upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
81 lines
1.7 KiB
81 lines
1.7 KiB
17 years ago
|
/*
|
||
|
* Copyright 2008 Freescale Semiconductor, Inc.
|
||
|
*
|
||
|
* This program is free software; you can redistribute it and/or
|
||
|
* modify it under the terms of the GNU General Public License
|
||
|
* Version 2 as published by the Free Software Foundation.
|
||
|
*/
|
||
|
|
||
|
#include <common.h>
|
||
|
#include <i2c.h>
|
||
|
|
||
|
#include <asm/fsl_ddr_sdram.h>
|
||
|
|
||
|
static void
|
||
|
get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
|
||
|
{
|
||
|
i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t));
|
||
|
}
|
||
|
|
||
|
unsigned int fsl_ddr_get_mem_data_rate(void)
|
||
|
{
|
||
|
return get_ddr_freq(0);
|
||
|
}
|
||
|
|
||
|
void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
|
||
|
unsigned int ctrl_num)
|
||
|
{
|
||
|
unsigned int i;
|
||
|
|
||
|
if (ctrl_num) {
|
||
|
printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
|
||
|
get_spd(&(ctrl_dimms_spd[i]), SPD_EEPROM_ADDRESS);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
|
||
|
{
|
||
|
/*
|
||
|
* Factors to consider for clock adjust:
|
||
|
* - number of chips on bus
|
||
|
* - position of slot
|
||
|
* - DDR1 vs. DDR2?
|
||
|
* - ???
|
||
|
*
|
||
|
* This needs to be determined on a board-by-board basis.
|
||
|
* 0110 3/4 cycle late
|
||
|
* 0111 7/8 cycle late
|
||
|
*/
|
||
|
popts->clk_adjust = 7;
|
||
|
|
||
|
/*
|
||
|
* Factors to consider for CPO:
|
||
|
* - frequency
|
||
|
* - ddr1 vs. ddr2
|
||
|
*/
|
||
|
popts->cpo_override = 10;
|
||
|
|
||
|
/*
|
||
|
* Factors to consider for write data delay:
|
||
|
* - number of DIMMs
|
||
|
*
|
||
|
* 1 = 1/4 clock delay
|
||
|
* 2 = 1/2 clock delay
|
||
|
* 3 = 3/4 clock delay
|
||
|
* 4 = 1 clock delay
|
||
|
* 5 = 5/4 clock delay
|
||
|
* 6 = 3/2 clock delay
|
||
|
*/
|
||
|
popts->write_data_delay = 3;
|
||
|
|
||
|
/*
|
||
|
* Factors to consider for half-strength driver enable:
|
||
|
* - number of DIMMs installed
|
||
|
*/
|
||
|
popts->half_strength_driver_enable = 0;
|
||
|
}
|