upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/include/configs/gth2.h

224 lines
6.0 KiB

/*
* (C) Copyright 2005
* Thomas.Lange@corelatus.se
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* This file contains the configuration parameters for the gth2 board.
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#define CONFIG_MIPS32 1 /* MIPS32 CPU core */
#define CONFIG_GTH2 1
#define CONFIG_SOC_AU1X00 1 /* alchemy series cpu */
#define CONFIG_SOC_AU1000 1
#define CONFIG_MISC_INIT_R 1
#define CONFIG_ETHADDR DE:AD:BE:EF:01:02 /* Ethernet address */
#define CONFIG_BOOTDELAY 1 /* autoboot after 1 seconds */
#define CONFIG_ENV_OVERWRITE 1 /* Allow change of ethernet address */
#define CONFIG_BOOT_RETRY_TIME 5 /* Retry boot in 5 secs */
#define CONFIG_RESET_TO_RETRY 1 /* If timeout waiting for command, perform a reset */
#define CONFIG_BAUDRATE 115200
/* valid baudrates */
#define CFG_BAUDRATE_TABLE { 115200 }
/* Only interrupt boot if space is pressed */
/* If a long serial cable is connected but */
/* other end is dead, garbage will be read */
#define CONFIG_AUTOBOOT_KEYED 1
#define CONFIG_AUTOBOOT_PROMPT \
"Press space to abort autoboot in %d second\n", bootdelay
#define CONFIG_AUTOBOOT_DELAY_STR "d"
#define CONFIG_AUTOBOOT_STOP_STR " "
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
#define CONFIG_BOOTARGS "panic=1"
#define CONFIG_EXTRA_ENV_SETTINGS \
"addmisc=setenv bootargs $(bootargs) " \
"ethaddr=$(ethaddr) \0" \
"netboot=bootp;run addmisc;bootm\0" \
""
/* Boot from Compact flash partition 2 as default */
#define CONFIG_BOOTCOMMAND "ide reset;disk 0x81000000 0:2;run addmisc;bootm"
/*
* BOOTP options
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_IDE
#define CONFIG_CMD_DHCP
#undef CONFIG_CMD_ENV
#undef CONFIG_CMD_FAT
#undef CONFIG_CMD_FLASH
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_MII
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_LOADB
#undef CONFIG_CMD_ELF
#undef CONFIG_CMD_BDI
#undef CONFIG_CMD_BEDBUG
#undef CONFIG_CMD_NFS
#undef CONFIG_CMD_AUTOSCRIPT
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "GTH2 # " /* Monitor Command Prompt */
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args*/
#define CFG_MALLOC_LEN 128*1024
#define CFG_BOOTPARAMS_LEN 128*1024
#define CFG_MHZ 500
#define CFG_MIPS_TIMER_FREQ (CFG_MHZ * 1000000)
#define CFG_HZ 1000
#define CFG_SDRAM_BASE 0x80000000 /* Cached addr */
#define CFG_LOAD_ADDR 0x81000000 /* default load address */
#define CFG_MEMTEST_START 0x80100000
#define CFG_MEMTEST_END 0x83000000
#define CONFIG_HW_WATCHDOG 1
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT (128) /* max number of sectors on one chip */
#define PHYS_FLASH 0xbfc00000 /* Flash Bank #1 */
/* The following #defines are needed to get flash environment right */
#define CFG_MONITOR_BASE TEXT_BASE
#define CFG_MONITOR_LEN (192 << 10)
#define CFG_INIT_SP_OFFSET 0x400000
/* We boot from this flash, selected with dip switch */
#define CFG_FLASH_BASE PHYS_FLASH
/* timeout values are in ticks */
#define CFG_FLASH_ERASE_TOUT (2 * CFG_HZ) /* Timeout for Flash Erase */
#define CFG_FLASH_WRITE_TOUT (2 * CFG_HZ) /* Timeout for Flash Write */
#define CFG_ENV_IS_NOWHERE 1
/* Address and size of Primary Environment Sector */
#define CFG_ENV_ADDR 0xB0030000
#define CFG_ENV_SIZE 0x10000
#define CONFIG_FLASH_16BIT
#define CONFIG_NR_DRAM_BANKS 2
#define CONFIG_NET_MULTI
#define CONFIG_MEMSIZE_IN_BYTES
/*---ATA PCMCIA ------------------------------------*/
#define CFG_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */
#define CFG_PCMCIA_MEM_ADDR 0x20000000
#define CFG_PCMCIA_IO_BASE 0x28000000
#define CFG_PCMCIA_ATTR_BASE 0x30000000
#define CONFIG_PCMCIA_SLOT_A
#define CONFIG_ATAPI 1
#define CONFIG_MAC_PARTITION 1
/* We run CF in "true ide" mode or a harddrive via pcmcia */
#define CONFIG_IDE_PCMCIA 1
/* We only support one slot for now */
#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
#undef CONFIG_IDE_LED /* LED for ide not supported */
#undef CONFIG_IDE_RESET /* reset for ide not supported */
#define CFG_ATA_IDE0_OFFSET 0
#define CFG_ATA_BASE_ADDR CFG_PCMCIA_IO_BASE
/* Offset for data I/O */
#define CFG_ATA_DATA_OFFSET 0
/* Offset for normal register accesses */
#define CFG_ATA_REG_OFFSET 0
/* Offset for alternate registers */
#define CFG_ATA_ALT_OFFSET 0x0200
/*-----------------------------------------------------------------------
* Cache Configuration
*/
#define CFG_DCACHE_SIZE 16384
#define CFG_ICACHE_SIZE 16384
#define CFG_CACHELINE_SIZE 32
#define GPIO_CACONFIG (1<<0)
#define GPIO_DPACONFIG (1<<6)
#define GPIO_ERESET (1<<11)
#define GPIO_EEDQ (1<<17)
#define GPIO_WDI (1<<18)
#define GPIO_RJ1LY (1<<22)
#define GPIO_RJ1LG (1<<23)
#define GPIO_LEDCLK (1<<29)
#define GPIO_LEDD (1<<30)
#define GPIO_CPU_LED (1<<31)
#endif /* __CONFIG_H */