|