upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/pci/Kconfig

115 lines
3.5 KiB

menuconfig PCI
bool "PCI support"
default y if PPC
help
Enable support for PCI (Peripheral Interconnect Bus), a type of bus
used on some devices to allow the CPU to communicate with its
peripherals.
if PCI
config DM_PCI
bool "Enable driver model for PCI"
depends on DM
help
Use driver model for PCI. Driver model is the new method for
orgnising devices in U-Boot. For PCI, driver model keeps track of
available PCI devices, allows scanning of PCI buses and provides
device configuration support.
config DM_PCI_COMPAT
bool "Enable compatible functions for PCI"
depends on DM_PCI
help
Enable compatibility functions for PCI so that old code can be used
with CONFIG_DM_PCI enabled. This should be used as an interim
measure when porting a board to use driver model for PCI. Once the
board is fully supported, this option should be disabled.
config PCI_AARDVARK
bool "Enable Aardvark PCIe driver"
default n
depends on DM_PCI
depends on ARMADA_3700
help
Say Y here if you want to enable PCIe controller support on
Armada37x0 SoCs. The PCIe controller on Armada37x0 is based on
Aardvark hardware.
config PCI_PNP
bool "Enable Plug & Play support for PCI"
depends on PCI || DM_PCI
default y
help
Enable PCI memory and I/O space resource allocation and assignment.
config PCIE_ECAM_GENERIC
bool "Generic ECAM-based PCI host controller support"
default n
depends on DM_PCI
help
Say Y here if you want to enable support for generic ECAM-based
PCIe host controllers, such as the one emulated by QEMU.
config PCIE_DW_MVEBU
bool "Enable Armada-8K PCIe driver (DesignWare core)"
depends on DM_PCI
depends on ARMADA_8K
help
Say Y here if you want to enable PCIe controller support on
Armada-8K SoCs. The PCIe controller on Armada-8K is based on
DesignWare hardware.
config PCI_RCAR_GEN2
bool "Renesas RCar Gen2 PCIe driver"
depends on DM_PCI
depends on RCAR_32
help
Say Y here if you want to enable PCIe controller support on
Renesas RCar Gen2 SoCs. The PCIe controller on RCar Gen2 is
also used to access EHCI USB controller on the SoC.
config PCI_SANDBOX
bool "Sandbox PCI support"
depends on SANDBOX && DM_PCI
help
Support PCI on sandbox, as an emulated bus. This permits testing of
PCI feature such as bus scanning, device configuration and device
access. The available (emulated) devices are defined statically in
the device tree but the normal PCI scan technique is used to find
then.
config PCI_TEGRA
bool "Tegra PCI support"
depends on TEGRA
depends on (TEGRA186 && POWER_DOMAIN) || (!TEGRA186)
help
Enable support for the PCIe controller found on some generations of
Tegra. Tegra20 has 2 root ports with a total of 4 lanes, Tegra30 has
3 root ports with a total of 6 lanes and Tegra124 has 2 root ports
with a total of 5 lanes. Some boards require this for Ethernet
support to work (e.g. beaver, jetson-tk1).
config PCI_XILINX
bool "Xilinx AXI Bridge for PCI Express"
depends on DM_PCI
help
Enable support for the Xilinx AXI bridge for PCI express, an IP block
which can be used on some generations of Xilinx FPGAs.
config PCIE_LAYERSCAPE
bool "Layerscape PCIe support"
depends on DM_PCI
help
Support Layerscape PCIe. The Layerscape SoC may have one or several
PCIe controllers. The PCIe may works in RC or EP mode according to
RCW[HOST_AGT_PEX] setting.
config PCIE_INTEL_FPGA
bool "Intel FPGA PCIe support"
depends on DM_PCI
help
Say Y here if you want to enable PCIe controller support on Intel
FPGA, example Stratix 10.
endif