upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/mmc/bcmstb_sdhci.c

67 lines
2.0 KiB

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2018 Cisco Systems, Inc.
*
* Author: Thomas Fitzsimmons <fitzsim@fitzsim.org>
*/
#include <common.h>
#include <mach/sdhci.h>
#include <malloc.h>
#include <sdhci.h>
/*
* The BCMSTB SDHCI has a quirk in that its actual maximum frequency
* capability is 100 MHz. The divisor that is eventually written to
* SDHCI_CLOCK_CONTROL is calculated based on what the MMC device
* reports, and relative to this maximum frequency.
*
* This define used to be set to 52000000 (52 MHz), the desired
* maximum frequency, but that would result in the communication
* actually running at 100 MHz (seemingly without issue), which is
* out-of-spec.
*
* Now, by setting this to 0 (auto-detect), 100 MHz will be read from
* the capabilities register, and the resulting divisor will be
* doubled, meaning that the clock control register will be set to the
* in-spec 52 MHz value.
*/
#define BCMSTB_SDHCI_MAXIMUM_CLOCK_FREQUENCY 0
/*
* When the minimum clock frequency is set to 0 (auto-detect), U-Boot
* sets it to 100 MHz divided by SDHCI_MAX_DIV_SPEC_300, or 48,875 Hz,
* which results in the controller timing out when trying to
* communicate with the MMC device. Hard-code this value to 400000
* (400 kHz) to prevent this.
*/
#define BCMSTB_SDHCI_MINIMUM_CLOCK_FREQUENCY 400000
static char *BCMSTB_SDHCI_NAME = "bcmstb-sdhci";
/*
* This driver has only been tested with eMMC devices; SD devices may
* not work.
*/
int bcmstb_sdhci_init(phys_addr_t regbase)
{
struct sdhci_host *host = NULL;
host = (struct sdhci_host *)malloc(sizeof(struct sdhci_host));
if (!host) {
printf("%s: Failed to allocate memory\n", __func__);
return 1;
}
memset(host, 0, sizeof(*host));
host->name = BCMSTB_SDHCI_NAME;
host->ioaddr = (void *)regbase;
host->quirks = 0;
host->cfg.part_type = PART_TYPE_DOS;
host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
return add_sdhci(host,
BCMSTB_SDHCI_MAXIMUM_CLOCK_FREQUENCY,
BCMSTB_SDHCI_MINIMUM_CLOCK_FREQUENCY);
}