upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
169 lines
4.4 KiB
169 lines
4.4 KiB
11 years ago
|
/*
|
||
|
|
* (C) Copyright 2007-2013
|
||
|
|
* Stelian Pop <stelian.pop@leadtechdesign.com>
|
||
|
|
* Lead Tech Design <www.leadtechdesign.com>
|
||
|
|
* Thomas Petazzoni, Free Electrons, <thomas.petazzoni@free-electrons.com>
|
||
|
|
* Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
|
||
|
|
*
|
||
|
|
* Settings for Calao USB-A9263 board
|
||
|
|
*
|
||
|
|
* U-Boot image has to be less than 200704 bytes, otherwise at91bootstrap
|
||
|
|
* installed on board will not be able to load it properly.
|
||
|
|
*
|
||
|
|
* SPDX-License-Identifier: GPL-2.0+
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifndef __CONFIG_H
|
||
|
|
#define __CONFIG_H
|
||
|
|
#include <asm/hardware.h>
|
||
|
|
|
||
|
|
/* ARM asynchronous clock */
|
||
|
|
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
|
||
|
|
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
|
||
|
|
|
||
|
|
#define CONFIG_MACH_TYPE MACH_TYPE_USB_A9263
|
||
|
|
|
||
|
|
#define CONFIG_ARCH_CPU_INIT
|
||
|
|
|
||
|
|
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
|
||
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
||
|
|
#define CONFIG_INITRD_TAG
|
||
|
|
|
||
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
||
|
|
|
||
|
|
#define CONFIG_DISPLAY_CPUINFO
|
||
|
|
|
||
|
|
#define CONFIG_OF_LIBFDT
|
||
|
|
#define CONFIG_SYS_GENERIC_BOARD
|
||
|
|
#define CONFIG_SYS_TEXT_BASE 0x23f00000
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Hardware drivers
|
||
|
|
*/
|
||
|
|
#define CONFIG_AT91_GPIO
|
||
|
|
|
||
|
|
/* serial console */
|
||
|
|
#define CONFIG_ATMEL_USART
|
||
|
|
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
|
||
|
|
#define CONFIG_USART_ID ATMEL_ID_SYS
|
||
|
|
#define CONFIG_BAUDRATE 115200
|
||
|
|
|
||
|
|
#define CONFIG_BOOTDELAY 3
|
||
|
|
|
||
|
|
/*
|
||
|
|
* BOOTP options
|
||
|
|
*/
|
||
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
||
|
|
#define CONFIG_BOOTP_BOOTPATH
|
||
|
|
#define CONFIG_BOOTP_GATEWAY
|
||
|
|
#define CONFIG_BOOTP_HOSTNAME
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Command line configuration.
|
||
|
|
*/
|
||
|
|
#include <config_cmd_default.h>
|
||
|
|
#undef CONFIG_CMD_BDI
|
||
|
|
#undef CONFIG_CMD_FPGA
|
||
|
|
#undef CONFIG_CMD_IMI
|
||
|
|
#undef CONFIG_CMD_IMLS
|
||
|
|
#undef CONFIG_CMD_ITEST
|
||
|
|
#undef CONFIG_CMD_LOADB
|
||
|
|
#undef CONFIG_CMD_LOADS
|
||
|
|
|
||
|
|
#define CONFIG_CMD_PING
|
||
|
|
#define CONFIG_CMD_DHCP
|
||
|
|
#define CONFIG_CMD_NAND
|
||
|
|
|
||
|
|
/* SDRAM */
|
||
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
||
|
|
#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
|
||
|
|
#define CONFIG_SYS_SDRAM_SIZE 0x04000000
|
||
|
|
|
||
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
||
|
|
(ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
|
||
|
|
|
||
|
|
/* DataFlash */
|
||
|
|
#define CONFIG_ATMEL_DATAFLASH_SPI
|
||
|
|
#define CONFIG_HAS_DATAFLASH
|
||
|
|
#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
|
||
|
|
#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
|
||
|
|
#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000
|
||
|
|
#define AT91_SPI_CLK 8000000
|
||
|
|
#define DATAFLASH_TCSS (0x1a << 16)
|
||
|
|
#define DATAFLASH_TCHS (0x1 << 24)
|
||
|
|
|
||
|
|
/* no NOR flash */
|
||
|
|
#define CONFIG_SYS_NO_FLASH
|
||
|
|
|
||
|
|
/* NAND flash */
|
||
|
|
#ifdef CONFIG_CMD_NAND
|
||
|
|
#define CONFIG_NAND_ATMEL
|
||
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||
|
|
#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
|
||
|
|
/* our ALE is AD21 */
|
||
|
|
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
|
||
|
|
/* our CLE is AD22 */
|
||
|
|
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
|
||
|
|
#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(15)
|
||
|
|
#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PA(22)
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#define MTDPARTS_DEFAULT \
|
||
|
|
"mtdparts=atmel_nand:16m(kernel)ro,120m(root1),-(root2)"
|
||
|
|
|
||
|
|
/* Ethernet */
|
||
|
|
#define CONFIG_MACB
|
||
|
|
#define CONFIG_RMII
|
||
|
|
#define CONFIG_NET_RETRY_COUNT 20
|
||
|
|
#define CONFIG_AT91_WANTS_COMMON_PHY
|
||
|
|
|
||
|
|
/* USB */
|
||
|
|
#ifdef CONFIG_CMD_USB
|
||
|
|
#define CONFIG_USB_ATMEL
|
||
|
|
#define CONFIG_USB_OHCI_NEW
|
||
|
|
#define CONFIG_DOS_PARTITION
|
||
|
|
#define CONFIG_SYS_USB_OHCI_CPU_INIT
|
||
|
|
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000
|
||
|
|
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
|
||
|
|
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
|
||
|
|
#define CONFIG_USB_STORAGE
|
||
|
|
#define CONFIG_CMD_FAT
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#define CONFIG_SYS_LOAD_ADDR 0x22000000
|
||
|
|
|
||
|
|
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
|
||
|
|
#define CONFIG_SYS_MEMTEST_END 0x23e00000
|
||
|
|
|
||
|
|
/* bootstrap + u-boot + env in dataflash on CS0 */
|
||
|
|
#define CONFIG_ENV_IS_IN_DATAFLASH
|
||
|
|
#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x4000)
|
||
|
|
#define CONFIG_ENV_OFFSET 0x2000
|
||
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \
|
||
|
|
CONFIG_ENV_OFFSET)
|
||
|
|
#define CONFIG_ENV_SIZE 0x2000
|
||
|
|
#define CONFIG_BOOTCOMMAND "nboot 21000000 0"
|
||
|
|
#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
|
||
|
|
"root=/dev/mtdblock1 " \
|
||
|
|
"mtdparts=" MTDPARTS_DEFAULT " " \
|
||
|
|
"rw rootfstype=jffs2"
|
||
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||
|
|
"mtdparts=" MTDPARTS_DEFAULT "\0" \
|
||
|
|
|
||
|
|
#define CONFIG_SYS_PROMPT "U-Boot> "
|
||
|
|
#define CONFIG_SYS_CBSIZE 256
|
||
|
|
#define CONFIG_SYS_MAXARGS 16
|
||
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
||
|
|
sizeof(CONFIG_SYS_PROMPT) + 16)
|
||
|
|
#define CONFIG_CMDLINE_EDITING
|
||
|
|
#define CONFIG_AUTO_COMPLETE
|
||
|
|
#define CONFIG_SYS_HUSH_PARSER
|
||
|
|
#define CONFIG_SYS_LONGHELP
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Size of malloc() pool
|
||
|
|
*/
|
||
|
|
#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
|
||
|
|
|
||
|
|
#endif
|