Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
52387 Commits
3 Branches
0 Tags
148 MiB
Tag: Branch: Tree: 47cef9c805
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '47cef9c805'
${ noResults }
u-boot/configs/bubblegum_96_defconfig

24 lines
574 B
Raw Normal View History Unescape

board: Add uCRobotics Bubblegum-96 board support This commit adds uCRobotics Bubblegum-96 board support. This board is one of the 96Boards Consumer Edition platform based on Actions Semi S900 SoC. Features: - Actions Semi S900 SoC (4xCortex A53, Power VR G6230 GPU) - 2GiB RAM - 8GiB eMMC, uSD slot - WiFi, Bluetooth and GPS module - 2x Host, 1x Device USB port - HDMI - 20-pin low speed and 40-pin high speed expanders, 6 LED, 3 buttons U-Boot will be loaded by ATF at EL2 execution level. Relevant driver support will be added in further commits. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
7 years ago
CONFIG_ARM=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
6 years ago
CONFIG_ARM_SMCCC=y
board: Add uCRobotics Bubblegum-96 board support This commit adds uCRobotics Bubblegum-96 board support. This board is one of the 96Boards Consumer Edition platform based on Actions Semi S900 SoC. Features: - Actions Semi S900 SoC (4xCortex A53, Power VR G6230 GPU) - 2GiB RAM - 8GiB eMMC, uSD slot - WiFi, Bluetooth and GPS module - 2x Host, 1x Device USB port - HDMI - 20-pin low speed and 40-pin high speed expanders, 6 LED, 3 buttons U-Boot will be loaded by ATF at EL2 execution level. Relevant driver support will be added in further commits. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
7 years ago
CONFIG_ARCH_OWL=y
CONFIG_SYS_TEXT_BASE=0x11000000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
6 years ago
CONFIG_TARGET_BUBBLEGUM_96=y
board: Add uCRobotics Bubblegum-96 board support This commit adds uCRobotics Bubblegum-96 board support. This board is one of the 96Boards Consumer Edition platform based on Actions Semi S900 SoC. Features: - Actions Semi S900 SoC (4xCortex A53, Power VR G6230 GPU) - 2GiB RAM - 8GiB eMMC, uSD slot - WiFi, Bluetooth and GPS module - 2x Host, 1x Device USB port - HDMI - 20-pin low speed and 40-pin high speed expanders, 6 LED, 3 buttons U-Boot will be loaded by ATF at EL2 execution level. Relevant driver support will be added in further commits. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
7 years ago
CONFIG_IDENT_STRING="\nBubblegum-96"
CONFIG_DISTRO_DEFAULTS=y
configs: Migrate CONFIG_NR_DRAM_BANKS We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: Tom Rini <trini@konsulko.com>
6 years ago
CONFIG_NR_DRAM_BANKS=1
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
6 years ago
CONFIG_BOOTDELAY=5
board: Add uCRobotics Bubblegum-96 board support This commit adds uCRobotics Bubblegum-96 board support. This board is one of the 96Boards Consumer Edition platform based on Actions Semi S900 SoC. Features: - Actions Semi S900 SoC (4xCortex A53, Power VR G6230 GPU) - 2GiB RAM - 8GiB eMMC, uSD slot - WiFi, Bluetooth and GPS module - 2x Host, 1x Device USB port - HDMI - 20-pin low speed and 40-pin high speed expanders, 6 LED, 3 buttons U-Boot will be loaded by ATF at EL2 execution level. Relevant driver support will be added in further commits. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
7 years ago
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyOWL5,115200n8"
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
6 years ago
CONFIG_SYS_PROMPT="U-Boot => "
board: Add uCRobotics Bubblegum-96 board support This commit adds uCRobotics Bubblegum-96 board support. This board is one of the 96Boards Consumer Edition platform based on Actions Semi S900 SoC. Features: - Actions Semi S900 SoC (4xCortex A53, Power VR G6230 GPU) - 2GiB RAM - 8GiB eMMC, uSD slot - WiFi, Bluetooth and GPS module - 2x Host, 1x Device USB port - HDMI - 20-pin low speed and 40-pin high speed expanders, 6 LED, 3 buttons U-Boot will be loaded by ATF at EL2 execution level. Relevant driver support will be added in further commits. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
7 years ago
CONFIG_CMD_MD5SUM=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIMER=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
6 years ago
CONFIG_DEFAULT_DEVICE_TREE="bubblegum_96"
board: Add uCRobotics Bubblegum-96 board support This commit adds uCRobotics Bubblegum-96 board support. This board is one of the 96Boards Consumer Edition platform based on Actions Semi S900 SoC. Features: - Actions Semi S900 SoC (4xCortex A53, Power VR G6230 GPU) - 2GiB RAM - 8GiB eMMC, uSD slot - WiFi, Bluetooth and GPS module - 2x Host, 1x Device USB port - HDMI - 20-pin low speed and 40-pin high speed expanders, 6 LED, 3 buttons U-Boot will be loaded by ATF at EL2 execution level. Relevant driver support will be added in further commits. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
7 years ago
CONFIG_CLK=y
CONFIG_CLK_OWL=y
CONFIG_CLK_S900=y
CONFIG_OWL_SERIAL=y