|
|
|
|
/*
|
|
|
|
|
* (C) Copyright 2004
|
|
|
|
|
* Texas Instruments.
|
|
|
|
|
* Richard Woodruff <r-woodruff2@ti.com>
|
|
|
|
|
* Kshitij Gupta <kshitij@ti.com>
|
|
|
|
|
*
|
|
|
|
|
* Configuration settings for the LogicPD i.MX31 Litekit board.
|
|
|
|
|
*
|
|
|
|
|
* See file CREDITS for list of people who contributed to this
|
|
|
|
|
* project.
|
|
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
|
* modify it under the terms of the GNU General Public License as
|
|
|
|
|
* published by the Free Software Foundation; either version 2 of
|
|
|
|
|
* the License, or (at your option) any later version.
|
|
|
|
|
*
|
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
|
*
|
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
|
|
|
* MA 02111-1307 USA
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#ifndef __CONFIG_H
|
|
|
|
|
#define __CONFIG_H
|
|
|
|
|
|
|
|
|
|
#include <asm/arch/mx31-regs.h>
|
|
|
|
|
|
|
|
|
|
/* High Level Configuration Options */
|
|
|
|
|
#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */
|
|
|
|
|
#define CONFIG_MX31 1 /* in a mx31 */
|
|
|
|
|
#define CONFIG_MX31_HCLK_FREQ 26000000
|
|
|
|
|
#define CONFIG_MX31_CLK32 32000
|
|
|
|
|
|
|
|
|
|
#define CONFIG_DISPLAY_CPUINFO
|
|
|
|
|
#define CONFIG_DISPLAY_BOARDINFO
|
|
|
|
|
|
|
|
|
|
/* Temporarily disabled */
|
|
|
|
|
#if 0
|
|
|
|
|
#define CONFIG_OF_LIBFDT 1
|
|
|
|
|
#define CONFIG_FIT 1
|
|
|
|
|
#define CONFIG_FIT_VERBOSE 1
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
|
|
|
|
#define CONFIG_SETUP_MEMORY_TAGS 1
|
|
|
|
|
#define CONFIG_INITRD_TAG 1
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Size of malloc() pool
|
|
|
|
|
*/
|
|
|
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
|
|
|
|
|
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Hardware drivers
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define CONFIG_MXC_UART 1
|
|
|
|
|
#define CONFIG_SYS_MX31_UART1 1
|
|
|
|
|
|
|
|
|
|
#define CONFIG_HARD_SPI 1
|
|
|
|
|
#define CONFIG_MXC_SPI 1
|
SPI API improvements
This patch gets rid of the spi_chipsel table and adds a handful of new
functions that makes the SPI layer cleaner and more flexible.
Instead of the spi_chipsel table, each board that wants to use SPI
gets to implement three hooks:
* spi_cs_activate(): Activates the chipselect for a given slave
* spi_cs_deactivate(): Deactivates the chipselect for a given slave
* spi_cs_is_valid(): Determines if the given bus/chipselect
combination can be activated.
Not all drivers may need those extra functions however. If that's the
case, the board code may just leave them out (assuming they know what
the driver needs) or rely on the linker to strip them out (assuming
--gc-sections is being used.)
To set up communication parameters for a given slave, the driver needs
to call spi_setup_slave(). This returns a pointer to an opaque
spi_slave struct which must be passed as a parameter to subsequent SPI
calls. This struct can be freed by calling spi_free_slave(), but most
driver probably don't want to do this.
Before starting one or more SPI transfers, the driver must call
spi_claim_bus() to gain exclusive access to the SPI bus and initialize
the hardware. When all transfers are done, the driver must call
spi_release_bus() to make the bus available to others, and possibly
shut down the SPI controller hardware.
spi_xfer() behaves mostly the same as before, but it now takes a
spi_slave parameter instead of a spi_chipsel function pointer. It also
got a new parameter, flags, which is used to specify chip select
behaviour. This may be extended with other flags in the future.
This patch has been build-tested on all powerpc and arm boards
involved. I have not tested NIOS since I don't have a toolchain for it
installed, so I expect some breakage there even though I've tried
fixing up everything I could find by visual inspection.
I have run-time tested this on AVR32 ATNGW100 using the atmel_spi and
DataFlash drivers posted as a follow-up. I'd like some help testing
other boards that use the existing SPI API.
But most of all, I'd like some comments on the new API. Is this stuff
usable for everyone? If not, why?
Changed in v4:
- Build fixes for various boards, drivers and commands
- Provide common struct spi_slave definition that can be extended by
drivers
- Pass a struct spi_slave * to spi_cs_activate and spi_cs_deactivate
- Make default bus and mode build-time configurable
- Override default SPI bus ID and mode on mx32ads and imx31_litekit.
Changed in v3:
- Add opaque struct spi_slave for controller-specific data associated
with a slave.
- Add spi_claim_bus() and spi_release_bus()
- Add spi_free_slave()
- spi_setup() is now called spi_setup_slave() and returns a
struct spi_slave
- soft_spi now supports four SPI modes (CPOL|CPHA)
- Add bus parameter to spi_setup_slave()
- Convert the new i.MX32 SPI driver
- Convert the new MC13783 RTC driver
Changed in v2:
- Convert the mpc8xxx_spi driver and the mpc8349emds board to the
new API.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Tested-by: Guennadi Liakhovetski <lg@denx.de>
17 years ago
|
|
|
#define CONFIG_DEFAULT_SPI_BUS 1
|
|
|
|
|
#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_2 | SPI_CS_HIGH)
|
|
|
|
|
|
|
|
|
|
#define CONFIG_RTC_MC13783 1
|
|
|
|
|
/* MC13783 connected to CSPI2 and SS0 */
|
|
|
|
|
#define CONFIG_MC13783_SPI_BUS 1
|
|
|
|
|
#define CONFIG_MC13783_SPI_CS 0
|
|
|
|
|
|
|
|
|
|
/* allow to overwrite serial and ethaddr */
|
|
|
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
|
#define CONFIG_CONS_INDEX 1
|
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
|
#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
|
|
|
|
|
|
|
|
|
|
/***********************************************************
|
|
|
|
|
* Command definition
|
|
|
|
|
***********************************************************/
|
|
|
|
|
|
|
|
|
|
#include <config_cmd_default.h>
|
|
|
|
|
|
|
|
|
|
#define CONFIG_CMD_MII
|
|
|
|
|
#define CONFIG_CMD_PING
|
|
|
|
|
#define CONFIG_CMD_SPI
|
|
|
|
|
#define CONFIG_CMD_DATE
|
|
|
|
|
|
|
|
|
|
#define CONFIG_BOOTDELAY 3
|
|
|
|
|
|
|
|
|
|
#define CONFIG_NETMASK 255.255.255.0
|
|
|
|
|
#define CONFIG_IPADDR 192.168.23.168
|
|
|
|
|
#define CONFIG_SERVERIP 192.168.23.2
|
|
|
|
|
|
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
|
|
|
"bootargs_base=setenv bootargs console=ttySMX0,115200\0" \
|
|
|
|
|
"bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \
|
|
|
|
|
"bootcmd=run bootcmd_net\0" \
|
|
|
|
|
"bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; tftpboot 0x80000000 uImage-mx31; bootm\0" \
|
|
|
|
|
"prg_uboot=tftpboot 0x80000000 u-boot-imx31_litekit.bin; protect off all; erase 0xa00d0000 0xa01effff; cp.b 0x80000000 0xa00d0000 $(filesize)\0"
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#define CONFIG_NET_MULTI
|
|
|
|
|
#define CONFIG_SMC911X 1
|
|
|
|
|
#define CONFIG_SMC911X_BASE (CS4_BASE + 0x00020000)
|
|
|
|
|
#define CONFIG_SMC911X_32_BIT 1
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Miscellaneous configurable options
|
|
|
|
|
*/
|
|
|
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
|
|
|
#define CONFIG_SYS_PROMPT "uboot> "
|
|
|
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
|
|
|
/* Print Buffer Size */
|
|
|
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
|
|
|
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
|
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
|
|
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */
|
|
|
|
|
#define CONFIG_SYS_MEMTEST_END 0x10000
|
|
|
|
|
|
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0 /* default load address */
|
|
|
|
|
|
|
|
|
|
#define CONFIG_SYS_HZ 1000
|
|
|
|
|
|
|
|
|
|
#define CONFIG_CMDLINE_EDITING 1
|
|
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
|
|
|
* Stack sizes
|
|
|
|
|
*
|
|
|
|
|
* The stack sizes are set up in start.S using the settings below
|
|
|
|
|
*/
|
|
|
|
|
#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
|
|
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
|
|
|
* Physical Memory Map
|
|
|
|
|
*/
|
|
|
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
|
|
|
#define PHYS_SDRAM_1 CSD0_BASE
|
|
|
|
|
#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
|
|
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
|
|
|
* FLASH and environment organization
|
|
|
|
|
*/
|
|
|
|
|
#define CONFIG_SYS_FLASH_BASE CS0_BASE
|
|
|
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
|
|
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
|
|
|
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */
|
|
|
|
|
|
|
|
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x001f0000)
|
|
|
|
|
#define CONFIG_ENV_IS_IN_FLASH 1
|
|
|
|
|
#define CONFIG_ENV_SECT_SIZE (64 * 1024)
|
|
|
|
|
#define CONFIG_ENV_SIZE (64 * 1024)
|
|
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
|
|
|
* CFI FLASH driver setup
|
|
|
|
|
*/
|
|
|
|
|
#define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */
|
|
|
|
|
#define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */
|
|
|
|
|
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */
|
|
|
|
|
#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use hardware sector protection */
|
|
|
|
|
|
|
|
|
|
/* timeout values are in ticks */
|
|
|
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT (100*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
|
|
|
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT (100*CONFIG_SYS_HZ) /* Timeout for Flash Write */
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* JFFS2 partitions
|
|
|
|
|
*/
|
|
|
|
|
#undef CONFIG_CMD_MTDPARTS
|
|
|
|
|
#define CONFIG_JFFS2_DEV "nor0"
|
|
|
|
|
|
|
|
|
|
#endif /* __CONFIG_H */
|
