upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/board/bf537-stamp/post.c

245 lines
4.9 KiB

/*
* BF537-STAMP POST code
*
* Enter bugs at http://blackfin.uclinux.org/
*
* Copyright (c) 2005-2009 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <common.h>
#include <config.h>
#include <command.h>
#include <asm/blackfin.h>
#define POST_WORD_ADDR 0xFF903FFC
/* Using sw10-PF5 as the hotkey */
int post_hotkeys_pressed(void)
{
int delay = 3;
int i;
unsigned short value;
*pPORTF_FER &= ~PF5;
*pPORTFIO_DIR &= ~PF5;
*pPORTFIO_INEN |= PF5;
printf("########Press SW10 to enter Memory POST########: %2d ", delay);
while (delay--) {
for (i = 0; i < 100; i++) {
value = *pPORTFIO & PF5;
if (value != 0) {
break;
}
udelay(10000);
}
printf("\b\b\b%2d ", delay);
}
printf("\b\b\b 0");
printf("\n");
if (value == 0)
return 0;
else {
printf("Hotkey has been pressed, Enter POST . . . . . .\n");
return 1;
}
}
void post_word_store(ulong a)
{
volatile ulong *save_addr = (volatile ulong *)POST_WORD_ADDR;
*save_addr = a;
}
ulong post_word_load(void)
{
volatile ulong *save_addr = (volatile ulong *)POST_WORD_ADDR;
return *save_addr;
}
int uart_post_test(int flags)
{
return 0;
}
#define BLOCK_SIZE 0x10000
#define VERIFY_ADDR 0x2000000
extern int erase_block_flash(int);
extern int write_data(long lStart, long lCount, uchar * pnData);
int flash_post_test(int flags)
{
unsigned short *pbuf, *temp;
int offset, n, i;
int value = 0;
int result = 0;
printf("\n");
pbuf = (unsigned short *)VERIFY_ADDR;
temp = pbuf;
for (n = FLASH_START_POST_BLOCK; n < FLASH_END_POST_BLOCK; n++) {
offset = (n - 7) * BLOCK_SIZE;
printf("--------Erase block:%2d..", n);
erase_block_flash(n);
printf("OK\r");
printf("--------Program block:%2d...", n);
write_data(CONFIG_SYS_FLASH_BASE + offset, BLOCK_SIZE, pbuf);
printf("OK\r");
printf("--------Verify block:%2d...", n);
for (i = 0; i < BLOCK_SIZE; i += 2) {
if (*(unsigned short *)(CONFIG_SYS_FLASH_BASE + offset + i) !=
*temp++) {
value = 1;
result = 1;
}
}
if (value)
printf("failed\n");
else
printf("OK %3d%%\r",
(int)(
(n + 1 -
FLASH_START_POST_BLOCK) *
100 / (FLASH_END_POST_BLOCK -
FLASH_START_POST_BLOCK)));
temp = pbuf;
value = 0;
}
printf("\n");
if (result)
return -1;
else
return 0;
}
/****************************************************
* LED1 ---- PF6 LED2 ---- PF7 *
* LED3 ---- PF8 LED4 ---- PF9 *
* LED5 ---- PF10 LED6 ---- PF11 *
****************************************************/
int led_post_test(int flags)
{
*pPORTF_FER &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
*pPORTFIO_DIR |= PF6 | PF7 | PF8 | PF9 | PF10 | PF11;
*pPORTFIO_INEN &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
*pPORTFIO &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
udelay(1000000);
printf("LED1 on");
*pPORTFIO |= PF6;
udelay(1000000);
printf("\b\b\b\b\b\b\b");
printf("LED2 on");
*pPORTFIO |= PF7;
udelay(1000000);
printf("\b\b\b\b\b\b\b");
printf("LED3 on");
*pPORTFIO |= PF8;
udelay(1000000);
printf("\b\b\b\b\b\b\b");
printf("LED4 on");
*pPORTFIO |= PF9;
udelay(1000000);
printf("\b\b\b\b\b\b\b");
printf("LED5 on");
*pPORTFIO |= PF10;
udelay(1000000);
printf("\b\b\b\b\b\b\b");
printf("lED6 on");
*pPORTFIO |= PF11;
printf("\b\b\b\b\b\b\b ");
return 0;
}
/************************************************
* SW10 ---- PF5 SW11 ---- PF4 *
* SW12 ---- PF3 SW13 ---- PF2 *
************************************************/
int button_post_test(int flags)
{
int i, delay = 5;
unsigned short value = 0;
int result = 0;
*pPORTF_FER &= ~(PF5 | PF4 | PF3 | PF2);
*pPORTFIO_DIR &= ~(PF5 | PF4 | PF3 | PF2);
*pPORTFIO_INEN |= (PF5 | PF4 | PF3 | PF2);
printf("\n--------Press SW10: %2d ", delay);
while (delay--) {
for (i = 0; i < 100; i++) {
value = *pPORTFIO & PF5;
if (value != 0) {
break;
}
udelay(10000);
}
printf("\b\b\b%2d ", delay);
}
if (value != 0)
printf("\b\bOK");
else {
result = -1;
printf("\b\bfailed");
}
delay = 5;
printf("\n--------Press SW11: %2d ", delay);
while (delay--) {
for (i = 0; i < 100; i++) {
value = *pPORTFIO & PF4;
if (value != 0) {
break;
}
udelay(10000);
}
printf("\b\b\b%2d ", delay);
}
if (value != 0)
printf("\b\bOK");
else {
result = -1;
printf("\b\bfailed");
}
delay = 5;
printf("\n--------Press SW12: %2d ", delay);
while (delay--) {
for (i = 0; i < 100; i++) {
value = *pPORTFIO & PF3;
if (value != 0) {
break;
}
udelay(10000);
}
printf("\b\b\b%2d ", delay);
}
if (value != 0)
printf("\b\bOK");
else {
result = -1;
printf("\b\bfailed");
}
delay = 5;
printf("\n--------Press SW13: %2d ", delay);
while (delay--) {
for (i = 0; i < 100; i++) {
value = *pPORTFIO & PF2;
if (value != 0) {
break;
}
udelay(10000);
}
printf("\b\b\b%2d ", delay);
}
if (value != 0)
printf("\b\bOK");
else {
result = -1;
printf("\b\bfailed");
}
printf("\n");
return result;
}