u-boot/board/raspberrypi/rpi/Makefile

#
# (C) Copyright 2012 Stephen Warren
#
# SPDX-License-Identifier:	GPL-2.0
#

obj-y	:= rpi.o
obj-y	+= lowlevel_init.o
ARM: add Raspberry Pi model B board, using BCM2835 SoC The Raspberry Pi model B uses the BCM2835 SoC, has 256MB of RAM, contains an SMSC 9512 USB LAN/Hub chip, and various IO connectors. For more details, see http://www.raspberrypi.org/. Various portions (cache enable, MACH_TYPE setup, RAM size limit, stack relocation to top of RAM) extracted from work by: Oleksandr Tymoshenko <gonzo@bluezbox.com>. GPIO driver enablement by Vikram Narayanan <vikram186@gmail.com>. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Tom Rini <trini@ti.com> 12 years ago			`#`
bcm2835/rpi: add SPDX license tags for some files Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> 10 years ago			`# (C) Copyright 2012 Stephen Warren`
ARM: add Raspberry Pi model B board, using BCM2835 SoC The Raspberry Pi model B uses the BCM2835 SoC, has 256MB of RAM, contains an SMSC 9512 USB LAN/Hub chip, and various IO connectors. For more details, see http://www.raspberrypi.org/. Various portions (cache enable, MACH_TYPE setup, RAM size limit, stack relocation to top of RAM) extracted from work by: Oleksandr Tymoshenko <gonzo@bluezbox.com>. GPIO driver enablement by Vikram Narayanan <vikram186@gmail.com>. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Tom Rini <trini@ti.com> 12 years ago			`#`
bcm2835/rpi: add SPDX license tags for some files Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> 10 years ago			`# SPDX-License-Identifier: GPL-2.0`
ARM: add Raspberry Pi model B board, using BCM2835 SoC The Raspberry Pi model B uses the BCM2835 SoC, has 256MB of RAM, contains an SMSC 9512 USB LAN/Hub chip, and various IO connectors. For more details, see http://www.raspberrypi.org/. Various portions (cache enable, MACH_TYPE setup, RAM size limit, stack relocation to top of RAM) extracted from work by: Oleksandr Tymoshenko <gonzo@bluezbox.com>. GPIO driver enablement by Vikram Narayanan <vikram186@gmail.com>. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Tom Rini <trini@ti.com> 12 years ago			`#`

ARM: rpi: rename rpi_b to rpi The U-Boot port runs on a variety of RPi models, not just the B. So, rename the port to something slightly more generic. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> 10 years ago			`obj-y := rpi.o`
rpi: passthrough of the firmware provided FDT blob Raspberry firmware used to pass a FDT blob at a fixed address (0x100), but this is not true anymore. The address now depends on both the memory size and the blob size [1]. If one wants to passthrough this FDT blob to the kernel, the most reliable way is to save its address from the r2/x0 register in the U-Boot entry point and expose it in a environment variable for further processing. This patch just does this: - save the provided address in the global variable fw_dtb_pointer - expose it in ${fdt_addr} if it points to a a valid FDT blob There are many different ways to use it. One can, for example, use the following script which will extract from the tree the command line built by the firmware, then hand over the blob to a previously loaded kernel: fdt addr ${fdt_addr} fdt get value bootargs /chosen bootargs bootz ${kernel_addr_r} - ${fdt_addr} Alternatively, users relying on sysboot/pxe can simply omit any FDT statement in their extlinux.conf file, U-Boot will automagically pick ${fdt_addr} and pass it to the kernel. [1] https://www.raspberrypi.org/forums//viewtopic.php?f=107&t=134018 Signed-off-by: Cédric Schieli <cschieli@gmail.com> Acked-by: Stephen Warren <swarren@nvidia.com> 8 years ago			`obj-y += lowlevel_init.o`